Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

China Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators, Find details about China Heat Recovery Unit, Heat Recovery Unit Core from Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

Model NO.
HBS-ZF300/300-500-4
Heat Recovery Type
Sensible
Maintain
Water Wash
Core Spacing
4-12mm
Max Tep.
90 Degree
Max Section Length
500mm
Heat Recovery Efficiency
70-75%
Trademark
HOLTOP
Transport Package
Wood Cases,
Specification
ISO9001-2008, ISO14001, OHSAS18001
Origin
Beijing, China
HS Code
8415909000
Model NO.
HBS-ZF300/300-500-4
Heat Recovery Type
Sensible
Maintain
Water Wash
Core Spacing
4-12mm
Max Tep.
90 Degree
Max Section Length
500mm
Heat Recovery Efficiency
70-75%
Trademark
HOLTOP
Transport Package
Wood Cases,
Specification
ISO9001-2008, ISO14001, OHSAS18001
Origin
Beijing, China
HS Code
8415909000
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators
Total heat enthaply air to air crossflow heat exchanger for energy recovery ventilator

Total heat exchanger is made of ER paper which is featured by high moisture permeability, good air tightness, excellent tear resistance, and aging resistance. The clearance between the fibers is very small, so only the moisture molecules of small diameter can go through, the odor molecules of larger diameter are unable to pass through it. By this means, the temperature and humidity can be recovered smoothly, and prevent the pollutants infiltrating to the fresh air.
 

Main Feature:

Heat recovery efficiency up to 85%
Enthalpy efficiency up to 76%
Effective air exchange rate over 98%
Selective molecule permeability
Flame retardant and mildew resistance

Working principle

The flat plates and the corrugated plates form channels for fresh or exhaust air stream. When the two air steams
passing through the exchanger crossly with temperature difference, the energy is recovered.


Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators
Performance index
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

E.R. paper performance introduction

 

Heat exchange paper: for heat and moisture exchange, the main performance standards are diathermancy, moisturepenetrability and air permeability.

Corrugated paper: to construct the frame for the heat exchanger, flowing passages of the air stream.



Anti-bacteria and mold prevent performance

The bacteria exists in the damp air, when air goes through the heat exchanger, bacteria may stick on the walls of the
exchanger. If the heat exchanger doesn't have the anti-bacteria ability, it will grow on the inside wall, and then
blown into indoor, which will cause indoor air pollution. That is why the anti-bacteria performance is required. The
ability of bacterial growth inhibition and killing bacteria, to prevent the production of mold, is an important factor of
heat exchanger paper.
By adding the bactericides to the surface of paper and the anti-bacteria agents to the slurry, the heat exchanger has
abilities to kill bacteria (such as Escherichia coli and staphylococcus) and inhibit fungal (such as Candida albicans)
and prevent the bacteria and germ spreading in the air. Holtop heat exchanger paper was tested by Guangzhou Industry Microbe Test Center, and shown the antibacterial effect, and its mildew grade is 0.

 

Product Specification 

 

The heat exchange paper and corrugated paper are adhesived with waterborne binder, the core and cover are sealed with special sealant to total separate the supply air and exhaust air, in order to keep the structure strength and air tightness and prevent the cross contamination. It is widely applied and the maximum temperature should not exceed 100 C.
For size A within 500mm and the size L within 600mm, the heat exchanger is built in one module. For size A bigger
than 500mm and size L bigger than 600mm, the heat exchanger is built in multi-modules.

 

 

Model

A (mm)

B (mm)

C (mm)

Optional corrugation height (mm)

Remarks

HBT-W168/168

168

≤500

240

2.0, 2.5

One module

HBT -W202/202

202

≤500

288

2.0, 2.5

HBT -W222/222

222

≤500

317

2.0, 2.5

HBT-W250/250

250

≤700

356

2.0, 2.5, 3.5

HBT-W300/300

300

≤700

427

2.0, 2.5, 3.5

HBT -W350/350

350

≤700

498

2.5, 3.5

HBT -W372/372

372

≤700

529

2.5, 3.5

HBT -W400/400

400

≤700

568

2.5, 3.5

HBT -W472/472

472

≤550

670

3.5

HBT -W500/500

500

≤550

710

3.5

HBT -W552/552

552

≤550

783

3.5

HBT -W600/600

600

≤550

851

3.5

HBT -W652/652

652

≤550

925

3.5

HBT -W700/700

700

≤550

993

3.5

Multi-module combined

HBT -W800/800

800

≤550

1134

3.5

HBT-W1000/1000

1000

≤450

1417

3.5

HBT-W1200/1200

1200

≤450

1702

3.5

HBT -W1400/1400

1400

≤450

1985

3.5

HBT -W1600/1600

1600

≤450

2265

3.5


Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

Applications

-Direct air to air energy exchange

-Ideal for both residential and commercial application

- Suitable for airflow 300-60000 m3/h.

Holtop Factory
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

Holtop is one of the best manufacturer in ERV/HRV, heat exchanger and AHU area in China, founded in 2002, areas covered more than 30,000 square meters, turnover of 2012 is 42 million dollars, we have enthalpy testing lab. for products test. As a leader in energy/heat recovery equipments, we cooperate with more than 30 famous companies who located in Europe, the Middle east, Korea, Southeast Asia, Taiwan, etc. supplied equipment to Beijing Olympic and Shanghai Expo 2010, works together with domestic and international brands like Midea, Haier, Hitachi, etc.
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

Holtop partner

Holtop cooperate with world famous brand or offer OEM service including Hitachi, LG, McQuay, TRANE, Systemair, Aldes, York, Haier, Gree, MHI Group, Midea, Carrier, Dunham-Bush, etc.
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators

Holtop products stand for TOP quality in heat recovery ventilation filed in China, certificated by CE, Eurovent, ISO and other different approved tests like anti-flaming test, anti-mold test, energy saving product test. Etc.
Hrv Heat Exchanger Core with Hygroscopic Plate Energy Recovery Cube Recuperators