Plastic Film PP PE PET Recycling granulator with compactor
 

1. introduction

1.1Recycling Material of BX Pelletizing Machine:

Material	PE, HDPE, LDPE, LLDPE, PP, CPP, BOPP, EPS etc.
Shape	Film, Bag, Woven bag, Raffia,Bubble film, Foam, nonwoven fabric, Filament,sheet,chips
Type	Loose, Bundle, Roll, Scrap
Origin	Off cut, Washed film, In house waste, Regrind

  

2.Basic data of BX Pelletizing Machine:

Machine Size	Date of Compactor		Data of Single Screw Extruder			Throughput Rate (kg/h)
	Efficiency Volume (Liter)	Motor Power (KW)	Diameter of screw (mm)	L/D	Motor Power (KW)
BX 80	300	37	80	33	45/55	160-220
BX 100	500	55	100	33	90/110	300-380
BX 120	800	90	120	33	132	450-480
BX 130	1000	110	130	33	160/185	500-650
BX 160	1200	132	160	30	220/250	800-1000
BX 180	1400	315	180	30	315	1000-1200

2.Specifications:
4.Working steps of the pelletizing system 

 

2.Crushing and compacting: the rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.

 

3.Plasticization and degassing: A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 32 to 34D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.



*Single Screw extruder melts the material,

*Double-zone vacuum degassing system,

*Self protective system,

*A single-plate double-station screen changer or double-plate four-station installed on head of extruder filtrates the melt.

*Build in hydraulic control.
 

4.Melt filtration: a regular single-plate/ piston double-station screen changer or non-stop double-plate/ piston four-station can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.


 

5..Pelletizing: die-face water ring pelletizing system set as the standard granulating method in ACS system. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.

*Die-face water ring pelletizing system is a standard pelletizing method,

*Self-adjusting pelletizing,

*RPM of rotator blades is automatic based on melt extruding pressure,

*Dewatering vibration sieve combining with horizontal-type centrifugal dewatering have a good drying efficiency.




*PLC/HMI Controlling system,

*All electrical units mounted in a steel cabinet,

*All heaters equip with Ammeters,

*Safety interlock principle applied in the system,

*All electrical units: LS, Schneider, Siemens and ABB.
 

6.Advantages of Our BX Pelletizing Machine:

*Excellent machenical design

*Automatic intellegent control system

*Top brand components

*High safety protection system

*High efficiency

*High output

*Low energy consumption

*Less-labor cost
 

YOU MIGHT INSTERESTED IN FOLLOWING QUESTIONS

1. Are you manufacturer or trading company?

    We are a professional recycling machines manufacturer for more than 15years we supplying full technical support and solutions, timely and professional service, always effort on quality, honest, win-win business for every client.

 2. How do you assistant to install the machine on worksite?

     We are experienced on turn-key project, engineer and technicians will assistant client on construction, installation, commissioning.

 3. How can I get spare parts for replacement in other countries?

   Wearing parts like blades, it is necessary to buy with machine, other parts in stock could be delivery out by express if urgent or by sea within 5days.

 4. Can I use mark machine with different LOGO and color?

      Yes, please confirm details with sales.

 5. Can your customers test the machines?

      Before buying and after production before leaving factory, we test machine you interested or paid with specified materials, free of charge.

If you have any need ,pls feel free to contact with us.