High Bright CE Charging Lighting LED Emergency Module

China High Bright CE Charging Lighting LED Emergency Module, Find details about China LED Light, LED from High Bright CE Charging Lighting LED Emergency Module

Model NO.
LMO102C007P
Brand
Sanforce
Battery
Ni-CD
Material
ABS Plastics or Steel Plate
Product Name
High Bright CE Charging Lighting LED Emergency Mod
Input Voltage
AC 85-265V 50/60Hz
Charge Time
24hrs
Warranty
3 Years
Emergency Time
1.5hrs
Emergency Power
14W
Product Size
155mm*40mm*30mm
Battery Capacity
12V/1200mAh
Output Voltage
DC15-55V
Trademark
Sanforce
Transport Package
Carton
Specification
14W
Origin
China
Model NO.
LMO102C007P
Brand
Sanforce
Battery
Ni-CD
Material
ABS Plastics or Steel Plate
Product Name
High Bright CE Charging Lighting LED Emergency Mod
Input Voltage
AC 85-265V 50/60Hz
Charge Time
24hrs
Warranty
3 Years
Emergency Time
1.5hrs
Emergency Power
14W
Product Size
155mm*40mm*30mm
Battery Capacity
12V/1200mAh
Output Voltage
DC15-55V
Trademark
Sanforce
Transport Package
Carton
Specification
14W
Origin
China

High Bright CE Charging Lighting Led Emergency Module

High Bright CE Charging Lighting LED Emergency Module

Lighting Power

20W

Applicable for

LED Panel lights

Inner package material

ABS enclosure

Charging power

AC110V-AC265V,50HZ/60HZ;

Emergency time

90mins

Emergency power

7W

Emergency Conversion time

0.1sec

Charging time

24h

Battery size

6V2000mAh

Emergency output voltage

DC15-55V

Inverter dimension

155×40×30mm

  

Description

2500mah rechargeable battery pack inverter power is designed specifically to suit constant current type leds and circuits, utilizing dc/dc switcher circuitry.  

LED panel/downlight emergency battery backup system is compatible with range of led fixture ideal for led panel light, led downlight and many other led lighting with external led driver and low voltage 6~90V, emergency power 5%-100% and 30~180 minutes duration. 

 

Lamp is lit by driver in normal working conditions, when main is failure, lamp is lit by battery via inverter/module. 

 

Features

  • IC controlled Dual rate Charger for energy savings.
  • Short circuit protection at battery terminals.
  • Battery reverse protection functionality
  • Charge indicator and test button. The light fittings guarantee safety of people in buildings open to the general public.
  • Automatically actuated in the event of power cuts, these devices (kit + light fitting) offer a good luminous flux to facilitate the evacuation.
  • Comply with European standards EN 61 347-2-7 and offer a high level of quality and safety meeting the various prevailing regulations.
  • Dial the code to suitable voltage of luminiares.1 or 3 h rated duration.
  • Constant current output,emergency power is vaired by lighting output voltage, automatically match with the lighting setting to provide best illuminations.
High Bright CE Charging Lighting LED Emergency Module

High Bright CE Charging Lighting LED Emergency ModuleHigh Bright CE Charging Lighting LED Emergency Module

High Bright CE Charging Lighting LED Emergency Module

High Bright CE Charging Lighting LED Emergency ModuleHigh Bright CE Charging Lighting LED Emergency ModuleHigh Bright CE Charging Lighting LED Emergency ModuleHigh Bright CE Charging Lighting LED Emergency ModuleHigh Bright CE Charging Lighting LED Emergency Module

1 Are there any recommended testing procedures for Sanforce LED Emergency Drivers?

Press the test button to cut the power to the AC driver and switch the system to Emergency Mode. Release the test button to return to Normal Mode. Switch off the circuit breaker to simulate a full power outage. For Initial Testing, allow the unit to charge approximately one hour, and then conduct a short discharge test. Allow 24 hour charge before conducting a one hour test

2 Is there a shelf life to the batteries?

Sanforce emergency drivers include NiCAD batteries. Nickel Cadmium batteries can be stored in either a charged or discharged state. However, long term storage can accelerate battery self-discharge, and lead to the deactivation of reactants. Although the cells can be stored at temperatures between -20°C and +45°C, as with almost all batteries heat can cause deterioration of the active chemicals and it is better to keep the cells in a cool, clean, dry, non-corrosive environment. After prolonged storage, two or three deep discharge cycles may be needed to restore full capacity. When storing for periods longer than a year or two, some performance decay can occur - NiCAD batteries that are on a shelf for longer than a year should be subjected to deep discharge/charge cycle to prevent this decay.

3  It need be charged for the first time usage after installation?

Yes, the battery packs must be charged over 24 hours after installation

4 Can EM kit work with any kinds of lights?

No, we have different EM kit for different lamps, please reference to " How to choose the right emergency battery packs".

5 How to know you choose high temperature battery or regular temperature battery?

The high temperature battery can be trickle charged well even if the emergency kit is in high temperature due to insufficient radiating caused by the lights working for long time. While regular temperature battery stop charging in high temperature that result in emergency light failed to work. We recommend to use high temperature battery for EM kit.

6 Are the emergency modules with over charging protection and discharging protection?

The battery is being charge all along when mains is working, and the charging current will be decreased based on the capacity status of battery packs during charging. When battery pack is changing enough, the charging current is very small, and need not over voltage protection, but on discharging operation the emergency module set a cutting voltage to protect over discharging.

7 How EM kit work?

When the normal supply of AC power fails, the emergency kit senses the power failure and immediately switches to the emergency mode to illuminate lamps. When AC power is restored, the emergency ballast returns to the charging mode until the next power failure or emergency situation. The battery fully recharges within 24 hours.

8 Should the Sanforce LED Emergency Driver have the test switch wired on Line or Neutral?

The test switch can technically be installed on either Line OR Neutral. Neutral is more convenient for most customers for installation purposes depending on where they want to install the test switch. If wired on Line the test switch is sometimes limited to where it can be installed depending on how the building's electrical wiring is configured.

9 I am an OEM and I have a 9W LED fixture, can I use a 12W Sanforce LED Emergency Driver?

You must make sure that the emergency driver characteristics match those of the fixture it is intended for installation with. A) The fixture must have an output power equal to or greater than the intended emergency driver. B) The fixture's LED Load must have an output voltage at same range of both LED fixture.