Wireless 433/868/915MHz Lora Shield Signal Transmitter Module

China Wireless 433/868/915MHz Lora Shield Signal Transmitter Module, Find details about China Signal Transmitter, Rfm95W-868s2 from Wireless 433/868/915MHz Lora Shield Signal Transmitter Module

Model NO.
AA303
HS Code
8518900090
Model NO.
AA303
HS Code
8518900090

Wireless 433/868/915Mhz Lora Shield Signal Transmitter module

Package Includes:
Type1

1 X Lora GPS board
1 X antenna 868mhz
1 X screws and nuts set

Type2
1 X Lora GPS board
1 X antenna 915mhz
1 X screws and nuts set

Type3
1 X Lora GPS board
1 X antenna 433mhz
1 X screws and nuts set

Description:
Frequency Band: 868/915/433 MHZ (please mention the frequency you need)
Low power consumption
Compatible with Raspberry Pi 2 Model B/Raspberry Pi 3
LoRa? Modem
FSK, GFSK, MSK, GMSK, LoRa?and OOK modulation
Preamble detection
Baud rate configurable
Built-in temperature sensor and low battery indicator
Excellent blocking immunity
Automatic RF Sense and CAD with ultra-fast AFC
Support DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN)
GPS automatic switching between internal patch antenna and external active antenna
PPS VS. NMEA can be used in time service
Support SDK command
Built-in LNA for better sensitivity
EASY?, advanced AGPS technology without external memory
AlwaysLocate?, an intelligent controller of periodic mode
GPS FLP mode, about 50% power consumption of normal mode
GPS support short circuit protection and antenna detection

Lora Spec:

168 dB maximum link budget.
+20 dBm - 100 mW constant RF output vs.
+14 dBm high efficiency PA.
Programmable bit rate up to 300 kbps.
High sensitivity: down to -148 dBm.
Bullet-proof front end: IIP3 = -12.5 dBm.
Excellent blocking immunity.
Low RX current of 10.3 mA, 200 nA register retention.
Fully integrated synthesizer with a resolution of 61 Hz.
FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
Built-in bit synchronizer for clock recovery.
Preamble detection.
127 dB Dynamic Range RSSI.
Automatic RF Sense and CAD with ultra-fast AFC.
Packet engine up to 256 bytes with CRC.
Built-in temperature sensor and low battery indicator.

GPS Spec:

Power Acquisition:25mA,Power Tracking:20mA.
Compliant with GPS, SBAS.
Programmable bit rate up to 300 kbps.
Serial Interfaces UART: Adjustable 4800~115200 bps,Default: 9600bps.
Update rate:1Hz (Default), up to10Hz.
Protocols:NMEA 0183,PMTK.
Horizontal Position Accuracy:Autonomous <2.5 m CEP.
TTFF@-130dBm with EASY?:Cold Start <15s,Warm Start <5s,Hot start <1s;TTFF@-130dBm.
without EASY?:Cold Start <35s,Warm Start <30s,Hot Start <1s.
Timing Accuracy:1PPS out 10ns,Reacquisition Time <1s.
Velocity Accuracy Without aid <0.1m/s,Acceleration Accuracy Without aid 0.1m/s2.
Sensitivity Acquisition -148dBm,Tracking -165dBm,Reacquisition -160dBm.
Dynamic Performance Altitude Max.18000m,Maximum Velocity Max.515m/s,Maximum Acceleration 4G.
L1 Band Receiver(1575.42MHz) Channel 22 (Tracking) /66 (Acquisition)


Wireless 433/868/915MHz Lora Shield Signal Transmitter Module


Please Specify the frequency you need for Lora Shield. If no specify, 868Mhz will be shipped.
  • Lora Shield v95-868: Load with RFM95W-868S2, support 868M frenquency 
  • Lora Shield v95-915:  Load with RFM95W-915S2, support 915M frenquency
  • Lora Shield v98: Load with RFM98W-433S2, support 433M frenquency






 
Our advantages:
Factory
OEM supported
Short time delivery
Flexible payment
Aftersale service guarantee
Hardware&software technicians supported

Wireless 433/868/915MHz Lora Shield Signal Transmitter Module     Wireless 433/868/915MHz Lora Shield Signal Transmitter Module
Technician: 
We treat every piece of our product as our kid.        Factory: well trained colleagues, over 200 people.

 Wireless 433/868/915MHz Lora Shield Signal Transmitter Module    Wireless 433/868/915MHz Lora Shield Signal Transmitter Module
Sales team: Strong&united sales team                                          Warehouse: Well arrangement makes work happy&effective.
Wireless 433/868/915MHz Lora Shield Signal Transmitter Module
Certificates

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: Full payment. Goods would be shipped in 3-5 work days after payment received, finally depends on quantities.

Q3. What is your terms of delivery?
A: EXW.

Q4. How about your delivery time?
A: Generally, goods would be shipped in 3-5 work days after payment received, finally depends on order quantities.

Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Feel free to contact me if you have any question.