Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel

China Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel, Find details about China Fire Alarm Control Panel, Fire Control from Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel

Model NO.
AW-CFP2166
Zones
1-32
Mains Supply Voltage
110VAC/240VAC
Internal Power Supply
27.2VDC
Total Output Current Limited
3A @ 240VAC
Batteries (Default Configuration)
12V2ah*2
Main Supply Monitor for Fault
Yes
Battery Protection for Low Voltage
Yes
Number of Circuit
12V2ah*2
Number of General Circuits
2
Colour
Red
Warranty
2 Year
Trademark
Asenware
Transport Package
EPE Inside, Carton Outside
Specification
CE
Origin
Guangdong, China
HS Code
8531100000
Model NO.
AW-CFP2166
Zones
1-32
Mains Supply Voltage
110VAC/240VAC
Internal Power Supply
27.2VDC
Total Output Current Limited
3A @ 240VAC
Batteries (Default Configuration)
12V2ah*2
Main Supply Monitor for Fault
Yes
Battery Protection for Low Voltage
Yes
Number of Circuit
12V2ah*2
Number of General Circuits
2
Colour
Red
Warranty
2 Year
Trademark
Asenware
Transport Package
EPE Inside, Carton Outside
Specification
CE
Origin
Guangdong, China
HS Code
8531100000

AW-CFP2166 Zones Conventional Fire Alarm Control Panel
Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel

Product desriptions:

1-32 Zone Fire Supression Alarm Detection System
Key Descriptions:
1. R&D based on EN54 part 2 & 4 standard.
2. Modularized design & flexible extendable capacity.
3. Two-level control mode by a lock
4.27VDC power supply output.
5. FIRE PROTECTION, FIRE ROUTING and FAULT signal output, the output can be configured to dry relay type or wet sources type.
6.2 channel general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. RESET button to reset the panel.
10. SILENCE button to stop BUZZER and SOUNDERS.
11. EVACUATE button to start a manual fire alarm immediately.
12. TEST button to test all LEDs normally.
13. Low-battery protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
14. Optional GSM module is available for fire alarm by SMS.
15. Plus,
We have 3 series fire alarm control systems with time-tested performance:
1.2166 Series: Conventional fire alarm system with optional 1-32 zone panels.
2.2189 Series: Addressable fire alarm system for middle fire project with one loop 324 addresses.
3.2100 Series: Addressable fire alarm control system for big fire project with minimum addresses starting from 648, 648*2, 648*N.
4.FP100 Series: Addressable fire alarm control system , newly develop smart system with 1-8 loops for options


1 / 2 / 4 / 8 / 12-32 zone fire alalrm panel Images:Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel

Our company:

Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel


Product range:

1. Addressable fire alarm system(FP100 series,FP300 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet


Exhibitions:

Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel
 

Certification:
Aw-Cfp2166 Zones Conventional Fire Alarm Control Panel


Contact information:

Contact person: Lisa Liu