Ball valve Stainless steel 304/316 DN8 10 15 20 25 32 40 50 65 80 one piece/two piece/three pieces internal thread Plumbing water pipe bathroom fitting Valve
China Ball valve Stainless steel 304/316 DN8 10 15 20 25 32 40 50 65 80 one piece/two piece/three pieces internal thread Plumbing water pipe bathroom fitting Valve, Find details about China Check Valve, Angle Control Valve from Ball valve Stainless steel 304/316 DN8 10 15 20 25 32 40 50 65 80 one piece/two piece/three pieces internal thread Plumbing water pipe bathroom fitting Valve
We use the very best quality raw materials from certified suppliers on the market to manufacture these products
--- 1 Piece Ball Valve 304/316 ---
We use the very best quality raw materials from certified suppliers on the market to manufacture these products
--- Advantages of Stainless Steel Casting ---
- Sizes: 1/8" to 4"
- Weights: a few grams to more than 50 pounds
- Surface: very smooth finish
- Tight tolerances
- Reliable process controls and repeatability
- Design and casting versatility
- Efficient production
- Affordable tooling
- Material variety
--- Function Description ---
The 1 piece ball valve has one body part making it a robust and cost-effective option
The One Piece Ball Valve has a standard port which is also called a reduced port since the ID of the valve is one size smaller than the ID of the pipe size it attaches to. These One Piece Valves are easy to use and the best priced Stainless Ball Valves on the market.
A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, the flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and the flow is blocked.
***
| Uses | Commonly used in standard applications where a study valve is required and a reduced flow is not important to the application. |
| Advantages | A One-piece ball valve is known for its low cost and Robust design. |
| Low chance of leaking, since there are not body joints. | |
| Thread | Typical for threaded ball valves, the 1 piece comes with female NPT threads on both ports. |
| Pressure Rating | Pressure rated at 1000 PSI WOG (Water, Oil, Gas). |
| Port | Designed with a reduced port, also known as a standard port. |
| Material | Our 1-piece valves are made with quality grade 304/316 stainless steel. |
| Designs | 1. As per the customer's drawings |
| 2. As per the customer's samples | |
| Surface treatment | 1. Plug draw (PD) |
| 2. Mechanically polished (MP) | |
| 3. Buffed polished (BP) | |
| 4. Pickled & Passivated / Chemically polished ( AP & CP) | |
| 5. Bright Annealing (BA) | |
| 6. Anodical cleaning (AC) | |
| Service | OEM service available |
| Products | All kinds of stainless steel casting: include pipe fittings, ball valves, automotive parts |
| Application | Machinery Manufacturing, Pumps, Valves, Energy, Mining, Rail, Marine, Hydraulic, Automotive, Oil & Gas, Medical, Generial OEM'S |
| pump body, valve parts, architectural parts and furniture parts so on | |
| Advantage | 1. With 5 years in stainless steel casting; |
| 2. Near Tianjin Port and Air Port (Convenient Transportation) | |
| 3. We provide: OEM stainless steel lost wax castings and OEM machining services for stainless steel lost wax castings | |
| 4. We have: CNC Machining, CNC turning, CNC Milling, 3D CMM Inspection and CNC Optical Inspection. | |
| 5. We believe: On time, Stable quality, Justice price, Client confidentiality. | |
| 6. With samples and order: We can offer dimension report, material certification. | |
| Inspection | 1. Dimension report |
| 2. Material certification | |
| Packing | Export carton and fumigation wooden pall. |
| Sample | Offer free samples and freight collected. |
| OEM and ODM | Accepted and professional. Buyer's drawing or designs are available. |
| Material test report | It is available upon request when placing order. |
--- Application ---
--- Quality Control ---
1) Checking the raw material after they reach our factory------- Incoming quality control (IQC)
2) Checking the details before the production line operated
3) Have a full inspection and routing inspection during mass production---In-process quality control (IPQC)
4) Checking the goods after they are finished---- Final quality control (FQC)
5) Checking the goods after they are finished-----Outgoing quality control (OQC)
* Our wax casting product processed by 79 steps with high standard and 100% inspection. Along with the power of our advanced machine, quality is something you do not need to worry about.
