Introduction:

scientify design: We pay attention to the practicality. The latested power supply cabinet have been the Five-gereration. They have been designed to be more easy to operate and more convenient to mainte.

==Main Models And Technical Parameters==

Equipment Type (Furnace capacity)	Power input (three-phase four-wire 50/60HZ)				Power Output				Melting time   (Minutes)	Electricity consumption per ton of material (KW)
	Equipment power (kw)	Incoming line voltage (V)	Into the line current (A)	Matching transformer	DC current (A)	DC voltage (V)	IF voltage (V)	IF frequency (Khz)		Steel	Copper	Aluminum
GW--0.05T	50	380	80	50	100	500	750	1	20-40	750	510	650
GW--0.1T	100	380	160	100	200	500	750	1	20-40	700	510	640
GW--0.15T	160	380	256	200	320	500	750	1	20-40	650	500	630
GW--0.25T	200	380	320	250	400	500	750	1	20-45	650	500	610
GW--0.35T	250	380	400	315	500	500	750	1	20-45	650	490	600
GW--0.5T	350	380	560	400	700	500	750	0.8	30-50	630	480	570
GW--0.75T	500	380	800	630	1000	500	750	0.8	40-50	620	470	560
GW--1T	800	380	1280	1000	1600	500	750	0.7	40-50	620	460	550
		750	656	1000	808	990	1480
GW--1.5T	1000	380	800	1250	1000	500	750	0.7	40-60	600	450	540
		750	820	1250	1010	990	1480
GW--2T	1400	750	1148	1800	1414	990	1480	0.5	45-60	600	440	530
		750	574	1800	707	990	1480
GW--3T	2000	750	820	2500	1010	990	1480	0.5	50-70	580	430	520
GW--5T	3000	950	1140	4000	1190	1260	1900	0.3	50-80	570	420	510
GW--10T	6000	950	2280	8000	2380	1260	1900	0.3	50-90	560	410	490
GW--15T	8000	950	1520	10000	1590	1260	1900	0.3	50-90	550	400	480
GW--20T	10000	950	1900	12500	1980	1260	1900	0.25	50-90	530	400	470
GW--30T	15000	950	2850	20000	2980	1260	1900	0.25	50-90	520	400	450

Welcome to check our factory online!

 

Sucessful cases 

 

Technical Support

1) Equipment design
Furnace will be customized to meet your production needing and environmental condition (maximum ambient temperate, humidity, altitude,etc) .

2) Drawings delivery
Technical drawing will be send to the buyer after geting the deposite, so the buyer can build basic contruction before the furnace arrived.

3) Acceptance check before delivery
a. The supply of the inspection equipment complies with the scope of supply and technical specifications in the technical agreement.
b. Check the mechanical actions of the equipment.
c. Safety interlock of equipment and alarm function test.

4) Installation & debugging & worker training
a. Cooperate with guidance to check the buyer installation work;
b. Internal and electrical wiring connections between equipment;
c. Site commissioning;, according to the actual equipment adjust to the best state;
d. Direct buyer operating personnel to the correct use of operating equipment;
e. Guidance on site security considerations;
f. To guide the buyer maintenance personnel troubleshooting methods;
g. Provide equipment specification;