Products

Tealth Fashion Instruments Increasing Dental Handpiece

China Tealth Fashion Instruments Increasing Dental Handpiece, Find details about China Medical Equipment, Motor from Tealth Fashion Instruments Increasing Dental Handpiece

Model NO.
105L-01C
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Gear Ratio
1:5 Increase
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
105L-01C
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Gear Ratio
1:5 Increase
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100

TEALTH® LED 1:5 increasing speed contra angle
Order code: 105L-01C
Tealth Fashion Instruments Increasing Dental HandpieceTealth Fashion Instruments Increasing Dental Handpiece
Tealth Fashion Instruments Increasing Dental Handpiece

Features:
1push button head,  burs are not flied out .  inner water supply. 
2. be availabe to replace LED,  LED illumination , self power 
3. detachable head, completely be clean up . 
4. It is used for slitting of cap crown, processing of teeth,cavities and crwon preprations,  restoration surface and removal of fillings. removal of carious marterial
Tealth Fashion Instruments Increasing Dental Handpiece

Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.

You Might Also Like