Introduction and application:
IEC61032 IEC60529 IP3X Test Probe C With 3N Force is intended to verify the basic protectiion against access to hazardous parts. It's also used to verify the protection against access with the back of the hand. It is the neccessary tool to proceed protecting electric shock test of household and similar electrical appliances.

Test standard:
IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1

Main data:

1,  Test Probe Length :100mm

2,  Test Probe Diameter:2.5mm

3,  Dam- sphere Diameter:35mm

4,  Handle Diameter:10mm

5,  Handle Length 100mm

6,  According to IEC61032 figure 3 (the Test probe C), table 6

Application:

1,  Standard test refers to the joint part can't touch the live parts or close to the hazardous parts, and 35mm circular baffle cannot enter .

2,  In the test requirement for preventing from approaching to the hazardous parts,  Test Probe C/D need to exert a 3±0.3N or 1±0.1N force. 

Purpose:

This probe is aiming at verifying the basic protection against approaching to hazardous parts.

Note:For the without force products,please use with the dynamometer.

Except the IEC61032 IEC60529 IP3X Test Probe C With 3N Force, we also can supply other test equipments, any be interested or needed, please feel free to contact MS Angela Cheng for more help.