Products

Nickel Base Alloy 625 Tube

China Nickel Base Alloy 625 Tube, Find details about China Nickel Base Alloy 625 Tube, Nickel Base Alloy Tube from Nickel Base Alloy 625 Tube

Trademark
Bao Steel
Transport Package
Fumigated Wooden Box
Specification
diameter 10 to 200mm
Origin
China
HS Code
7304419000
Trademark
Bao Steel
Transport Package
Fumigated Wooden Box
Specification
diameter 10 to 200mm
Origin
China
HS Code
7304419000

 High quality Nickel base alloy 625 pipe

Product Description
 
Outer Diameter:9.5-900mm
Wall Thickness:0.8-30mm
Tolerance:tolerance of diameter:+/-0.13--+/-1.26mm
tolerance of thickness:+/-10%
SURFACE:180G, 320G Satin / Hairline(Matt Finish, Brush, Dull Finish)
PICKLING & ANNEALING
Application:Fluid and gas transport,decoration,construction,medical equipment,aviation,
boiler heat-exchanger and other fields
TEST:Flattening Test, Hydrostatic Test, Intergranular Corrosion Test,
Flattening Test, Eddy Testing, etc
CUSTOMIZED:Other specifications according to customers' requirements
PACKAGE: wooden cases or according to customers'request
Surface Finish                     Definition
     2BThose finished, after cold rolling, by heat treatment,
pickling or other equivalent treatment and lastly by cold rolling
to given appropriate luster.
     BAThose processed with bright heat treatment after cold rolling.
     NO.3Those finished by polishing with No.100 to No.120 abrasives
specified in JIS R6001.
     NO.4Those finished by polishing with No.150 to No.180 abrasives
specified in JIS R6001.
     HLThose finished polishing so as to give continuous polishing streaks
by using abrasive of suitable grain size.
     NO.1The surface finished by heat treatment and pickling or processes
corresponding there to after hot rolling. 304 316L 201 Stainless Steel Pipe

Introduction

Inconel 625 is a Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications.

Chemical Composition of Inconel 625

The compositional range for Inconel 625 is provided in the table below.

Element

Content

Ni

58% min

Cr

20 - 23%

Mo

8 - 10%

Nb+Ta

3.15 - 4.15%

Fe

5% max

Typical Properties of Inconel 625

Typical properties of Inconel 625 are covered in the following table.

Property

Metric

Imperial

Density

8.44 g/cm3

0.305 lb/in3

Melting point

1350 °C

2460 °F

Co-Efficient of Expansion

12.8 μm/m.°C

(20-100°C)

7.1x10-6 in/in.°F

(70-212°F)

Modulus of rigidity

79 kN/mm2

11458 ksi

Modulus of elasticity

205.8 kN/mm2

29849 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply

Heat Treatment (After Forming)

Annealed/Spring Temper

Stress relieve at 260 - 370°C (500 - 700°F) for 30 - 60 minutes and air cool.

Condition

Approx Tensile Strength

Approx Service Temp.

Annealed

800 - 1000 N/mm2

116 - 145 ksi

-200 to +340°C

-330 to +645°F

Spring Temper

1300 - 1600 N/mm2

189 - 232 ksi

up to +200°C

up to +395°F

Relevant Standards

Inconel 625 is covered by the following standards:

•         BS 3076 NA 21

•         ASTM B446

•         AMS 5666

Equivalent Materials

Inconel 625 is the tradename of Special Metals Group of Companies and equivalent to:

•         W.NR 2.4856

•         UNS N06625

•         AWS 012

Applications of Inconel 625

Inconel 625 typically finds application in:

•         Marine

•         Aerospace industries

•         Chemical processing

•         Nuclear reactors

•         Pollution control equipment

 

Stock

Form

Specification

Supply Form

Others

Sheet

Thickness:0.40-4.75mm,General Width:1000,1219,1500mm

Whole Coil or piece of it

Cold Annealed,Surface 2B,2E

Plate

Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)

Whole Coil or piece of it

Single hot rolling,Solid solution annealed state,Surface 1D

Belt

Thickness:0.10-3.0mm,Width:50-500mm

Whole Coil or Specified size

Cold Annealed,Surface 2B,2E

Bar & Rod

Rolled barΦ5-45mm,Length≤1500mm

Polished Bar(circle,Square)

Solution annealing,descaling

Forged barΦ26-245mm,Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

 

Nickel Base Alloy 625 TubeNickel Base Alloy 625 Tube

Packaging & Shipping

PackagingDetails:

Products are well packed and clear labeled according to the regulations and customer's requests.
Delivery Detail:7-15days after receiving deposit
Our Services

1.Our Service For You

Pre-sale Service

1. Sample can be offered with sample charge and courier fee by buyer's side.

2. We have full stock,and can deliver within short time.Many styles  for your choices. 

3. OEM and ODM order are accepted, Any kind of logo printing or design are available.

4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you

5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.  

6. We have 8 year experience of design, manufacture and sell lingerie, we cherish every order from our honor.

 After you choose

1. We will count cheapest shipping cost and make invoice to you at once.

2. Check quality again, then send out to you at 1-2 working day after your payment,

3. Email you the tracking no, and help to chase the parcels until it arrive you.

After-sale choose

1. We are very glad that customer give us some suggestion for price and products.

2. If any question,please contact with us freely by E-mail or Telephone.

Photo for factory

Nickel Base Alloy 625 Tube

 
FAQ

 1. If we travel to China to checking your facility, are you welcome?

Of course, why not?

we will provide the whole accompany from you landing in China. 

Only Give us a call before your arrive.

 

We will pick up you from the airport, living in our company's hotel, and driving by car take you visiting our company.

Warm Welcome!

 

2. How many sales person in your team?

present 8 sales, but more hands help in work, total team is 20+ workers.

So do not worry, not the one person company.

 

3. How Many Years of your company working in this industry?

We are 20+ years, from last century.

Expanding the market, and cultivate our techniques, two ways all in work together.

 

4. Could you show me some photos of your producing working?

here, following is our working plant, all is same when you come to China to audit. 

Contact us

Name:Diana Yang
Phone:+86-21-67768133
 

You Might Also Like