Profile

Automatic plate pulling filter press is controlled by hydraulic system, electric control components are all adopted famous brand products, realize manual control and full computer automatic control.
The hydraulic device is used as the power mechanism for pressing and loosening the filter plate, and the electric contact pressure gauge is used to realize actions such as pressure keeping, compression, return, and plate pulling, etc. can be achieved automatically. Electrical parts are equipped with a variety of safety devices to ensure the safety of operators and the normal operation of the filter presses.

The compression filter press consists of membrane plates (the membrane plate is composed of two polypropylene membranes and a high strength polypropylene core plate with heat capacity) and van filter plates arranged together to form filter chambers. Under the pressure of the feed pump, the slurry is input into the filter chamber. The solid in the slurry is separated from the liquid by the filter cloth. When the solids in the slurry forms a cake, the air is put into the diaphragm, and the solid in the filter chamber is fully pressed. Reduce moisture content. The machine has its unique characteristics especially for the filter of viscous material and users with higher water content requirements.
 


Features

Adopt low start variable frequency reducer to pull the plate automatically, PLC program control, save time and effort, simple operation and stable performance.

 

Working Principle Of Chamber Filter Press:

1.  Slurry is pumped into the filter press. The solids are distributed evenly on the filter cloths during the feed (fill) cycle.
2.  Solids begin to build on the filter cloth, trapping the ensuing particles and building a filter cake. The filter cake acts as a depth filter for solid/liquid separation. Filtrate exits the plates through the corner ports into the manifold.
3.  When the correct valves in the manifold are open, the filtrate exits the press through the filtrate outlet. As the filter press feed pump builds pressure, the solids build within the chambers until they are completely full of filter cake.
4.  Once the chambers are full, the fill cycle is complete and the filter press is ready to be emptied.


Technical Parameter