Products

Liquid Silicone Rubber for Making Prothesis

China Liquid Silicone Rubber for Making Prothesis, Find details about China Life Casting Silicone, Siliconean Organ from Liquid Silicone Rubber for Making Prothesis

Model NO.
E610
Color
Translucent
Packaging Details
25kg/Drum and 200kg/Drum
Delivery Time
Within 3 Days After Payment Confirmed in Our Bank.
Supply Ability
8 Ton Per Day
Certifications
RoHS.MSDS.SGS ISO9001:2000
Minimum Order Quantity
200kg
Shelflife
10~12 Months
Trademark
Hong Ye silicone rubber
Transport Package
25kg/Drum 200kg/Drum
Specification
RoHS. MSDS. SGS ISO9001: 2000
Origin
Shenzhen China
HS Code
39100000
Model NO.
E610
Color
Translucent
Packaging Details
25kg/Drum and 200kg/Drum
Delivery Time
Within 3 Days After Payment Confirmed in Our Bank.
Supply Ability
8 Ton Per Day
Certifications
RoHS.MSDS.SGS ISO9001:2000
Minimum Order Quantity
200kg
Shelflife
10~12 Months
Trademark
Hong Ye silicone rubber
Transport Package
25kg/Drum 200kg/Drum
Specification
RoHS. MSDS. SGS ISO9001: 2000
Origin
Shenzhen China
HS Code
39100000
                              life casting silicone rubber for artificial limbs 
 
HY-E610 Liquid Silicone for Life Casting is a solvent-free, flowable, 2 Components RTV Silicone rubber. After mixing the E610 A and E610 B at a mix ratio of 1:1 by weight the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for life casting.
 
Application:
HY-E610 silicone rubber is specially developed for life casting. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
 
Specification:
·1:1 mix ration by weight
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
 
Typical Physical Properties 
ProductE 610
Appearance Translucent
Hardness(shore A)10
Mix ratio(A:B)1:1
Viscocity of component A 4500
Viscocity of component B4500
Mixed Viscocity(mPa.s)9000
Tensile strength (kgf/cm2)45±5
Tear-strength  (kN/m)12±2
Elongation(%)600
Pot life/working time (mins)30-40
Curing time/setting time (hrs)3-4hrs(25ºC)
110-20mins(60ºC)
Shrinkage rate (%)0.1
 

Using instructions:
1. Applicable to the injection molding process
2. Mixing component A with B evenly according its mix ratio, it is ready for use after degassing.
3. The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.
 
Notice : 
As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so please do remember thoroughly clean the model and tool before
operation . Besides , please avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won't be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
SHELF LIFE: 
12 months when stored under 24ºC in original unopened packages.
PACKAGE: 
1kg/drum, 5kg/drum, 20kg/drum, 25kg/drum, 200kg/drum
Liquid Silicone Rubber for Making Prothesis
Any morre information of liquid silicone rubber, please feel free to contact Mickey
 

You Might Also Like