Modified Starch Production Line

China Modified Starch Production Line, Find details about China Modified Starch, Horizontal from Modified Starch Production Line

Model NO.
WLDH-20
Rhythm
Non Flow Production Line
Production Scope
Product Line
After-sales Service
Online Technical Service / on-Site Technical Servi
Trademark
CL
Transport Package
Wooden Package Suitable for Ocean Freight
Specification
Total drum volume 20 CBM
Origin
China
HS Code
8474390000
Model NO.
WLDH-20
Rhythm
Non Flow Production Line
Production Scope
Product Line
After-sales Service
Online Technical Service / on-Site Technical Servi
Trademark
CL
Transport Package
Wooden Package Suitable for Ocean Freight
Specification
Total drum volume 20 CBM
Origin
China
HS Code
8474390000
        
              
               
Modified Starch production line plan (Dry method)
 Horizontal Ribbon Mixer
  
Production capacity: 15000-20000tons/year
Reaction time: 4 hours
Reaction temperature: 60-80ºC
Based on the above data, the annual production of 300 days, the daily production of four batches, each batch of 12-15 tons of production, the recommended production line for the 20 cubic meters of snail-type heating dry reactor & air cooling conveyor , 2 sets.

Working principle and characteristics
 1, The model is a horizontal cylinder, single-axis double-layer spiral symmetrical distribution structure. Mixer tube U-shaped, with a heating jacket, in the roof with a feed port, according to the user needs can be installed on the spray liquid device. The cylinder is equipped with a single shaft rotor, the rotor is composed of shaft, support rod and ribbon. Spiral points inside and outside the double layer, the opposite direction. The bottom of the cylinder is equipped with a discharge device.
 Working theory                              
In the motor drive, the mixer rotor to rotate in the direction of rotation in the process, the ribbon on the one hand the material pushed along the axial movement, on the one hand the material from the top of the tape to the top, The material is always moving to the middle of the cylinder, the inner layer of the material is from the middle to the two ends of the movement, so that the material in the movement of the formation of two circulating streams, in the process of repeated circulation, the material will be fully mixed .

Equipment selection
  1,Host: WLDH-20 type ribbon mixer
            Total volume of 20m ³, the effective volume of 12m ³
            Material: cylinder SUS304 / 8mm, within the reinforced tube Ф89 × 6mmSUS304, jacket 8mm Q235B / 12mm, insulation 50mm aluminum silicate, external seal Q235B / 2mm, wall panels Q235B / 18mm, posted SUS304 / 3mm,
         a,Spindle Ф273x20 Seamless Steel Tube, Outsourcing Stainless Steel SUS304. In the filler end phase stainless steel, stuffing box and gland SUS304       
         b,The ribbon is SUS304 / 14mm           
         c,Cover with SUS304 / 4mm
2,Drive motor & power: Y250M-4-55kw
        Reducer: ZSY280-71
      Heating method     
  a. Steam, supplied by the user;
  b. Heating oil, provide two sets of 2m³ heat oil tank and the corresponding pump and control system;
  c. Electromagnetic heating plate heating

 Major configuration details of WLDH-20 type ribbon mixer
 No.NameSpecifications and modelsQuantityMaterialsManufacturer
1Host upper box CoverWLDH-201 setSUS304/4mmOur factory
 
Manhole¢4501 setSUS304
InletSupporting 2 setSUS304
FlangeSupporting1 set304/18mm
2Host lower boxLower boxWLDH-201 setSUS304/8mm
Strengthen support pipe¢89x61 setSUS304/6mm
Jacket layerWLDH-201 setQ235B/8mm
InsulationWLDH-201 set50mm Aluminum silicate
Outer sealingWLDH-201 setQ235B /2mm
Flange Supporting1 setSUS 304/18mm
Front/back coverWLDH-201 setQ235B/18mm
SUS304/3mm
Bottom coverSupporting1 setQ235B/18mm
SUS304/3mm
Outlet250*350 cylinder valve1 setSUS304 
3Host bracket supporting1 setQ235B/18mm
4Driving partsDrive spindle Φ273X201 setSUS304 Module
Stirring teethΦ89X61 setSUS304/8mm
Ribbon supporting 1 setSUS304/14mm
Bearing seatSD31442 sets Module Purchase
Roller bearings23144C/W332 sets ModuleHaerbin bearing 
Sealing 20×202 setscarbon fiberPurchase
Driving motorY250M-4-55kw1 setNational standard Jiangyin Dazhong
Reducer ZSY280-711 set National standardChangzhou Guomao
Small pulleyФ2001 set No.45 steelOutreach processing
Big pulleyФ3001 setNo.45 steelOutreach processing
Outside the rack 1 set1.5mm 304 red hot holeOur factory
CouplingGL81 setNational standardPurchase
5 Heating Steam  By user
5-1HeatingHeating oil system 2*2m³ heat oil tank and the corresponding pump and control system;Our factory
5-2HeatingElectromagnetic heating plate heating 45kwOur factory
6Hopper 1 setSUS304/2mm  Our factory
7 
Off wind device
 1 setSUS304 Purchase
8Bolts and nutseach size1 set 
Q235 Module
 Purchase
9Sealing  each size1 set ModulePurchase
10Control systemZhengtai1 set ModulePurchase 
 Equipment technical parameters
  Model: WLDH-20
  Total volume: 20, the effective volume: 12;
  Host rotating speed: ~12rpm
 Air delivery (cooling) system
No.NameSpecifications and modelsQuantity Material manufacturer
1CycloneLT-7501 setSUS304/3mmOur factory 
 
2Pulse bag filterMC-961 setSUS304/3mm
3Induced draft fan22KW1 set Purchase
4Delivery pipe 1 setSUS304/2mmOur factory
5Silencer  1 setSUS304/2mm

Native starch lift device
a. Climbing belt conveyor
    Driving power: 3kw
    The width of the belt conveyor is 1 m, the length and lift height will be confirmed by design
b. Vertical lifting device
    Simple industrial elevator, the maximum lifting weight not more than 3 tons, the lifting height will be confirmed according to the final design;
 Quality and after - sales service
     1.The normal use of the equipment shelf life of 3 years (except for human factors).
     2.In the warranty period, such as the emergence of quality problems, suppliers within 96 hours to reach the
      demand side of the scene.
     3.The Company solemnly promise: the equipment file life-long tracking service (spare parts will be free in 3
      years).