This is a multifunctional display stand that can display a dress, T-shirt, pants, underwear, bathing suit, scarf, and others.

You can use it in stores as a display stand and use it at home as storage.

1. Type: acrylic plate header, metal plate header, or cardboard plate header can be selected.

1) Acrylic header: silk screen printing, UV printing or mounting are recommended

2) Metal header: it is suggested to use silk screen printing, UV printing or mounting

3) Cardboard header: four-color printing or UV printing is recommended

2. Shape: round, rectangular, square, or other specific shapes can be selected as required.

3. Fixing method: easy to fix with screws. After removing the screw, it is free to change different plates.

1. The number of floors: the original design of the metal shoe display rack has 4 floors, which can be increased or decreased according to actual needs. For the sake of aesthetics, it is recommended to have no more than 6 floors and no less than 3 floors.

2. Size: the original length of each tray is 20mm, and it can be selected between 20mm - 30mm. 20mm for 34-39 Europe size, 25mm for 40-43 Europe size, and 30mm for 44-46 European size.

3. Anti-skid design: the front end of the tray has a baffle design to prevent the shoes from slipping. Baffle conventional height can choose 20mm, 25mm, or 30mm can also be customized according to the type of shoes.

4. "Windmill" shape design: the windmill shape design with random patterns is distinctive. It can be changed to other shapes according to customers' preferences.

5. Rotary design: depending on the gap between the tube and tube rotation, no bearing.

1. The number of supporting feet: our company adopts 4 feet to stabilize the whole exhibition frame or 5 feet.

2. The shape of supporting feet:

1) Iron square pipe: our company adopts a 25mm*25mm iron square pipe as the support foot, and can choose 30mm*30mm, 35mm*35mm, 40mm*40mm, and other conventional sizes.

2) Iron round pipe: at the same time, the iron round pipe with a diameter between 25mm and 40mm can also be used as a supporting foot.

3. Pipe sealing: there are two ways to maintain the aesthetics of supporting feet.

1) Rubber plug: the commonly used plastic rubber plug of the corresponding size is used to seal the pipe mouth, which is easy and convenient at low cost.

2) Welding metal sheet: weld the iron sheet of the corresponding size to seal the pipe mouth. After welding, it needs to be polished, and the cost is a little higher than that of the rubber plug.

1. Caster:

1) Un-brake caster: it is easy to move, but can only be used on flat ground.

2) Brake caster: it is easy to move and can be used on the flat or slightly tilted ground. (adopted by our company) 

2. Adjusting foot: it can be used on uneven ground, adjust the height of the foot according to the actual situation of the ground, and maintain the balance of the display frame.