1.The FG series Fluid Bed Dryer can be widely used in pharmaceutical,chemical,foodstuff industry etc.

2.The FG series  Fluid Bed Dryer is one of the standard process equipment in the solid preparation production.for example:the production of tablets,granules and other wet granules.

3.The FG series Fluid Bed Drye has many fuctions.such as mixing,granulating etc.and used for fast dry & wet mixing, homogenizing,humidifying and granulating of the powder.
  
 

2. Working principle of Fluid bed dryer for pharmaceutical:
1.The FG series  Fluid Bed Drye is composed of main machine (processor), air handling unit(AHU), heating and control systems. When operating, charge the materials into the Bowl, set the procedure and parameters according to process requirements
2.Start the processor.The inlet air is filtered by the air handling unit(AHU)and heated by the heating system

3.The processed air enters the processor to blow up materials into fluidization condition. Materials are apace dried and moisture rapidly vaporized.

4.When the operation has been finished; Move out the Bowl to lock with pharma Lifter for FBD/FBG Bowl for lifting and discharging the produced granules.

5.During the whole process, powder dust and cross pollution are effectively controlled.

 



3. Features of Fluid bed dryer for pharmaceutical:

* The structure of fluidized bed is round so as to avoid dead corner.

* Inside of the hopper there is a stirrer in order to avoid agglomeration of raw materials and forming flow.

* The granules is discharged through the method of turning over. In this way it is very convenient and full. 

* It is operated at the conditions of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient in clean. It is an ideal equipment that is in conformity with the requirement of GMP.

* The drying speed is fast and the temperature is uniform. In general, the drying time is 15-45 minutes for each batch

4. Parameters of Fluid bed dryer for pharmaceutical:

                                                                    Factory

                                                                   Test Center

                                                               Certification