Amada Trumpf tool grinding machine, turret punch tool grinding machine, turret punch tool sharpening machine for grinding tools in CNC turret punch press.

Turret Punch Press Tool Grinding Machine, punch tool grinding machine, tool grinding machine, tool sharpening machine



It is suitable for grinding & sharpening any kind of punch tools used in CNC turret punch press.

I Description of the machine

This machine is specially designed and produced for grinding tools used in CNC turret punch press. Max. Grinding diameter is 300mm and the rotating worktable is inclinable to be 0-10 degree which is for grinding rooftop tools.

The dual-alleyway water cooling system and high-grade grinding wheel prevent tools from burning and so raise the life of tools.

Both top and bottom tools can be grinded by this spcial machine.

II Features comparing to surface grinding machine:

Convenient and fast fixing tools into the machine. Since the top punching tools are long and they are not easy to be fixed on the surface grinding machine

Small occupying area: Can be closed to the turret punching machine. If you dont have spare tools, this is most important.

Axis of grinding wheel is designed to be same to that of the working face. So the grinding result is of high precision.

Grinding measure can be preset and automatically controlled

Special grinding wheel with big pores, long life & more smooth & clean grinding results

III Structure

This machine is comprised of grinding wheel frame, grinding measure adjusting mechanism, feeding mechanism, three jaw self centering holding chuck, motor and cooling system.

The grinding measure adjusting mechanism can make gring wheel frame move up and down; The wheel frame can be swung towards to the grinding measure adjusting mechanism; The wheel frame rotates alongside the holding chuck and grinds the tools.

The rotate worktable is mounted with three jaw chuck or permanent magentic chuck suitable for various top and bottom tools. The quick-locking-device can achieve interchange between three-jaw chuck and magnetic chuck within few seconds.

NC control: The grinding measure, quick grinding speed, slow grinding speed, non-feeding grinding time, etc., can be preset on the touch screen. The minimum stroke setting is 0.001mm. The slowest feeding speed is 0.015mm/s.

Machine dimension: 1000 x 1000 x 1200mm

Machine weight: About 500kg