Shelving panel forming machine

MACHINE COMPOSITIONS:

5TonX650mm Hydraulic un-coiler

Hydraulic system to expand coil inner hole;Pump motor:5.5KW;

Frequency Inverter to regulate turn speed;Motor:3KW

Coil Inner-diameter= 470-560mm. Coil Outer-diameter Max. 1600mm;

Link-connect expanding system

Load Capacity: Max. 5 Tons; Coil Width Max. 650mm;

Hydraulic Holder on the top to hold the sheet, keep press all the working time, special design on the hydraulic group

Pre-leveling device

Powered Feeding rollers with guide section

Retarding motor driving,motor power: 3KW

Gear/Sprocket driving

7 leveling shafts with 4 over 3

Hydraulic Pre-Notching and Pre-punching device

Powered Feeding rollers with guide section,

Separated driven motor to feed in the sheet into the punching unit

Servo motor driving, power: 3KW

Auto control angle notching & punching round hole & ellipse holes

Hydraulic system of oil pump motor:18.5KW (To be double checked)

Cold Rolling Mills

Feeding section with guide device

Gear/Sprocket driving; 16-step to form

Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated

The Tooling is configured using pre-machined Spacers, which are designed to allow for different width of panel to be formed.

Shafts Diameter=75mm, Precision Machined

Main motor =5.5 KW, Frequency speed control

Cutting& curving device

Stop to cut, stop to bend-edge

Cutting tool material: Cr12, Heat treatment;

Hydraulic system of oil pump motor:7.5KW

Total eight sets of combined tooling for standard type (4 widths)

PLC Control System

Control the quantity, punching length & cutting length automatically;

Combined with: PLC, Touch Screen(SIEMENS), Inverter(Schneider), Encoder (Omron), etc

CLOSED LOOP CONTROL SYSTEM

Cut-to-length tolerance≤± 0.5 mm

Control voltage 24V

Product Rack Un-powered, 1 unit Only for one fixed length