Cartridge Filter Housing

Multi cartridge filter housings are designed for a higher flow rate application, With top swing blot closure and lifting davit, The housing could load up to 48 Cartridges.length available from 30" up to 40". Applications for this sanitary filter housing include winery, brewery and other food and beverage filtration applications, as well as pharmacy applications. Single cartridge filter housings are designed for a low flow rate application, cartridge length available from 5" up to 40". Applications for this sanitary filter housing including winery, brewery and other food and beverage filtration applications, as well as pharmacy applications.

Bag Filter Housing

Side entry bag filter housing is with inlet on the side of the housing and with outlet on the bottom. Our stainless steel bag filter housing could hold 1 bag up to 8 bags, The design pressure from 0.6 Mpa up to 2 Mpa. We produce bag filter housing according to customer's requirement. The bag housing structure could be side entry, as well as top entry. Inlet and outlet side from DN20 upto DN200. Connection type we have including, Welding, Flange, Union, Triclamp. Finish of bag filter housing including Mirror polish Ra<0.4um for food grade application, Satin or sand blasting for industrial application. Multi bag filter housing is a housing with more than 2 bags, It is designed for a higher flow application, Our stainless steel bag filter housing could hold 1 bag up to 8 bags, The design pressure from 0.6 Mpa up to 2 Mpa. We produce bag filter housing according to customer's requirement. The bag housing structure could be side entry, as well as top entry. Inlet and outlet side from DN20 upto DN200. Connection type we have including, Welding, Flange, Union, Triclamp. Finish of bag filter housing including Mirror polish Ra<0.4um for food grade application, Satin or sand blasting for industrial application.

Lenticular Filter Housing

Lenticuar filter Housing is used in the pre filtration process in wine or beer industrial, Lenticular filter wine is now an alternative to the traditional plate and frame filter. Compared with plate and frame filter , Lenticular filter housing have the absolute advantage of no leakage (product loss), and is more hygienic since it is fully enclosed. Our Lenticular filter housing (Stacked disc filter housing) is designed to suit the most popular lenticular filter module (Stacked disc filter module) by Pall, CUNO, EATON BEGEROW, SATORIOUS. For both DOE(Open on double), and Double O-ring, Plug in module. Our Standard filter design is for 272mm height. 12" or 16" Filter module. The lenticular beer and wine filter housings are all made of food grade 316L (or 304) Stainless steel. With a surface finish mirror polish Ra<0.4um(<20 Ra), Electric Polish (EP) as an option.

Steam Gas Filter Housing

Our steam air filter housing is same design as Parker's or Donaldson's Stainless Steel steam air filter housing is designed to help remove both moisture and solid particles, such as pipe scale and rust from the steam supply. It is a stainless steel unit with a removable sintered austenitic stainless steel element. The body closure could be Tri clamp, Union nuts. And flange. All are easy of maintenance. The main use of the steam filter housing is to clean up factory or plant steam to reduce levels of contamination, such as boiler feed chemicals carried over from the boiler off take, so that the end products not adversely affected. Stainless Steel steam air filter housing Typical application • Highly corrosive pure steam for sterilization of products and equipment in the biotechnology and pharmaceutical industries. • Steam for direct cooking of food products and sterilization of food and beverage containers. • Clean steam for humidification of clean rooms in the pharmaceutical, biotechnology and electronic industries. • Filtered steam for autoclaves in the healthcare or pharmaceutical industries.

FAQ:
Q1. What is your terms of packing?
A: Generally, we pack our goods in plywood case or carton package for small parts.
If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T in advance, 30% as deposit, and finish 70% balance payment before delivery.
We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 3 to 4 weeks after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.

Q6.Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
    2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.