Strong Adhesive Fast Dry Epoxy for Metal/ Electronic Components
China Strong Adhesive Fast Dry Epoxy for Metal/ Electronic Components, Find details about China Fast Dry Epoxy, Fast Dry Glue from Strong Adhesive Fast Dry Epoxy for Metal/ Electronic Components
Basic Info.
Model NO.
650AB
Main Agent Composition
Thermosetting Resin
Characteristic
Fast Dry, Strong Adhesive
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Shelf Life
6 Months
Mixing Ratio
1:1
Curing Time
5mins
Trademark
Jinhua glue
Transport Package
10kgs/Set
Specification
SGS, ROHS, STC
Origin
China
HS Code
3506912000
Model NO.
650AB
Main Agent Composition
Thermosetting Resin
Characteristic
Fast Dry, Strong Adhesive
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Shelf Life
6 Months
Mixing Ratio
1:1
Curing Time
5mins
Trademark
Jinhua glue
Transport Package
10kgs/Set
Specification
SGS, ROHS, STC
Origin
China
HS Code
3506912000
Product Desciption
Feature
Epoxy resin adhesive 650AB can be cured under normal temperature and high temperature, easy to operate, with super fast curing, high bonding strength.
Application
650AB can be widely used for adhesion for hard materials such as metal, stone, electronic components, wood, etc..
Detailed information
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Below is some factory photo for your reference.
Free samples are available! Please contact us for more details and tell us what you need!
Epoxy resin adhesive 650AB can be cured under normal temperature and high temperature, easy to operate, with super fast curing, high bonding strength.
Application
650AB can be widely used for adhesion for hard materials such as metal, stone, electronic components, wood, etc..
Detailed information
| Model 650AB | Main agent 650A | Curing agent 650B |
| Properties before Hardening | ||
| Color | Colorless transparent | Colorless transparent |
| Specific gravity | 1.15 | 1.05 |
| Viscosity(25ºC) | 8000-12000CPS | 5500-8500 CPS |
| Conditions of Usage | ||
| Mixing ratio | A: B = 100:100(weight ratio)>1:1 | |
| Hardening conditions | 25 ºC×5Min (2 g) | |
| Usable time | 25ºC×2min (100g) | |
| Properties after Hardening | ||
| Hardness, shore D | <85 | |
| Withstand voltage, KV/mm | 22 | |
| Flexural strength, Kg/mm2 | 27 | |
| Volume resistivity, Ohm3 | 1x1015 | |
| Surface resistance, Ohmm2 | 5X1015 | |
| Thermal conductivity, W/M.K | 0.56 | |
| Moisture absorption, % | <0.15 | |
| Induced electric loss, 1KHZ | 0.42 | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Below is some factory photo for your reference.
Free samples are available! Please contact us for more details and tell us what you need!
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......