PP Water Filter Cartridge

China PP Water Filter Cartridge, Find details about China Filter Cartridge, PP Filter Cartridge from PP Water Filter Cartridge

Basic Info.

Model NO.

PP-40

Name

Melt-Blown Filter Cartridges

Filter Media

Polypropylene

Nominal Length

10′′, 20′′, 30′′, 40′′

Micron Rating

1, 5, 10, 25, 50, 75, 100 μm

End Cap

DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin

Operating Conditions

3.0 Bar at 21ºC, 2.0 Bar at 40ºC

Applications

Plating Solutions, Pre RO/Di, Chemicals, Petrochem

Outer Diameter

69mm

Normal Operating Temperature

up to 65 ºC

Filtration Area

0.65m2 Per 10 ′′

Max.Operating Temperature

90ordm;Catp≤1.0 Bar

Forward Flow Direction

4.2 Bar at 25 Ordm;C

Reverse Flow Direction

2.1 Bar at 25 ºC

pH Value Compatibility

1-14

Extractables

0.03G/10′′

Trademark

FROTEC

Transport Package

Carton

Specification

10′′

Origin

China

HS Code

8421999090

Model NO.

PP-40

Name

Melt-Blown Filter Cartridges

Filter Media

Polypropylene

Nominal Length

10′′, 20′′, 30′′, 40′′

Micron Rating

1, 5, 10, 25, 50, 75, 100 μm

End Cap

DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin

Operating Conditions

3.0 Bar at 21ºC, 2.0 Bar at 40ºC

Applications

Plating Solutions, Pre RO/Di, Chemicals, Petrochem

Outer Diameter

69mm

Normal Operating Temperature

up to 65 ºC

Filtration Area

0.65m2 Per 10 ′′

Max.Operating Temperature

90ordm;Catp≤1.0 Bar

Forward Flow Direction

4.2 Bar at 25 Ordm;C

Reverse Flow Direction

2.1 Bar at 25 ºC

pH Value Compatibility

1-14

Extractables

0.03G/10′′

Trademark

FROTEC

Transport Package

Carton

Specification

10′′

Origin

China

HS Code

8421999090

Product Desciption

10" PP Melt Blown Filter Cartridge/ pp spun cartridge/ pp filter cartridge
1.Brief introduction and Technical Specification

Frotec high performance PP Melt Blown Filter Cartridges are constructed from high-tech and precisely automatic controlled machines. The cartridges are 100% made of FDA grade polypropylene resin which is ideal for most general filtration requirements. The fiber matrix of the filter cartridge has been engineered to provide structural integrity throughout the long service life and stable pressure drop. Excellent character of non-fiber releasing provides optimum fluid purity and eliminates foaming.

*100% polypropylene construction provides excellent chemical compatibility with a variety of process fluids and applications.
*Graded pore construction provides optimum particle retention and prevents media migration, ensuring consistent filtration performance.
Free of binders, additives and lubricants.
*Low pressure drop, high dirt holding capacity and long service life.
*Manufactured by FDA grade polypropylene resin.

Type	Melt-Blown Filter Cartridges
Filter Media	Polypropylene
Nominal Length	10'',20'',30'',40''
Micron Rating	1, 5, 10, 25, 50, 75, 100 μm
End Cap	DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin
Operating Conditions	3.0 bar at 21ºC, 2.0 bar at 40ºC, 1.0 bar at 60ºC
Applications	Plating Solutions, Pre RO/DI, Chemicals, Petrochemical Process, Food & Beverage, Electronics

Material of construction	Filter media	Polypropylene
	Support layers	Polypropylene
	Micron rating	0.1,0.2,0.45,0.65,1.0,2.0,3.0,5.0,10,30,50,70,100 um
	Inner core	Polypropylene
	outer cage, end cape	Polypropylene
	Seal method	Thermal bonded, no adhesives
	O-ring/Gaskets	EPDM, slicone, buna, viton
Cartridge dimensions	Outer diameter	69mm
	Inner diameter	28 mm
	Length (based on DOE end Cap)	10''-254mm,20''-508mm 30''-762mm,40''-1016mm
	Filtration Area	0.65m2 per 10 ''
Operating conditions	Normal operating temperature	Up to 65 ºC
	Max.operating temperature	90 ºC at p ≤1.0 bar
	Forward flow direction	4.2 bar at 25 ºC
	Reverse flow direction	2.1 bar at 25 ºC
	Ph value compatibility	1-14
	Sterilization temperature time	Steam sterilization for 30 minutes at 121 ºC,100 cycle, autoclave 30 minutes
Cartridge safety	Endotoxin	<0.25 EU/ml
Cartridge safety	Extractables	0.03g/10''

Specification of pp spun washable water filter
Material of Construction
• Filter Media: Polypropylene
• Core: Polypropylene or not
• Seal Material:Silicone,EDPM,Buna,Viton,
• Micron Rating: 1µm, 3µm, 5µm, .. 100µm

Dimensions Industrial PP melt blown filter cartridge:
• Outside diameter: 2.5" (62-65mm),4.5"(110-115mm)
• Inside diameter:28mm or 30''
• Length: 5", 10", 20", 30", 40"

Recommended Operating Conditions
Max. Operating Temperature: 80°C
Max. Differential Pressure: 2.0 bar @ 21°C

Ordering guide of PP melt blown filter cartridge:

Model PPF	Support Cor	Dimension	Micron Rating	End Adaptor	Seal	Length Inch
PPF-A Standard PPF-B Thin groove PPF-C Broad groove	P- PP N- None	A- ID28mm OD2.5" B-ID28mm OD4.5" C- ID30mm OD2.5" D-customize	1:1μm 3:3μm 5:5μm 10:10μm ........ ........ 100:100 μm	0-DOE 1 - 226/Fin 2 - 222/Fin 3- 222/Flat closed	E-EPDM N-Buna S-Silicone V-Vito	5: 5" 10: 10" 20: 20" 30: 30" 40: 40" 50:50"