1.1Introduction
LYNSB- Ultrasonic Gas Flow Meter (hereafter call Ultrasonic Meter) is the key and newly designed product with cutting-edge technology. It can be used in process measuring and custody transfer metering in fields such as gas production of oilfields,energy, and environmental protection. Compared with traditional flowmeters,
Ultrasonic Meter with remarkable performance like low pressure, low velocity, no pressure loss, high accuracy, is becoming the most advanced and quickly developed new flowmeter.

1.2 WorkingTheory
Ultrasonic wave is sonic wave with frequency larger than 20000Hz featured with better directionality, penetration and energy concentration, which makes Ultrasonic Meter the new advance flowmeter.
Ultrasonic Meter uses theory of acoustic transit time, as in Fig 1-1:
                                                          

Transducer A (Upstream) sends ultrasonic wave that transits in the pipe and will make total reflection when it touch the smooth and high hardness pipe bottom, and then it goes to B(Downstream) transducer that will receive this wave, which make one sonic path. After B receives the wave, it will send another ultrasonic wave that to be received by A. As the medium is actually carrier of sonic wave, when it flows, the transit time will be different with different flow velocity, which will result in flow velocity and flowrate after calculation of mathematical model.
Flow velocity:

Sound velocity:

Flowrate:

Where:
  V: Gas flow velocity (m/s)
  C: Sound velocity (m/s)
  F: Volume of flowing medium (m3/h)
  D: Diameter of pipe (m)
  : Angle of path to the flow (o)
  : Transit time from transducer A to B (s)
  : Transit time from transducer B to A (s)
  : Sound delay time by circuit, cable and transducer from A to B/ Sound delay time by circuit, cable and transducer from B to A (s)

• Features 

1. Wide turndown ratio, up to 1:30;
2. Bi-direction measurement, suitable for small working pressure and low flow velocity;
3. Multi-path measurement can reduce the influence of turbulent flow, and the meter can also work normally when one path broken down;
4. No movable parts inside, near no pressure drop, little maintenance;
5. Self-diagnose function will help to judge, correct and alarm for failures, thus reduce measurement loss;
6. It can output flowrate in standard condition after temperature and pressure compensation.  
   < >Ultrasonic MeterIn long transportation line of natural gas;
7. In city gas;
8. For well head gas in oilfield;
9. Boiler gas;
10. In large gasification process;
11. Industrial waste gas and torch gas.

2. Product Performance

2.1 Performance 

2.2 Flow Range

2.3 Current Output 4~20mA

2.4 Positive Frequency Output

2.5 RS485 Output

2.6 Working Condition 

2.7 Power Consumption

2.8 Weight 

Note: the above weight is for Ultrasonic Meter with PN=1.6mpa






Why Yinuo
(1) For electronic products, we have automatic chip mounter (SMT) production line and high/low temp. testing equipment.
(2) For mechanical products, we have advantage on casting, machining, and welding.
(3) For calibration, we have calibration facilities approved by China government for oil, water and gas.
(4) For flowmeter, we are Top leaders in China for both of Coriolis Mass Flowmeter & PD flowmeter, which be approved the UL, CE, CCS (China) and BV certificate (France) for marine market.
(5) For pump, we combined Russian military technology with China low cost to manufacture for large capacity transportation of oil, chemical, water, and wastewater even if contain some participles and we also design and produce twin-screw pump for high pressure, high viscosity liquid with multiphase.
(6) For SCADA loading & metering/ Skid Mount System, we also have much experience in China and in Afghanistan, Angola, Equatorial Guinea, Myanmar and are trying to promote in all over the world.