Manufacturing Precision Standards: Japanese JIS 1 Class
1. Parameters
1.1 160ton-300ton
| Name | Unit | XPE-160 | XPE-200 | XPE-250 |
| Model | | S | H | S | H | S | H |
| Capacity | Ton | 160 | 200 | 250 |
| Rated tonnage point | mm | 6 | 3 | 6 | 3 | 7 | 3 |
| Stroke | mm | 180 | 130 | 250 | 150 | 280 | 170 |
| Stroke per minute | S. P. M | 30-55 | 40-85 | 20-50 | 35-70 | 20-40 | 30-60 |
| Die height | mm | 450 | 400 | 500 | 450 | 550 | 450 |
| Slide adjustment | mm | 100 | 120 | 120 |
| Slide area | mm | 1600X650 | 1850 X750 | 2300X900 |
| Bolster area | mm | 1800 X760 | 2200X940 | 2500 X1000 |
| Side opening | mm | 700 X450 | 900X600 | 900X600 |
| Main motor | KwxP | 15X4 | 18.5X4 | 22 X 4 |
| Slide adjust device | KwxP | 1X4 | 2X4 | 2X4 |
| Air pressure | Kg/cm2 | 6 | 6 | 6 |
| Presses precision | | GB(JIS)1 class | GB(JIS)1class | GB(JIS)1 class |
1.2 400ton-600ton
| Name | Unit | XPE-300 | XPE-400 | XPE-500 | XPE-600 |
| Model | | S | H | S | H | S | H | S | H |
| Capacity | Ton | 300 | 400 | 500 | 600 |
| Rated tonnage point | mm | 7 | 3 | 7 | 3 | 10 | 6 | 10 | 6 |
| Stroke | mm | 300 | 170 | 300 | 170 | 300 | 180 | 300 | 180 |
| Stroke per minute | S. P. M | 20-35 | 30-50 | 20-30 | 20-40 | 18-25 | 20-30 | 15-25 | 20-30 |
| Die height | mm | 550 | 450 | 550 | 450 | 580 | 480 | 600 | 500 |
| Slide adjustment | mm | 120 | 120 | 120 | 120 |
| Slide area | mm | 2300X900 | A: 2300X1000 | 2900X1000 | 3100X1100 |
| B: 2400X1000 |
| C: 2800X1000 |
| Bolster area | mm | 2500X1000 | A: 2500X1000 | 3300X1200 | 3500X1200 |
| B: 2800X1000 |
| C: 3200X1000 |
| Side opening | mm | 900X600 | 900X600 | 1000X750 | 1100X750 |
| Main motor | KwxP | 30X4 | 37X4 | 45X4 | 55X4 |
| Slide adjust device | KwxP | 2X4 | 2X4 | 3X4 | 3X4 |
| Air pressure | Kg/cm2 | 6 | 6 | 6 | 6 |
| Presses precision | | GB(JIS)1class | GB(JIS)1 class | GB(JIS)1class | GB(JIS)1 class |
2. Technical Descriptions:
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally advanced duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
Dry clutch brake
Standard operating system of xieduan
Operation Method Choice/inch stroke /safe journey/continuation of operating mode
Oil pressure overload protection device
Over-run safety device
Duplex magnetic valve
Misfeed detection device
Electric slider adjusting device
Digital moulding-height indicator (unit: 0.1 mm)
Electric butter lubricating device
Accumulative counter (6 digits)
Pre-determined counter (6 digits)
Maintenance counter (6 digits)
Service Life counter (6 digits)
Electronic rotary cam switch (6 connections)
Air-blast device 1/2" primary circuit
Air source connector 1/2" secondary circuit
Error inspection socket
Power socket (only apply to single-phase 110V power)
Optional Configuration:
Wet clutch brake
Die cushion device
Vs variable-speed motor
Touch-screen device
Photo-electric safety device
Knock-out device on RAM
Main motor inversion device
Foot switch
Safety dog and safety latch
T-type two-hand button operating platform
Inspection variable-connection magnetic valve
Anti-vibration mechanical foot
Quick Die Change Device
Upper die clamper
Lower die clamper
Die lifter
Mould-shift arm
Basic bolt and soleplate
Automatic feeder device
Three-in-one NC straightening feeder
NC Servo Roll feeder
Two-in-one feeder and straightening machine
Leveller