Products

20A Mini Current Transformer PCB Mounting 500: 1

China 20A Mini Current Transformer PCB Mounting 500: 1, Find details about China Current Transformer, Mini Current Transformer from 20A Mini Current Transformer PCB Mounting 500: 1

Model NO.
ZMCT118I
Insulating Medium
Epoxy Resin
Installation
PCB Mounting
Magnetic Circuit Structure
Combined Type
Voltage Transformation Principle
Capacitive Type
Inner Hole
7.5mm
Turns Ratio
500:1
N.W
15g
Trademark
zeming
Transport Package
Cartons
Specification
ISO9001, ISO14001 RoHS, CE, SGS
Origin
Nanjing, Jiangsu
HS Code
8504311000
Model NO.
ZMCT118I
Insulating Medium
Epoxy Resin
Installation
PCB Mounting
Magnetic Circuit Structure
Combined Type
Voltage Transformation Principle
Capacitive Type
Inner Hole
7.5mm
Turns Ratio
500:1
N.W
15g
Trademark
zeming
Transport Package
Cartons
Specification
ISO9001, ISO14001 RoHS, CE, SGS
Origin
Nanjing, Jiangsu
HS Code
8504311000
ZMCT118I  Current Transformer
Small size, high accuracy, good consistency, for current and power measurement

Structural parameters:

                                         
20A Mini Current Transformer PCB Mounting 500: 1

                                                              Front view                                        Bottom view
                                                                                                   1,2pin: secondary output,  3,4pin: empty pin
The main technical parameters:
modelZMCT118I
input current0~20A (sampling resistor 10Ω)
Rated output current10mA at input 5A
turns ratio500:1
phase angle error≤70'(input 5A, sampling resistor 10Ω)
linear range0~20A (sampling resistor 10Ω)
linearity≤0.6%  (5%dot~120%dot)
Permissible error-0.6%≤ f ≤+0.6% (input 5A, sampling resistor 10Ω)
isolation voltage4500V
applicationPrecise measurement of current and power
EncapsulationEpoxy
installationPCB mounting (Pin length>3mm)
operating temperature-40ºC~+85ºC
Direction for use:
20A Mini Current Transformer PCB Mounting 500: 1

                                           Figure I                                                     Figure II
 
 1. ZMCT118I used for measurement. Typical usage is shown in Figure 1 and Figure 2.
    R is a sampling resistor.
 2. Empty pin can not be grounded.

You Might Also Like