Products

3000W Economic Closed Loop Fiber Laser Cutting Machine
3000W Economic Closed Loop Fiber Laser Cutting Machine

3000W Economic Closed Loop Fiber Laser Cutting Machine

China 3000W Economic Closed Loop Fiber Laser Cutting Machine, Find details about China Fiber Laser, Metal Sheet Cutting Machine from 3000W Economic Closed Loop Fiber Laser Cutting Machine

Model NO.
EETO-FLX3015HP-3000W(ECO)
Laser Technology
Fiber Laser
Paint
Red and White
Lead Time
Within 40 Days
Accelerated Speed
1.5g
Assistant Gas
Oxygen,Nitrogen, Compressor Air
Total Electrical Power Consumption
22kw
Dimension
8600*3600*2000mm
Load Capacity
1500kg
Machine Body Technology
Tube Sheet Welding
Annealing
Yes
Abrasive Blasting
Yes
Trademark
EETO
Transport Package
Wooden Case
Specification
5000kg
Origin
China
HS Code
8456110090
Model NO.
EETO-FLX3015HP-3000W(ECO)
Laser Technology
Fiber Laser
Paint
Red and White
Lead Time
Within 40 Days
Accelerated Speed
1.5g
Assistant Gas
Oxygen,Nitrogen, Compressor Air
Total Electrical Power Consumption
22kw
Dimension
8600*3600*2000mm
Load Capacity
1500kg
Machine Body Technology
Tube Sheet Welding
Annealing
Yes
Abrasive Blasting
Yes
Trademark
EETO
Transport Package
Wooden Case
Specification
5000kg
Origin
China
HS Code
8456110090
Choosing a product is choosing a company
3000W Economic Closed Loop Fiber Laser Cutting Machine
 
The reasons of you choose EETO FLX3015:
When you are watching this description, maybe you also wonder about which kind of laser cutting machine can solve your problems nicely due to there are various this kind of machines in the market. After searching online, you found fiber laser cutting machine in charge of the biggest market and growth rapidly in those year. But why like that? What is the difference between fiber laser cutting machine, YAG laser cutting machine, and CO2 laser cutting machine?Can fiber laser cutting machine meet your demands furthest? Please check below, you may have your answer:
Product Advantages:
  1. Excellent Laser Beam Quality: Fiber laser has smaller focus diameter, high work efficiency and high cutting quality.
  2. High Cutting Speed: Cutting speed is more than 24m/min, almost 2~3 times more than same laser power Co2 laser cutting machine.
  3. High Stability: Using the best import fiber laser generator, and all critical components' lifetime up to 100,000 hours.
  4. Save Cost: Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine; Save gas, fiber laser cutting machine has unique air cutting technology, low gas consumption.
  5. High Efficiency Of Photoelectric Conversion: Compare with CO2 laser cutting machine, fiber laser cutting machine have 3 times photoelectric conversion efficiency.
  6. Easy Operation: Fiber line transmission, no adjustment of optical path and suitable for flexible manufacturing requirements.
  7. Low Maintenance: Fiber optical transmission no need reflect lens and xenon lamps, save a lot of maintenance cost.

Processing Materials:
After watching that, we already have some cognition about the performance of fiber laser cutting machine. But we also need to know what kind of materials it can deal with. Actually it's able to cut various of sheet metals, such as: stainless steel, carbon steel, galvanized sheet, electrolytic plate, brass plate, aluminum, manganese steel, various alloy plates, rare Metal and other materials.
Application:
Due to fiber laser cutting machine can deal with varied materials, so it's widely used in electrical equipment, kitchen, elevator, advertising signs, auto decoration, sheet metal production, lighting hardware, display equipment, precision parts, metal products and other industries.
Once you make sure fiber laser cutting machine is what you want, it's time to introduce our FLX3015-3000Wto you.

