0.025MPa Pressure Loss Desiccant Dryer From China

0.025MPa Pressure Loss Desiccant Dryer From China, Find details about China Compressed Air Dryer, Desiccant Dryer from 0.025MPa Pressure Loss Desiccant Dryer From China

Model NO.
HHL080
Type
Medium
System Maxi. Pressure Drop
0.025MPa
Evaporator
Aluminum
Power
2200V 50 Hz
Connection
RC2"
Flow Rate
8.5m³/Min
Refrigent Type
R410A
Air Compressor Brand
LG/Panasonic/Danfoss
Expansion
Danfoss
with Dt Air Filter Inside
Grade PF/Ao/AA/Ax
Filter Dryer
Eco
Less Pressure Drop
Yes
Input Power
1.87kw
Color
Red
Dew Point Display
LED
Automatic Control
Condensation & Dew Point Temperature Control
Trademark
YUKA
Transport Package
Wooden Cardboard
Specification
115X90X110cm
Origin
China
HS Code
8419399090
Model NO.
HHL080
Type
Medium
System Maxi. Pressure Drop
0.025MPa
Evaporator
Aluminum
Power
2200V 50 Hz
Connection
RC2"
Flow Rate
8.5m³/Min
Refrigent Type
R410A
Air Compressor Brand
LG/Panasonic/Danfoss
Expansion
Danfoss
with Dt Air Filter Inside
Grade PF/Ao/AA/Ax
Filter Dryer
Eco
Less Pressure Drop
Yes
Input Power
1.87kw
Color
Red
Dew Point Display
LED
Automatic Control
Condensation & Dew Point Temperature Control
Trademark
YUKA
Transport Package
Wooden Cardboard
Specification
115X90X110cm
Origin
China
HS Code
8419399090
Air dryer is one of the indispensable equipment, it eliminates all the condensed moisture of compressed air in the industrial field.

The compressed air used in the industrial field contains a lot of moisture, which will not only cause product defects, but also shorten the service life of the equipment. Therefore, it is very important to use clean and pure compressed air without water.

The air dryer is one of the necessary equipment to remove the moisture in the compressed air condensed by the compressor in the industrial field.

HHL series compressed air refrigerated dryer armored design, simple and stylish appearance, combined with pipeline air filter, all filters are aluminum alloy die-casting, imported filter element material, EU authority testing, ensuring high efficient filtering. Only need to be connected to the air compressor to use, no need for cumbersome piping and save labor costs.

The refrigerated air dryer adopts aluminum alloy plate heat exchanger, environmentally friendly refrigerant and microcomputer automatic control, which can visually display the dew point temperature of the dryer; it has multiple protections of temperature and pressure. And inside air dryer installed four pieces of high efficiency compressed air filters with an electronic condensate drain, when install and maintain, it is much more convenient.
0.025MPa Pressure Loss Desiccant Dryer From China
0.025MPa Pressure Loss Desiccant Dryer From China



Technical Specification
The following products are suitable for use at 220V 50HZ, 380V 50Hz voltage, other voltages can be customize:
ModelFlow Rate (m³/min)Power SupplyInput Power (kw)Air line ConnectionRefrigerant TypeInternal Filter (PF/AO/AA/AX)G.W.(kg)Measurement (mm)
HHL0101.2220V 50Hz0.37RC3/4"R134aDT01266800*460*850
HHL0202.4220V 50Hz0.52RC3/4"R134aDT01482900*560*885
HHL0303.6220V 50Hz0.73RC 1"R410aDT01698950*610*885
HHL0606.5220V 50Hz1.26RC 1-1/2"R410aDT0191301200*560*1070
HHL0808.5220V 50Hz1.87RC 2"R410aDT0201601400*610*1200
HHL10011.0220V 50Hz2.43RC 2"R410aDT0201631400*610*1200
HHL12013.5220V 50Hz2.63RC 2"R410aDT0201861450*610*1200
HHL15017.0380v 50Hz3.00DN50 FlangeR407cDT0212101800*850*1286
HHL20023.0380v 50Hz3.70DN65 FlangeR407cDT0222402000*900*1403


Feature
>Intelligent control and protection: constant pressure expansion valve & compressor automatic start and stop
>Display interface: LED dew point temperature display, LED alarm code display, operation status indication
>Temperature control: automatic control of condensing temperature / dew point temperature
>High Pressure Protect:HHL010-HHL020 Temperature Sensor,HHL030-HHL200 Temperature sensor & pressure sensitive intelligent protection
>Low Pressure Protect:Temperature sensor & pressure sensitive intelligent protection



Working conditions & technical requirements
Rated ambient temperature: 38 ° C, max.42 ° C.
Rated inlet temperature: 38 ° C, max. 65 ° C.
Rated air pressure: 0.7Mpa, max. 1.6Mpa.
Pressure dew point under rated conditions: 2 ° C ~ 10 ° C (atmospheric dew point: -23 ° C ~-17 ° C).
Assembly environment: no sun, no rain, and good ventilation, installed in a horizontal hard foundation, no obvious dust and flying flour.