China Factory Price Programmable Logic Controller GSM/SMS/GPRS PLC (Programmable Relay EXM-12DC-DA-RT-4GWIFI), Find details about China GSM PLC, Programmable Logic Controller from Factory Price Programmable Logic Controller GSM/SMS/GPRS PLC (Programmable Relay EXM-12DC-DA-RT-4GWIFI)
Power supply: | ||
Nominal voltage | DC 12-24V | |
Operating limits | DC 10.8-28.8V | |
Immunity from micro power cuts | Typ.5 ms | |
Max. Startup current | Max. 0.25A | |
Max. absorbed power | 3.5 W (10.8V dc) ; 4 W (28.8V dc) | |
Protection against polarity inversions | Yes | |
Input parameters: | ||
Input No | 8 ( I1-I8 ) | |
Digital input | 8 ( I1-I8 ) | |
Analogue input | 4 ( I1-I4)(0..10V DC) | |
Digital inputs( I5-I8 ) : | ||
Input voltage | DC0-28.8V | |
Input signal0 | < 5V DC; <1mA | |
Input signal1 | > 8 V DC;>1.7mA | |
Input current | 2.3mA @ 10.8V dc 2.6mA @ 12.0 V dc 5.2 mA @ 24 V dc 6.3 mA @ 28.8 V dc | |
Response time | 0 to 1 :<1 ms ;1 to 0 :<1 ms | |
Maximum counting frequency | 60k Hz(I7--I8) | |
Sensor type | Contact or 3-wire PNP | |
Input type | Resistive | |
Isolation between power supply and inputs | None | |
Isolation between inputs | None | |
Inputs used as digital inputs( I1-I4 ): | ||
Input voltage | DC0-28.8V | |
Input signal0 | < 5V DC;<0.1mA | |
Input signal1 | > 8 V DC;>0.3mA | |
Input current | 0.4mA @ 10.8V dc 0.5mA @ 12.0 V dc 1.2mA @ 24 V dc 1.5mA @ 28.8 V dc | |
Response time | 0 to 1 :Typ. 1.5 ms ;1 to 0 :Typ. 1.5 ms | |
Maximum counting frequency | Typ.:4 HZ | |
Sensor type | Contact or 3-wire PNP | |
Input type | Resistive | |
Isolation between power supply and inputs | None | |
Isolation between inputs | None | |
Inputs used as analog inputs( I1-I4 ): | ||
Measurement range | DC 0---10V | |
Input impedance | Min, 24KΩ ; Max. 72KΩ | |
Input voltage | 28.8 V DC max | |
Resolution | 10bit ,0.01V | |
Accuracy at 25 °C | ± (Max.0.02)V | |
Accuracy at 55 °C | ± (Max.0.04)V | |
Isolation between analog channel and power supply | None | |
Cable length | 10 m max. shielded and twisted | |
Output parameters: | ||
Output No. | 4 (Q1-Q4) | |
Output type | 2Relay output +2 Transistor(PNP) output | |
Continuous current | (Q1-Q2)Resistive load 10A/Inductive load 2A (Q3-Q4) Max. 0.3 A per channel | |
Max. breaking voltage | (Q1-Q2) AC 250 V DC 30 V (Q3-Q4) ≤ Supply voltage | |
Max. Allowable Power Force | (Q1-Q2)1250VA 300W (Q3-Q4) 9 W | |
Electrical durability Expectancy | 105 Operations at Rated Resistive Load | |
Mechanical life | 107 Operations at No Load condition | |
Response time | Operate Time : 15 mSec. Max. Release Time : 10 mSec. Max. | |
Built-in protections | Against overloads and short-circuits: No Against overvoltages (*): No | |
Galvanic isolation | None | |
PWM frequency(Q3-Q4) | 1K HZ | |
PWM cyclic ratio(Q3-Q4) | 0 to 100 % | |
PWM accuracy at 120Hz(Q3-Q4) | < 0.5 % (20 % - 80 %) load at 10 mA | |
Max. Breaking current PWM(Q3-Q4) | 50 mA | |
Switch frequency: | ||
Mechanism | 10Hz | |
Resistor/light load | 2Hz | |
Sensitive load | 0.5Hz | |
Built-in wireless parameters: | ||
Support 802.11b/g/n wireless standards | ||
Support TCP/IP/UDP network protocols | ||
Support work as STA/AP mode | ||
Support Router/Bridge mode networking | ||
Support Transparent/Agreement Transmission Mode(Transparent used by EXM CPU) | ||
Support Friendly Web Configuration Page or configuration by eSmsconfig | ||
Outdoor 100m with 3dBi antenna and indoor 40m | ||
FCC /CE Certificated | ||
GSM parameter | ||
Type of mobile wireless service | SMS, GPRS | |
Type of mobile network / is supported | GSM, UMTS, LTE | |
Operating frequency
| B1/B3/B5/B7/B8/B20 B1/B5/B8 850/900/1800/1900Mhz | |
Other parameters: | ||
Ethernet port: | Built-In(10M/100M) | |
Xlogic<--->Xlogic(byWifit) | one xlogic works as server can connect 32 client xlogics. | |
Xlogic<--->Etherne/Internet: | xlogic works as TCP server or TCP client | |
Weight |