FLX3015-3000W Parameter:
 
Total weightTons10
Total Power ConsumptionKw23.1
Laser Type Famous IPG fiber generator
Laser Wavelengthnm1070
Fiber Core diameter um100
Resonator Powerw1000200030004000
Maximum Cutting
Thickness		Mild steel mm10202214
Stainless steelmm68107
Aluminummm3564
Net Cutting Diametermm1500*3000
X.Y Axis Drive system Rack and Pinion
Z Axis Drive System Ball screw
Z Axis strokemm130/230
Maximum Travel Speed(Idle speed)M/min120
Maximum Acceleration X,Y Axis SpeedG1.2G
Position Accuracymm/M±0.02
Repeatability Accuracy mm/M±0.03
Cooling Style water
Bearing Weightkg1500
Assistant Gas Oxygen,Nitrogen, Compressor Air
DimensionMM8600*2200*2000
Continuous Working TimeHrs24

 
Product Features:
  1. Even though using either medal sheet or pipe to form machine body is more economic and consume less time, we still decide to combine those two materials only because we want make sure the machine body more sturdy and not easy to be deformed;
  2. The machine body will through standard annealing process in high-temperature, to ensuring precision in long-term;
  3. Abrasive blasting, this process can extend the lifetime of paint, and make it more colorful;
  4. Imported original fiber laser generator with super beam quality and stable performances, laser passes through fiber without reflectors, maintenance free, service life up to 100,000 hours;
  5. Imported motion parts and servo motors, which support high-speed running;
  6. The Cypcut cutting system is very easy to control and able to cut various graphics and words, which makes work efficiency and convenient;
  7. All the original parts combine perfectly to ensure fracture surface is smooth and without deformation,please check the pictures of our cutting sample.
3000W Economic Closed Loop Fiber Laser Cutting Machine
Why EETO can be your partner ?
 
3000W Economic Closed Loop Fiber Laser Cutting Machine

EETO located in Wuhan, China, which city famous for laser industry and well developed. The amount of laser companies are more that half of the whole China. So we have superior geography position. And we already accumulated plenty of stable clients and suppliers after working in laser industry wholeheartedly in those years. We are the most professional supplier of fiber laser cutting machine not only products but also service, please check the detail below:
  1. Product Configuration: For our EETO, we adopt the best configurations and State-of-the-art technology. Not only that, we also focus on every single procedure, so that we can provide the most reliable products to our customers. Owing to the advantages of our products are already recommend. So please check the pictures of our standard configurations for further cooperation:
3000W Economic Closed Loop Fiber Laser Cutting Machine
  1. Service:
    1.1 Pre-sales service:  
    (1) Customization:
    No matter you are terminal clients or equipment agents, our specialized sales team can provide the most suitable project according to your requirements. More than that, we can also provide tailored solution and a series of related product for customers in specific field. Please check the form at the end of this description to get more detail. 

    1.2 After-sales service:
    (1) Package and Delivery:
    Package and delivery are very important parts in after-sales service.  We faced different import policy and complicated shipping situation, so we learned from our abundant sea shipping experiences and provide all-round service to make sure our products arrive safely. For packaging, we make sure:
    1. We use wooden cases that meet international export standard;
    2. The whole machine and parts are well packed and  fixed inside of the wooden case without moving or sliding;
    3. All the motion parts are lubricated and covered with film to avoid direct air contact and thus prevent getting rust;
    4. The wooden cases will be covered with waterproof cloth to prevent rain drops or sea water from entering the wooden case.
3000W Economic Closed Loop Fiber Laser Cutting Machine
(2) Installation and Training:
Our profession engineer will install the equipment in the user's factory. After installation, the technical training which will not less than 4 days will be provided by our company for free in the buyer's site or seller's domestic training and repair center until the operator can handle the device in basic normal use and past the equipment operating, laser basic knowledge, security, maintenance and other tests. The primary training content as shown below:
1. Equipment switch on and off process training;
2. The function of panel and control parameters;
3. The training of cutting control software, and the basic cleaning and maintenance methods of machine;
4. The resolutions for regular hardware malfunction and other precautions during operating.

(3) Considerate Warranty and Efficient Maintenance:
EETO company committed to customers that the equipment has one-year warranty and life-long maintenance. During the warranty period, if the device breakdown or parts damage(except human factors and force majeure), our company will repair it and change the parts(except consumable parts) for free. EETO company will visit all the customer several times annually and provide technical support at any times. The spare parts can also be provided by us in a long-term.
EETO company is committed to all the customers: After-sales Service response time will within 2 hours. Once we get the phone call from the customer, the service engineer will give specific response or reach the buyer site within 24 hours.

3. Our Team:
(1) Recruitment: In order to provide the best products and service to our customer, EETO company strictly control every part of the recruitment. So we have the most experienced sales team. After working in this field and never stop learning, they can provide the optimal scheme to our clients no matter what complicated situation. And our technicians can also solve very difficult technical troubles due to their abundant oversea maintenance and training experiences. Our research and development department always absorb nice ideal from working and try to provide the most advanced and humanization products to our clients.
Training: No matter the new staff or the senior employees, our company provide the related training every month. It's very necessary to keep learning and fresh our mind. Because we will improve our products and service according to clients' feedback. And we also share the stories and solutions which we faced in the work. So that we can learn from each other, and provide the most efficient, optimal solutions to our customers.

(3) Company Principle and Team Work: The EETO members come together not only because of the common interest but for the common dream. We love our job and try to get recognized from it, So all of our staffs work with passion. And we are not only colleagues but also family. We always believe this kind of atmosphere can pass to our clients. EETO want to build a long relationship with our customer not just one-time transaction. We all enjoy the process to solve the problems which our customers faced. Because we know this is the best way to eliminate barriers and improve customer satisfaction. We believed that once we do our job wholeheartedly, the customers will see it and glad to work with us. 

4. Our Sales-Network:
EETO are dedicated to bringing best laser products to the world-wide customers. We are establishing our sales and distributors network all over the world. Now we already had close contact with our clients from all the world like Thailand, Indonesia, Malaysia, Singapore, Taiwan, Spain, Macedonia, Canada, U.S, Mexico, Brazil, Argentina.... Welcome to work with EETO, and WELCOME TO JOIN US!
3000W Economic Closed Loop Fiber Laser Cutting Machine
You maybe confuse about:

FAQ:
Q: Which kind of materials can our machine deal with? And what's the range of cutting thickness?
A: Our fiber laser cutting machine can deal with varied metal materials, such as carbon steel/ stainless steel/ aluminum/ galvanized sheet, but high reflective materials are restricted to be cut with fiber laser, like brass/silver/bronze, etc. If you want to deal with this kind of  materials, please connect us for professional advice.
B: Cutting thickness from 0.5mm to 25mm according to different laser power.

Q: What's working area of our fiber laser cutting machine?
A: Our standard size: 3000*1500mm. We also support tailored type if customer has special requirements, such as 4000*1500mm, 4000*2000mm, 6000*1500mm and 6000*2000mm.

Q: What's the laser power of your fiber laser cutting machine?
A:  Our standard laser power include 300W, 1500W, 700W, 750W, 1000W, 11500W, 2000W, 3000W and 4000W. Usually we recommend Germany IPG laser generator, but we can also offer Raycus Laser if you need.
Q: Can we cut both sheet plate and pipe with one machine?
A: Yes, we have a classic machine can deal with different types of materials which we call 'hybrid machine' , not only Metal sheets but also Round/Square/Rectangle tubes with max diameter or diagonal by 200mm. If that cannot meet your demands, please connect us immediately, professional advice will be given.
Q: What's the procedure of install the fiber laser cutting machine?
A:After signing the contract, a layout drawing of installation will be sent to user within 15 days. The user side need to do those preparation jobs before the equipment arrive. ( including preparations on foundation, water, electricity, gas, air/water pipe, interface, etc).
B:Our professional engineers will be dispatched when machine arrives at buyers' factory, and they will in charge of machine installation, commissioning and staff training, which will last about 3-5 days.
Q: How to make sure after-sales service efficiency and helpful?
A: We give our machine two years warranty(except consumables). Once you face any problem, please contact us ASAP. Due to EETO provide 24 hour on-line service to our clients. Our expert engineers can provide professional suggestion efficiently. And under their professional judgment, our company will send the new parts or engineer to customer site and try to solve the problem at the first timing.


Please let us know the following information for choosing a suitable product:        
Clients Information
1. Which industry do you engage in? ( We can provide industry solutions.)
 
2. May I know your company type? (End user or distributor)
 
Materials Detail
Processing MaterialsCarbon SteelStainless SteelOther  Materials
Command Thickness(mm)   
Max Thickness(mm)   
Dimension of Materials   
Other Demands 
 

 

You Might Also Like