Wear-Resisting Ceramic Coating Used in Industrial Furnaces
China Wear-Resisting Ceramic Coating Used in Industrial Furnaces, Find details about China Refractory, Cement Kilns from Wear-Resisting Ceramic Coating Used in Industrial Furnaces
Basic Info.
Model NO.
RS35
Bulk Density g/cm3
≥2.40
M.S.T ºC
350
Trademark
luming
Transport Package
Pallets or Tons of Bags
Specification
50 kilos per bag
Origin
Jinan, Shandong Province, China
Model NO.
RS35
Bulk Density g/cm3
≥2.40
M.S.T ºC
350
Trademark
luming
Transport Package
Pallets or Tons of Bags
Specification
50 kilos per bag
Origin
Jinan, Shandong Province, China
Product Desciption
Product introduction
Spray paint classification according to material volume density divided into light spray paint, heavy spray paint and heavy spray creep.Light spray coating is used as heat preservation and heat insulation lining, medium and heavy spray coating can be used as heat insulation lining, and heavy spray coating is mainly used as working lining.Spray coatings have become one of the most important amorphous refractory materials used in many industrial furnaces lining.It can be used to build and repair furnace lining and coating into a protective layer under cold state, but also suitable for repair furnace lining under hot state.
Wear resistance with erosion wear volume method for determining: in using temperature conditions, time 15min, medium emery 0.5 ~ 1 cm3 / min, speed 120m/s, sandblasting caliber 8mm, distance 680 mm, Angle 90 ° when measured values.
Performance
Good toughness and wear resistance: adopt without directional mesh, coupling technique, enhance the fracture toughness, effective due to the impact caused by the breakage and spalling.;
High mechanical strength: effective against material impact and shear stress, combining with the system adopt composite strengthening measures and special processing, chemical combination, strength high formation;
Integrity is strong: can finnly adhesion in equipment and piping, no crack, not to drop quickly;
Environmental compatibility good: adopted acid and alkali resistance of synthetic inert materials and won't react to the environment slag sensitivity.
Using Position
Used in cement, steel, thermal power, petrochemical, and other industries strongly flush, strong corrosive materials, severe wear parts.
Company introduction
The company has passed ISO9001 international quality management system certification, ISO14001 environmental management system certification and intellectual property rights certification, and established a sound quality management system and after-sales service system.The company has several independent national intellectual property rights and is recognized as a high-tech enterprise.The company has passed the field inspection certification and issued the certificate by the third party with relevant qualifications. We have a complete set of qualifications and the best products, please rest assured to buy.
The company has no shrinkage grouting material production line and refractory material production line, the introduction of a complete set of advanced testing equipment, the establishment of a sound testing process, to ensure that customers to provide high-quality products and services.
FAQ
Q: Are you a factory or a trading company?
A: We are manufacturer.
Q: What's the MOQ?
A: Our MOQ is 10 Tons.
Q: How long is your delivery time?
A: Delivery time depending on your purchasing quantity and production season.
Q: Can i get free sample?And how long will it take?
A: Samples charge is according to actual cost, and it is refundable after your order released. The freight is chargeable. About 3 days after receiving the payment, we will send it out.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as .
Q: What's your delivery way?
A: Express delivery, sea shipping are available for your request.
Q: Can we visit factory?
A: Yes any time. Our address is : No. 7136, Airport Road, Jinan High-tech Zone, Shandong Province.
Notice : Please note that the price on platform is a rough price.The actual price will depends on raw materials, exchange rate, wage and your order quantity. Hope to cooperation with you, Thanks !
Spray paint classification according to material volume density divided into light spray paint, heavy spray paint and heavy spray creep.Light spray coating is used as heat preservation and heat insulation lining, medium and heavy spray coating can be used as heat insulation lining, and heavy spray coating is mainly used as working lining.Spray coatings have become one of the most important amorphous refractory materials used in many industrial furnaces lining.It can be used to build and repair furnace lining and coating into a protective layer under cold state, but also suitable for repair furnace lining under hot state.
| Model | C.C % | M.S.T ºC | BD g/cm3 | Max diameter mm | CCS MPa | Elastic coefficient MPa ×103 | Wear resistance (cm3/min) | |
| Al2O3+ SiC +TiO2 | SiO2 | |||||||
| RS35 | - | ≥60 | 350 | ≥2.40 | 5 | ≥160 | 60 | 0.12 |
| RA60 | ≥60 | - | 600 | ≥2.80 | 3 | ≥150 | 60 | 0.15 |
| RA90 | ≥65 | - | 800 | ≥2.85 | 3 | ≥140 | 60 | 0.20 |
| RA120 | ≥70 | - | 1200 | ≥2.90 | 3 | ≥130 | 60 | 0.33 |
Performance
Good toughness and wear resistance: adopt without directional mesh, coupling technique, enhance the fracture toughness, effective due to the impact caused by the breakage and spalling.;
High mechanical strength: effective against material impact and shear stress, combining with the system adopt composite strengthening measures and special processing, chemical combination, strength high formation;
Integrity is strong: can finnly adhesion in equipment and piping, no crack, not to drop quickly;
Environmental compatibility good: adopted acid and alkali resistance of synthetic inert materials and won't react to the environment slag sensitivity.
Using Position
Used in cement, steel, thermal power, petrochemical, and other industries strongly flush, strong corrosive materials, severe wear parts.
Company introduction
Shandong Luming new materials Co., Ltd. was founded in 2005, is a manufacturer of amorphous refractory castables, non shrinkage grouting materials and high temperature pre products.
The company has two full-automatic production lines, the introduction of a complete set of advanced testing equipment, the establishment of a sound testing process, to ensure that customers with high-quality products and services.
The company has passed ISO9001 international quality management system certification, ISO14001 environmental management system certification and intellectual property management system certification, and has passed the field inspection and obtained the certificate. The company has several independent national intellectual property rights and is recognized as a high-tech enterprise.
You can discuss your purchase requirements with our customer service center, whether you are choosing the current product from our catalog or seeking engineering assistance for your application.
The company has two full-automatic production lines, the introduction of a complete set of advanced testing equipment, the establishment of a sound testing process, to ensure that customers with high-quality products and services.
The company has passed ISO9001 international quality management system certification, ISO14001 environmental management system certification and intellectual property management system certification, and has passed the field inspection and obtained the certificate. The company has several independent national intellectual property rights and is recognized as a high-tech enterprise.
You can discuss your purchase requirements with our customer service center, whether you are choosing the current product from our catalog or seeking engineering assistance for your application.
The company has no shrinkage grouting material production line and refractory material production line, the introduction of a complete set of advanced testing equipment, the establishment of a sound testing process, to ensure that customers to provide high-quality products and services.
Q: Are you a factory or a trading company?
A: We are manufacturer.
Q: What's the MOQ?
A: Our MOQ is 10 Tons.
Q: How long is your delivery time?
A: Delivery time depending on your purchasing quantity and production season.
Q: Can i get free sample?And how long will it take?
A: Samples charge is according to actual cost, and it is refundable after your order released. The freight is chargeable. About 3 days after receiving the payment, we will send it out.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as .
Q: What's your delivery way?
A: Express delivery, sea shipping are available for your request.
Q: Can we visit factory?
A: Yes any time. Our address is : No. 7136, Airport Road, Jinan High-tech Zone, Shandong Province.
Notice : Please note that the price on platform is a rough price.The actual price will depends on raw materials, exchange rate, wage and your order quantity. Hope to cooperation with you, Thanks !
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier