2 Watt RGB Diode Laser Module Manufacturer, Full Color Diode Laser for Laser Show System
China 2 Watt RGB Diode Laser Module Manufacturer, Full Color Diode Laser for Laser Show System, Find details about China Color Laser Diode Module, Stage Laser from 2 Watt RGB Diode Laser Module Manufacturer, Full Color Diode Laser for Laser Show System
★Imported diode, with fine and clear spot, small divergence angle and good collimation
★The temperature control, drive and laser are fully integrated, the structure is small and compact, and the external only needs DC power supply
★After high and low temperature storage and vibration and shock tests, it has reliable stability. When the temperature is in the range of -20 to 70 degrees, it can work stably for 24 hours.
★Precision and scientific heat dissipation design, two-way temperature control and perfect temperature protection function can extend the life of the laser as much as possible.
| Model | RGB2W | ||
| Wavelength (nm) | 638±5 | 525±5 | 450±5 |
| Output power (W) | 0.5 | 0.5 | 1 |
| Beam diameter at the aperture (mm) | 1.5×6 | 2×6 | 2×6 |
| Beam divergence, full angle (mrad) | <4 | <2 | <2 |
| Operating mode | CW | ||
| Power stability | <5% | ||
| Modulation | TTL/Analog | ||
| Warm-up time (minutes) | <5 | ||
| Operating temperature (ºC) | -10~40 | ||
| Cooling mode | Conduction cooling | ||
| Expected lifetime | 10000h | ||
- For samples, normally ship within 1-3 days after payment.
- Normally the samples or large order quantities will be shipped within 5 days after we received the payments,we are not responsible for any accidents,import duties or other import matters.
- For customized products need 7-30 days.
1. The laser has potential harm to the human body and the eyes, It is forbidden to use the laser to irradiate others, especially in the eyes.
2. The power supply itself has no key switch, and the power panel and the input line are exposed, When the laser connects or removes the circuit, it must operate under the condition of power off, in order to prevent the electric shock.
3 It is necessary to ensure that the temperature of the shell of the laser head is close to that of the suitable operating temperature before the laser can be turned on, so as to avoid the excessive temperature difference, which may affect the performance of the laser or damage the device.
4. The product shall be used in a dry, clean and non-static environment with a working temperature of 15 - 50 ºC to avoid high temperature, high humidity, and violent vibration and impact.
5. Do not arbitrarily adjust the potentiometer on the power supply board to avoid the excessive current, circuit board or laser burn.
6. Please do a good job of external heat dissipation measures, as far as possible to maintain the shell heat cooling air path and module cooling air path consistent, lest the temperature is too high, affect or damage the laser.
7. This product power supply for DC-12V does not connect to other power sources, lest damage the laser.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle