Biomass Syngas Gasification Power Plant Biomass Power Generation Generator
- Waste-to-Eergy (WtE) or energy-from-waste (EfW) is the process of generating energy in the form of electricity and/or heat from the primary treatment of waste. WtE is a form of energy recovery. Most WtE processes produce electricity and/or heat directly through combustion, or produce a combustible fuel commodity, such as synthetic gas fuels.
- Syngas-Biomass is organic matter derived from living or recently living organisms. In the context of biomass as a resource for making energy, it most often refers to plants or plant-based materials which are not used for food or feed, and are specifically called ligocellulosic biomass. As an energy source, biomass can either be used directly via combustion to produce heat, or indirectly after converting it to various forms of biofuel.
- Wood remains the largest biomass energy source today; examples include forest residues (such as dead trees, branches and tree stumps), wood chips. Besides wood, rice husk, crop stalk, straw, straw dust, coconut fabric dust and palm bunch still can be feed stock of biomass gas.
- Municipal Solid Waste (MSW), including household waste, is the residual waste put into a black bin bag or wheelie bin. MSW contains a mixture of recyclable, organic, inorganic and biodegradable materials. Recyclable materials are recovered as many as possible before drying and shredding the remainder to make a Refuse Derived Fuel (RDF) for the process. The energy from waste process, transforms the RDF into a clean hydrogen-rich synthesis gas (syngas). 300 series engines can deal with this kind of hydrogen-rich syngas properly.
Typical gas composition
From feedstocks wood chipComponent | CO | H2 | CH4 | CmHn | H2S | CO2 | O2 | N2 |
Percentage | 23.5% | 7.68% | 5.32% | 0.75% | --- | 10% | 0.11% | 52.4% |
From feedstocks rice husksComponent | CO | H2 | CH4 | CmHn | H2S | CO2 | O2 | N2 |
Percentage | 17.2% | 4.05% | 6.82% | 1.24% | --- | 15.1% | 0.8% | 54.7% |
Gas Quality Suggested- Gas temperature≤40ºC
- Gas pressure 2.5~10kPa
- Pressure change rate≤1kPa/min
- Calorific value ≥ 4.0MJ/Nm3
- Moisture content≤40g/Nm3, no free water
- Impurity content≤30mg/Nm3
- Impurity size≤5μm
- Tar content≤50mg/Nm3
- H2S≤50mg/Nm3
- Total sulfur≤100mg/Nm3
- NH3≤20mg/Nm3
- Cl≤50mg/Nm3
- H2≤50%
- O2≤1%
Gas Generator Specification Model Number (Engine Type) | (Styer,Jichai,Zichai) |
Prime Power/Standby Power | 10kW-500kW/110kW-550kW |
Rated Speed | 1500/1800RMP |
Rated Frequency | 50/60Hz |
Rated Voltage | 400V/230V |
Phase | AC 3-Phase, 4 wire |
Gas consumption | Biomass:2m3.kw/h |
Starting System | DC 24V electric motor |
Cooling method | Water-cooled |
Alternator | Faraday,Siemens |
Exciting method | brushless |
| Item | Technical specification |
Engine | Model | 6300D/M | 6300D/M-1 | 8300D/M-1 | 8300D/M-2 | 8300D/M-3 |
Type | Inline, water cooled, four stroke, spark plug ignition |
Non-turbocharged |
Cylinder number | 6 | 8 |
Cylinder diameter (mm) | 300 |
Rated speed(r/min) | 500 | 600 | 500 | 600 | 600 |
Rated power (kW) | 400 | 440 | 500 | 550 | 660 |
Rated thermal consumption(MJ/kW·h) | ≤11.0 |
Rotate direction (From flywheel) | Clockwise |
Start mode | Compressed air/motor start |
Exhaust temperature (ºC) | ≤600 |
Oil consumption(g/kW·h) | ≤0.8 |
Generator set | Type | 350GFM | 400GFM | 450GFM | 500GFM | 600GFM |
Rated power(kW) | 350 | 400 | 450 | 500 | 600 |
Frequency(HZ) | 50 |
Voltage(V) | 400/6300/10500 |
Current(A) | 631/40/24 | 722/46/28 | 812/52/31 | 902/57/34 | 1083/69/41 |
Power factor (COSΦ) | 0.8 (Lagging) |
Phase and connecting | 3phases 4wires /3phases 3wires |
Dimension (L×W×H) (mm) | 5800×1600×2900 | 6400×1600×2900 |
Weight(kg) | 18000 | 22000 |
Gas Generator Technical FeaturesSyngas-biomass is far different with methane base gas (natural gas, biogas and Coalmine gas etc). Syngas is much more tricky, it is in low heat value, high in tar content and unstable in gas quality (TAR always cause problems of pipeline-blocking, cylinder-pollution and spark plug-jamming etc). So, based on syngas as fuel, it is a headache in fields of gas engines all over the world, there are few engine can't be fired by syngas properly. However, Ettes 300 series low speed engines can work with syngas smoothly. The key reasons are that they have unique and remarkable features & advantages as follows:
- Cylinders Structure in Line & Upright & Concise Layout, which means simple, easy and low cost in operation & maintenance. Engine-Overhaul can be handled at user's site.
- Large cylinder (300mm), long stroke, low speed and big displacement 215L and 242L, which means big reserve power capacity and constant power output.
- Low engine speed at 500 or 600rpm, which means high reliability for continuous operation, sufficient combustion, low exhaust gas temperature and high heat efficiency.
- Naturally aspirated (no turbocharger and Intercooler), which means low failure rate and minimum downtime (TAR in syngas always block and damage turbocharger and intercooler).
- Internal mixing system (for high hydrogen gas over 15%), gas and air intake separately, then mixed in combustion room, which means no risk of backfire and cylinder knocking.
- Strong treatment and resistance ability against TAR, long term trouble free operation. TAR always raises problems of pipeline-blocking, cylinder-pollution and spark plug-jamming etc.
- Compressed Air Starting System, smooth starting, high success rate and easy for maintenance.
- Open Cooling System, adopting plate-type heat exchanger, high efficiency and easy for scale-removal.
- Dismountable intake-valve-box, which means can clean TAR easily and conveniently (no need disassembling of cylinder head).
- Low-speed engine makes the noise lower. The maximum noise ≤100dB. Through silencer, the noise will be ≤70dB.
- Low speed means low components wearing, namely lower cost in spare parts replacement and long life span.
- Long Overhaul Time of 60,000 hours and lifecycle of 20-25 years, which ensure sustainable financial rewards of power plant.
Applicable Low BTU Fuel of Syngas Engines
- Biomass from MSW, Woodchips, Sawdust, Straw, Rice husks, Nut-shells, and Chicken manure etc.
- Industrial tail gas & refinery gas, such as coal gas, coking gas, semi-coke gas, coke oven gas, oilshell tail gas, carbide tail gas, ferrochromium tail gas, yellow phosphorus tail gas, producer gas and paralysis gas etc.
Why Zichai Gas Generator Set?
1. Development and manufacturing internal combustion engine since 1970
2. Factory area over 330000m2 & over 2200 employees
3. Highly versatile power generator with ability to handle more than 20 different gases
4. More than 200 employees dedicated to developing and improving power generator for various gas.
5. More than 1000 systems installed in over 20 countries using a variety of gases.
6. More than 50 people in the Customer Service Department making the Organization very Customer Responsive.
Project References
FAQ
1.Are you a trading company or manufacture?
Manufacture with factory.
2.What kinds of gas generator set do you produce?
It covers for all kinds of gas produced in agriculture and industry, including biomass gas, biogas, natural gas, coal mine gas, coke oven gas, semi-coke gas and syngas, as well as related gas produce equipment.
3.What is your delivery time?
Normally within 60days, it depends on the configuration and quantity, please confirm with us before order.
4.What is your payment terms?
T/T or L/C.
5.How do you pack products?
Standard export packaging. Equipment packing with plastic bag, and with new solid wooden box, suitable for long-distance sea transportation, moisture-proof, earthquake, rust-proof and anti-brutal handling.
6.What is your available port of shipment?
Normally Qingdao port, other ports available according to customers' requirement.