High Quality Tecumseh Condensing Unit for Air Cooler Cold Storage
China High Quality Tecumseh Condensing Unit for Air Cooler Cold Storage, Find details about China Commercial Refrigeration, Industrial Refrigeration from High Quality Tecumseh Condensing Unit for Air Cooler Cold Storage
Basic Info.
Model NO.
ESPA series
Trademark
ESACIR
Specification
CE
Origin
Guangdong, China
HS Code
8418692090
Model NO.
ESPA series
Trademark
ESACIR
Specification
CE
Origin
Guangdong, China
HS Code
8418692090
Product Desciption
1.Cold room or cold storage Mono-block Condensing unit general introduction
a)Low Noise
b)High Efficient and Energy Saving
c)Easy Operation and Installation
d)Compact Exterior
e)High quality and efficiency
f)Competitive price
2. Cold room or cold storage Mono-block Condensing unit Main Components
1) World famous brand refrigeration parts are employed for all products;
2) TECUMSEH Hermetic compressor;
3) Heat Exchanger with high efficient in grooved copper tube and aluminum fin
4) Electronic control board with functions of automatic temperature set, control, and electric heater defrosting.
5) Protection devices for over loading, sub-heating, lack of phase, high & low pressure etc.
3. Cold room or cold storage Mono-block Condensing unit Features
1) With very compact structure
2) With TECUMSEH hermetic compressor or Danfoss brand compressor
3) With high-efficiency in-grooved copper tube and aluminum fin heat exchanger
4) With word famous brand refrigeration parts
5) Electronic boards are with functions of automic temperature set,control,and electric heater defrosting
6) Protection devices for over loading,over heating,lack of phase,high&low pressure,etc
7) Safe, easy, and low cost for installation and operation
4. Condensing unit series:
A: Wall/Roof mounted monoblock condensing unit
B:Box type Emerson Copeland compressor condensing unit
C: Box type Bitzer piston compressor condensing unit
D: Open type Bitzer piston compressor condensing unit
E:Open type Bitzer 2-stage compressor condensing unit
F: Bitzer Semi-hermetic piston compressor racks condensing unit
G: Bitzer Semi-hermetic screw compressor racks condensing unit
H: Hanbell Semi-hermetic screw compressor racks condensing unit
5.About US:
1) With more certificate
2) Professional team with over more than 10 years industry knowledge
3) Oversea installation.
4) Customer-made accepted.
5) Gold member of Made-In-China
6) Audited supplier by SGS
6:FAQ
Q:Is there oversea service for installation?
No. The cold room is easy to install. No need to do this. You can install by yourself within 3 hours, need to lock the PU panels and mounted monoblock. We also have the engineer to guide you on line and the on line installation video.
A:How you pack the panels to avoid the damage?
Our standard package: Plastic film package can protect the PU panels well, hard to tear.
FCL: plastic film package; LCL: plastic film package with wooden pallet.
Besides, we can also do the wooden packing if you need.
Q:How to calculate the electricity power of cold room?
A:If you use monoblock unit, the electricity power = input x hours
If you use split system, the electricity power = (Condensing unit input + evaporator input) x hours
In summer, hour is 18 hours. In winter, hour is 12 hours
7. Installation instructions and project photo
1) The unit should be fixed at the site where the air is easy to flow, and far away from heat source;
2) In the storage building, the fixing hole for the unit should be made before the installation. The side of the hole should be made of wood, strong enough to support the unit.
3) Good quality wood should be embedded at the hole for bold fixing;
4) Fix the unit on the body of the storage room with bolts;
5) Seal the hole around the unit with sealing material;
6) Drainage pipe fixing:
Fix the drainage pipe on the drainage mouth of the evaporator with pipe clam, ensure the direction is correct and the water could flow smoothly;
7) Electrical system fixing:
(1)Check the conformity of voltage the main power supply to that of name plate, the tolerance is ±10%;
(2)Air switch is required to ensure safety and flexibility.
(3)Grounding must be reliable;
8)Trial operation of the unit
(1)Verify that the electrical connection is correct before start the unit;
(2)Add water to the pan of evaporator until there can be see water comes out from the of drainage pipe at the condenser side;
(3)Close the air switch, one minute later, the indicator of the fan and refrigeration on the control panel will be on, means the operation is normal. Keep watch until operation is stable.
8. Product deliver and pack:
A:For cold room machine:
Standard package f with plywood, the unit can be well protected, it is with pallet on the bottom for easy transportation., the unit can be well protected Suitable for container shipment.
B:For cold room panel:
Plastic film for panel,Each panel is well wrapped with plastic film respectively, the corner is protected with brown paper.
