Backstop Clutch for Gearbox Gc-D

China Backstop Clutch for Gearbox Gc-D, Find details about China Backstop, One Way Bearings from Backstop Clutch for Gearbox Gc-D

Model NO.
GC-D
Pakage
Single Box or as Your Requirements
Port
Shanghai;Ningbo
Delivery
10-15days
Export
Worldwide
Trademark
SUMA or OEM
Transport Package
Single Box or as Your Requirements
Specification
P6
Origin
Changzhou, Jiangsu, China
HS Code
84836000
Model NO.
GC-D
Pakage
Single Box or as Your Requirements
Port
Shanghai;Ningbo
Delivery
10-15days
Export
Worldwide
Trademark
SUMA or OEM
Transport Package
Single Box or as Your Requirements
Specification
P6
Origin
Changzhou, Jiangsu, China
HS Code
84836000
Product Model: GC-D

Type GC-D is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
A typical arrangement is to install this type alongside a bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft.
The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission.
If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and uter race of ± S/2.
TYPE
N@m

r/min
mm
kg
inner raceouter raced(H7)D(h7)FLn-d 1b n ×t n
GC-D12471215503000124738203-5.54×1.80.21
GC-D15554211502700155545303-5.55×2.30.44
GC-D206811110001800206858344-5.56×2.80.70
GC-D25902158501300259078376-5.58×3.31.30
GC-D3010038075010503010087446-6.68×3.32.00
GC-D351105476509753511096486-6.610×3.32.60
GC-D4012576060085040125108566-9.012×3.33.90
GC-D4513085552575045130112568-9.014×3.84.00
GC-D50150163447565050150132638-9.014×3.86.00
GC-D55160199542560055160138678-1116×4.37.20
GC-D601702660400550601701507810-1118×4.49.20
GC-D701904370325450701901659510-1120×4.911.8