--- Ball Valve ---
| Configuration | Description |
| One-piece | One-piece ball valves are installed as a unit. The retainer holds the ball and seal. Compression of the seal is controlled by increasing or decreasing the tightness of the threading holding the retainer. A one-piece ball valve must balance the integrity of the seal against the friction between the ball and seal. If the retainer fails to secure the entire seal, the pipe forces will be uneven and the seal will wear unevenly. |
| Two-piece | Two-piece ball valves allow for easier assembly. The body is split into two pieces and the configuration uses a floating ball. The two body pieces are combined with a flange and bolts. This design makes servicing the valve easy and the procedure can be done in-line. The disadvantage of a two-piece valve design is the seal tightness can be altered by the system force and temperature, creating a potential leak path at the joint. |
| Three-piece | Three-piece ball valves offer easy and fast access for valve maintenance. The three-body connector can be removed and the fourth can be loosened to allow the body to swing away to carry out installation or maintenance. |
--- Pipe Fitting ---
| 1 | Elbow | 45°Elbow | 90°Elbow |
| 2 | Returns | Long Radius Returns | Short Radius Returns |
| 3 | Tees | Equal Tee | Reducing Tee |
| 4 | Cross | Equal Cross | Reducing Cross |
| 5 | Reducers | Concentric Reducer | Eccentric Reducer |
| 6 | Stubends | Long Stubend | Short Stubend |
| 7 | Couplings | Full/Half Coupling | Reducing Coupling |
| 8 | Swage Nipple | Concentric Swage Nipple | Eccentric Swage Nipple |
| 9 | Caps | Union | Plug |
| 10 | Bushing | Lock nut | Sweepolet |
| ... | |||
--- Impeller ---
The types of pump impeller we can offer you:
1. Open impeller
2. Semi-open impeller
3. Closed impeller
4. Vortex impeller
5. Cutter impeller
...
--- OEM Fitting ---
* The products shown here is only to present the scope of our business activities. We can manufacture no standard parts according to your drawing or sample.
Hebei Junya Precision Machinery Co., Ltd
is a high-tech enterprise that combines designing, tooling developing, casting, machining, surface treatment, inspection, sales, and service altogether. Founded in 2017, located in Huanghua, Hebei, Junya now covers an area of more than 5000 square meters.
With a massive research & development environment, Junya utilized market-leading technology and introduced various advanced equipment to ensure stringent quality in production.
Under a powerful management team, the company has grown to a group with more than 100 employees. Product offerings range from Stainless Steel Pipe Fitting, Quick Joint, Ball Valve, Check Valve, to Marine Hardware and Auto Parts. The material are 304, 304L, 316, 316L, SF8M, WCB, 1.4408, etc.
- Quality - Creativity - Consistency -
These words are JY's slogan, and also a philosophy that drives the company to offer the superior service you are looking for…
Q1: How long is your delivery time?
A: The delivery time depends on the total quantity of the order. Usually, samples can be delivered within 15 days.
Q2: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples for free, and we can also pay for the model, but the customer has to pay for the shipping cost.
Q3: What is the minimum order quantity for your products?
A: It depends on the category or order.
Q4: Where is your factory?
A: Our factory is located in Hebei Province, close to Tianjin Seaport.
Q5: What quotation does your company need to submit?
A: Drawings or samples, and related information, such as quantity, weight, and materials.
Q6: What if we don't have drawings?
A: We can duplicate your samples and make drawings for your confirmation.
You Might Also Like
All Kinds of Chassis Compatible 37m Concrete Pump Truck in H......
China Factory Price Aluminum Traffic Sign Board for Export
Shenzhen Whosale Korea Mobile Phone S4 I9505
China Farm Machinery Disc Harrow Tractor Attachments Cultiva......
Luen 2021 13000* 2550 *1650 Skeleton Container Semi Trailer ......
BSPT DN15 1000wog SS316 2PC Ball Valve DIN SS304
RC3/4' Precision Compressed Air Filter for Refrigerate A......
Power Line Accessories NLL Series Aerial Strain Clamp with 2......
All Color Ink! ! Pigment Ink for Epson Printer
Custom Size Thickness Aluminum Foil Tape Duct Insulation Tap......