a)Low Noise
b)High Efficient and Energy Saving
c)Easy Operation and Installation
d)Compact Exterior
e)High quality and efficiency
f)Competitive price
| Condensing Unit(Monoblock-Rooftop Type) | ||||||||||||
| Model ESPA~ | 50NJWMTY | 63NJWMTY | 100NJWMTY | 125NJWMTY | 175NJWMTY | |||||||
| Cooling Capacity (W) | 984 | 1161 | 1652 | 2351 | 3075 | |||||||
| Power Input (KW) | 0.7 | 0.79 | 1.05 | 1.34 | 1.99 | |||||||
| Power supply | 220V/1Ph/50HZ | |||||||||||
| Temp. range (ºC) | 5~-5 | |||||||||||
| Cond fan(W) | 1×75 | 1×75 | 1×80 | 1×80 | 1×155 | |||||||
| Evap fan(W) | 1×75 | 1×75 | 1×80 | 1×80 | 1×155 | |||||||
| Defrost type | Hot gas | |||||||||||
| Throttle type | Expansion valve | |||||||||||
| Refrigerant | R404A | |||||||||||
| Weight(kg) | 120 | 120 | 133 | 133 | 176 | |||||||
| Note: | ||||||||||||
| 1.Cooling capacity based on: Evaporator temp.:-7ºC,condensing temp.:45ºC. | ||||||||||||
| 2.Specifications are subject to change without notice for further improvement. | ||||||||||||
| Model ESPA~ | 50NKWMTY | 63NKWMTY | 100NKWMTY | 150NKWMTY | 200NKWMTY | 300NKWMTY | ||||||
| Cooling Capacity (W) | 390 | 514 | 1005 | 1303 | 1882 | 2528 | ||||||
| Power Input (KW) | 0.49 | 0.58 | 0.98 | 1.3 | 2 | 2.29 | ||||||
| Power supply | 220V/1Ph/50HZ | 380V/3Ph/50HZ | ||||||||||
| Temp. range (ºC) | -15~-20 | |||||||||||
| Cond fan(W) | 1×75 | 1×75 | 1×80 | 1×80 | 1×155 | 1×155 | ||||||
| Evap fan(W) | 1×75 | 1×75 | 1×80 | 1×80 | 1×155 | 1×155 | ||||||
| Defrost type | Hot gas | |||||||||||
| Throttle type | Expansion valve | |||||||||||
| Refrigerant | R404A | |||||||||||
| Weight(kg) | 120 | 120 | 133 | 135 | 176 | 176 | ||||||
| Note: | ||||||||||||
| 1.Cooling capacity based on: Evaporator temp.:-25ºC,condensing temp.:45ºC. | ||||||||||||
| 2.Specifications are subject to change without notice for further improvement. | ||||||||||||
2. Cold room or cold storage Mono-block Condensing unit Main Components
1) World famous brand refrigeration parts are employed for all products;
2) TECUMSEH Hermetic compressor;
3) Heat Exchanger with high efficient in grooved copper tube and aluminum fin
4) Electronic control board with functions of automatic temperature set, control, and electric heater defrosting.
5) Protection devices for over loading, sub-heating, lack of phase, high & low pressure etc.
3. Cold room or cold storage Mono-block Condensing unit Features
1) With very compact structure
2) With TECUMSEH hermetic compressor or Danfoss brand compressor
3) With high-efficiency in-grooved copper tube and aluminum fin heat exchanger
4) With word famous brand refrigeration parts
5) Electronic boards are with functions of automic temperature set,control,and electric heater defrosting
6) Protection devices for over loading,over heating,lack of phase,high&low pressure,etc
7) Safe, easy, and low cost for installation and operation
4. Condensing unit series:
A: Wall/Roof mounted monoblock condensing unit
B:Box type Emerson Copeland compressor condensing unit
C: Box type Bitzer piston compressor condensing unit
D: Open type Bitzer piston compressor condensing unit
E:Open type Bitzer 2-stage compressor condensing unit
F: Bitzer Semi-hermetic piston compressor racks condensing unit
G: Bitzer Semi-hermetic screw compressor racks condensing unit
H: Hanbell Semi-hermetic screw compressor racks condensing unit
5.About US:
1) With more certificate
2) Professional team with over more than 10 years industry knowledge
3) Oversea installation.
4) Customer-made accepted.
5) Gold member of Made-In-China
6) Audited supplier by SGS
6:FAQ
Q:Is there oversea service for installation?
No. The cold room is easy to install. No need to do this. You can install by yourself within 3 hours, need to lock the PU panels and mounted monoblock. We also have the engineer to guide you on line and the on line installation video.
A:How you pack the panels to avoid the damage?
Our standard package: Plastic film package can protect the PU panels well, hard to tear.
FCL: plastic film package; LCL: plastic film package with wooden pallet.
Besides, we can also do the wooden packing if you need.
Q:How to calculate the electricity power of cold room?
A:If you use monoblock unit, the electricity power = input x hours
If you use split system, the electricity power = (Condensing unit input + evaporator input) x hours
In summer, hour is 18 hours. In winter, hour is 12 hours
7. Installation instructions and project photo
1) The unit should be fixed at the site where the air is easy to flow, and far away from heat source;
2) In the storage building, the fixing hole for the unit should be made before the installation. The side of the hole should be made of wood, strong enough to support the unit.
3) Good quality wood should be embedded at the hole for bold fixing;
4) Fix the unit on the body of the storage room with bolts;
5) Seal the hole around the unit with sealing material;
6) Drainage pipe fixing:
Fix the drainage pipe on the drainage mouth of the evaporator with pipe clam, ensure the direction is correct and the water could flow smoothly;
7) Electrical system fixing:
(1)Check the conformity of voltage the main power supply to that of name plate, the tolerance is ±10%;
(2)Air switch is required to ensure safety and flexibility.
(3)Grounding must be reliable;
8)Trial operation of the unit
(1)Verify that the electrical connection is correct before start the unit;
(2)Add water to the pan of evaporator until there can be see water comes out from the of drainage pipe at the condenser side;
(3)Close the air switch, one minute later, the indicator of the fan and refrigeration on the control panel will be on, means the operation is normal. Keep watch until operation is stable.
8. Product deliver and pack:
A:For cold room machine:
Standard package f with plywood, the unit can be well protected, it is with pallet on the bottom for easy transportation., the unit can be well protected Suitable for container shipment.
B:For cold room panel:
Plastic film for panel,Each panel is well wrapped with plastic film respectively, the corner is protected with brown paper.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover