Small Heavy Load Worm Drive Swivel Drive

China Small Heavy Load Worm Drive Swivel Drive, Find details about China Slewing Drive, Timber Grab from Small Heavy Load Worm Drive Swivel Drive

Model NO.
SC7-71-RH
IP Class
IP65
Static Axial Load
133kn.M
Static Radial Laod
53 Kn.M
Dynamic Axial Rating
32kn
Dynamic Radial Rating
28kn
Color
Grey
Mounting Bolts
M12
Trademark
Coresun Drive
Transport Package
Standard Wooden Case
Specification
SC7-71-RH
Origin
Changzhou
HS Code
8483409000
Model NO.
SC7-71-RH
IP Class
IP65
Static Axial Load
133kn.M
Static Radial Laod
53 Kn.M
Dynamic Axial Rating
32kn
Dynamic Radial Rating
28kn
Color
Grey
Mounting Bolts
M12
Trademark
Coresun Drive
Transport Package
Standard Wooden Case
Specification
SC7-71-RH
Origin
Changzhou
HS Code
8483409000
SC7 slewing drive bearing swivel drive for Rotation Equipment

Model

SC7

Place of Origin

Changzhou,China

Brand

Coresun Drive

Delivery Time

7 days

Material

42CrMo,50Mn

Output Torque

1.46kN.m

Tilting Moment Torque

13.5kN.m

Holding Torque

10.4kN.m

Static Axial Rating

133KN

Static Radial Rating

53KN

Dynamic Axial Rating

32KN

Dynamic Radial Rating

28 KN

Gear Ratio

71:1

Efficiency

40%

Hydraulic Motor

M32A

Mounting Bolts

M12

CoreSun - Practical Slewing Drive&Slewing Bearing Promoter.  We are committed to researching, developing and applying high quality, precision transmission equipment products,who provides reliable mechanical actuator for horizonal single axis, dual-axis photovoltaic tracking system, CSP,CPV solar tracking design.Our professional and high-quality products will be also applied well as a steady solution on aerial working platform, truck crane, timber grab, drilling rig, spray equipment, hydraulic module vehicle,automated assembly lines, wind yaw systems,etc

This increased tooth engagement results in greater strength, efficiency and durability.The slewing drive uses standard worm technology in which the worm on the horizontal The speed ratio of the shaft depends on the relationship between the number of threads on the worm and the number of teeth in the worm gear or gear.The specifications of the drive and gear depend on the material of the gear. However, most of the drives and gears typically used consist of steel and phosphor bronze. According to a wide range of tests,chilled nickel-phosphorus bronze ranks first in terms of Wear resistance and deformability

1. The Size, Direction And Nature Of The Load: the slewing drive is suitable for bearing light load, and the roller bearing is suitable for bearing heavy load and impact load.When the rolling bearing is subjected to pure axial load, thrust bearing is generally selected.When the rolling bearing is subjected to pure radial load, deep groove ball bearing or short cylindrical roller bearing are generally selected.Deep groove ball bearing, angular contact ball bearing, tapered roller bearing and self-aligning ball or self-aligning roller bearing can be used when the rotary device is subjected to pure radial load and small axial load at the same time.When the axial load is large, the angular contact ball bearing and tapered roller bearing with large contact Angle can be selected, or the radial bearing and thrust bearing can be combined together, which is especially suitable for high axial load or special requirements of large axial rigidity.
 

2. Allowable Speed: the type of slewing bearing drive varies greatly.Under normal circumstances, low friction, less heat bearing, suitable for high speed.The design should make every effort to work under the condition that the rotary rolling bearing is lower than its speed.
 

3. Rigidity: When the bearing of the rotary driving device bears load, elastic deformation will occur at the contact point between the bearing ring and the rolling body. The deformation is proportional to the load, and the ratio determines the rigidity of the bearing.Generally, bearing rigidity can be improved by pretightening the bearing.In addition, the bearing stiffness can be improved by considering the combination and arrangement of the bearing in the bearing design.


4. Centering Performance And Mounting: After the bearing is loaded into the working position, the mounting and positioning are often poor due to manufacturing error.This is often due to shaft fishing and thermal expansion and other reasons, so that the bearing bear too much load, causing early damage.The self-aligning bearing can overcome the defects caused by the installation error, so it is suitable for this kind of bearing.


5. Installation And Disassembly Of Rotary Driving Device: tapered roller bearing, needle roller bearing and tapered roller bearing, etc., belong to the type of bearing with detachable inner and outer rings (the so-called detachable bearing), which is convenient for installation and disassembly.
 

Small Heavy Load Worm Drive Swivel Drive
Coresun Drive slewing drive SC7 worm slewing drive application:

Small Heavy Load Worm Drive Swivel Drive
Coresun Drive testing reports for heavy load products on measurement, material and finished production
Small Heavy Load Worm Drive Swivel Drive
Small Heavy Load Worm Drive Swivel Drive

CONTACT US

It is sincerely looking forward to cooperating with you for and providing you the best quality product & service with all of our heart!
Small Heavy Load Worm Drive Swivel Drive