Rosemount Displacer Float Level Switch with Alarm for Liquid Level Control

China Rosemount Displacer Float Level Switch with Alarm for Liquid Level Control, Find details about China Displacer Level Switch, Level Switch from Rosemount Displacer Float Level Switch with Alarm for Liquid Level Control

Basic Info.

Certification

Customized

Name

Displacer Level Transmitter

Temperature

-196° to 400° C

Pressure

1 MPa to 40 MPa

Trademark

Transport Package

Wooden Case

Specification

customized

Origin

Dandong

HS Code

9026100000

Certification

Customized

Name

Displacer Level Transmitter

Temperature

-196° to 400° C

Pressure

1 MPa to 40 MPa

Trademark

Transport Package

Wooden Case

Specification

customized

Origin

Dandong

HS Code

9026100000

Product Desciption

UTK Displacer Level Controller

Summary

Measuring element of UTK displacer level controller is ball float or displacer, measuring element is connected with magnet tube. When level raised, magnet tube moves up and enters external magnetic field. Through magnet induction effect or magnet coupling effect, the magnet controlling switch or offset magnet steel is pulled and makes switch contact on or off. When level goes down, the magnet tube moves down and goes out off the external magnet field. Then the magnetic controlling switch backs to the original state or the offset magnet steel goes down back to new balance position under the action of self-weight, then makes switch contact on or off. In this way, it realizes level controlling and alarming.

Main technical parameter

Nominal pressure: ≤16.0MPa;
Measuring accuracy: level controlling: ±4mm;
interface controlling: ±6mm;
Flange standard: HG/T20592-2009,
HG/T20615-2009 or on request
Ambient temperature: -40ºC~+80ºC
Operating temperature: -40ºC~150ºC
(high temperature type: 300ºC)
Medium density: level controller: ρ≥0.5g/cm³
interface controller: ρ1 - ρ2≥0.25g/cm³
Medium viscosity: ≤ 1St (10^-4m²/s)
Wetted material: 20, 304, 316L or on request
Power supply inlet: G1/2″ (female thread)
or on request
Explosion-proof: ExdCT4-T6,
ExiaCT4-T6
Protection class: IP67
Relative equipment: safety barrier (see safety barrier recommendation sheet)

Contact capacity:

Switch type	Max. voltage AC	Max. current (A)	Contact point number	Contact resistance (≯Ω)	Switching speed (≯ms)	Service life (≮ 10⁴ times)
Reed switch	250V	1	SPDT	0.03	3	50
Microswitch	250V	5	SPDT	0.03	3	50

Note: 24V DC is only for intrinsically safe.

UTK Displacer Level Controller

Controlling range:

For level controlling

Model	Measuring element	Controlling position	Max.pressure MPa	Nominal diameter	Alarming setting-point B (mm)	Range H (mm)	Remark
UTK100	Ball float	Upper Or lower limit	6.3	DN40	On request		Controlling position non-adjustable
UTK300	Displacer	Upper Or lower limit	4.0	DN80	On request		Controlling position is adjustable; The rang of upper limit and low limit are adjustable.
UTK300	Displacer	Upper and lower limits	4.0	DN80	On request	On request
UTK400	Displacer	Upper Or lower limit	16.0	DN40	On request		Controlling position non-adjustable

For interface controlling:

Model	Controlling position	Max.pressure MPa	Min.density	Min.density difference	Alarming setting-point B (mm)
			g/cm³
Ball-float	Upper or lower limit	4.0	0.5	0.25	On request

UTK Displacer Level Controller

Model selection table

UTK-100

Model	Code								Code meaning
UTK-									Displacer level controller
	100								Flange sealing
		A							Normal type
		B							Side-bottom mounted
		C							Side-side mounted
		D							Side-side mounted
			1						Reed switch
			3						Microswitch
				X					Upper limit or low limit
					*				Medium density (g/cm³)
						-
							*		Alarm setting-point (distance to upper interface flange mm)
								i	Intrinsically safe
								d	Explosion isolating
UTK- -

Example: UTK-100D3X0.8-178i is flange sealing, side-side mountedtype, microswitch, upper or low limit alarm, medium density is 0.8g/cm³, alarm setting-point is 178mm, intrinsically safe displacer level controller.

UTK-300, UTK-400

Model	Code							Code meaning
UTK-								Displacer level controller
	300							Top mounted
	400							High pressure type (side-side mounted)
		1						Reed switch
		3						Microswitch
			X					Upper or lower limit
			Y					Upper and lower limit (only for UTK300)
				*				Medium density (g/cm³)
					-
						*		Alarm setting-point (distance to upper interface flange mm)
							i	Intrinsically safe
							d	Explosion isolating
UTK- -

Example: UTK-4003X0.8-178i is high pressure type, microswitch, upper or lower limit alarm, medium density is 0.8g/cm³, alarm setting-point is 178mm, intrinsically safe displacer level controller.

Order requirements

Operating medium
Operating pressure
Operating temperature
Flange standard
Wetted material
Medium density
Alarm setting-point
Other special requirement