Gh15 / Gh1015 / Gr-5 /Fe-Ni-Cr-Based Solid Solution Strengthened Wrought High Temperature Alloy /
China Gh15 / Gh1015 / Gr-5 /Fe-Ni-Cr-Based Solid Solution Strengthened Wrought High Temperature Alloy /, Find details about China Gh15, Fe-Ni-Cr-Based High Temperature Alloy from Gh15 / Gh1015 / Gr-5 /Fe-Ni-Cr-Based Solid Solution Strengthened Wrought High Temperature Alloy /
Basic Info.
Model NO.
XD-76
Model NO.
XD-76
Product Desciption
GH1015 is a FE-NI-CR-based solid solution strengthened wrought high temperature alloy. The service temperature is below 950 degrees. The alloy is solid solution strengthened by adding elements such as chromium, tungsten and molybdenum. The alloy has high plasticity and medium endurance and creep strength, good resistance to cold and heat fatigue, as well as good processing and welding performance and structural stability.
GH1015 seamless pipe or welded pipe type:
1 Low and medium pressure boiler seamless tube
2 High-pressure boiler seamless tube
3 seamless pipe for conveying fluid
4Cold drawn or cold rolled precision seamless pipe
5 Petroleum Drilling Steel Pipe
6Hydraulic support special seamless pipe
7 Ship pipes
8Petroleum cracking tube
9Various alloy tubes
GH1015 welded pipe or seamless pipe production executive standard:
1. American AS9100
2. American ASTM B564/ASME SB-575-2007
3. American ASTM 575-06/ASME SB-424
4. Germany EN10204 3.1 DIN17175
5. Chinese National Standard GB/T8162|GB/T6479|GB/T9948|GB5310
6. American boiler and pressure vessel code ASME SA210|ASME SA213
Chemical composition
Carbon C: ≤0.08
Chromium Cr: 19.0~22.0
Nickel Ni; 34.0~39.0
Tungsten W: 4.80~5.80
Mo: 2.50~3.20
Aluminum Al: --
Titanium Ti: --
Iron Fe: more than
Niobium Nb: 1.10~1.60
Vanadium V: --
Boron B: ≤0.010
Cerium Ce: ≤0.050
Manganese Mn: ≤1.50
Silicon Si: ≤0.60
Phosphorus P: ≤0.020
Sulfur S: ≤0.015
Copper CU: ≤0.25
Nitrogen N: --
Mechanical properties
Heat treatment system: 1140-1170ºC, air cooling
Mechanical properties at room temperature:
Yield strength ó0.2/MPa; -
Tensile strength ób/MPa≥680;
Stretching rate δ5(%)≥35;
Reduction of area ψ(%)≥40;
GH1015 processing and welding performance:
Before GH1015 spot welding and seam welding, the material should not be stored for more than 15 days after mechanical polishing. The cracking tendency of argon arc welding is less than 15%. It is recommended to use the same grade or HGH3536\3044 filler material for argon tungsten arc welding. Are there any special requirements for cutting and grinding?
application:
GH1015 alloy has been used in the manufacture of sheet structural steel and other high-temperature components such as aero-engine combustion chambers and afterburners.
Features:
The alloy has a certain age hardening phenomenon during long-term work at 700 degrees to 900 degrees, which reduces the room temperature plasticity. The alloy has a tendency to oxidize along the grain boundary when it is used for a long time above 700 degrees. Enamel coating can be used for effective protection. The high temperature oxidation resistance above 1000 degrees is slightly worse than that of similar nickel-based alloys.
,
Physical properties:
Density: 8.32g/cm3
GH1015 seamless pipe or welded pipe type:
1 Low and medium pressure boiler seamless tube
2 High-pressure boiler seamless tube
3 seamless pipe for conveying fluid
4Cold drawn or cold rolled precision seamless pipe
5 Petroleum Drilling Steel Pipe
6Hydraulic support special seamless pipe
7 Ship pipes
8Petroleum cracking tube
9Various alloy tubes
GH1015 welded pipe or seamless pipe production executive standard:
1. American AS9100
2. American ASTM B564/ASME SB-575-2007
3. American ASTM 575-06/ASME SB-424
4. Germany EN10204 3.1 DIN17175
5. Chinese National Standard GB/T8162|GB/T6479|GB/T9948|GB5310
6. American boiler and pressure vessel code ASME SA210|ASME SA213
Chemical composition
Carbon C: ≤0.08
Chromium Cr: 19.0~22.0
Nickel Ni; 34.0~39.0
Tungsten W: 4.80~5.80
Mo: 2.50~3.20
Aluminum Al: --
Titanium Ti: --
Iron Fe: more than
Niobium Nb: 1.10~1.60
Vanadium V: --
Boron B: ≤0.010
Cerium Ce: ≤0.050
Manganese Mn: ≤1.50
Silicon Si: ≤0.60
Phosphorus P: ≤0.020
Sulfur S: ≤0.015
Copper CU: ≤0.25
Nitrogen N: --
Mechanical properties
Heat treatment system: 1140-1170ºC, air cooling
Mechanical properties at room temperature:
Yield strength ó0.2/MPa; -
Tensile strength ób/MPa≥680;
Stretching rate δ5(%)≥35;
Reduction of area ψ(%)≥40;
GH1015 processing and welding performance:
Before GH1015 spot welding and seam welding, the material should not be stored for more than 15 days after mechanical polishing. The cracking tendency of argon arc welding is less than 15%. It is recommended to use the same grade or HGH3536\3044 filler material for argon tungsten arc welding. Are there any special requirements for cutting and grinding?
application:
GH1015 alloy has been used in the manufacture of sheet structural steel and other high-temperature components such as aero-engine combustion chambers and afterburners.
Features:
The alloy has a certain age hardening phenomenon during long-term work at 700 degrees to 900 degrees, which reduces the room temperature plasticity. The alloy has a tendency to oxidize along the grain boundary when it is used for a long time above 700 degrees. Enamel coating can be used for effective protection. The high temperature oxidation resistance above 1000 degrees is slightly worse than that of similar nickel-based alloys.
,
Physical properties:
Density: 8.32g/cm3
You Might Also Like
6pk783 Fan Belt Vg1500090066 Sinotruk Engine
4lz-6.0p Combine Harvesting Machine
Motorcycle Rectifier for Harley Dyna 74631-08 498263 49-8278......
Dahan Used Qtz63 ( 5613 ) Tower Crane for Rental
Flange Type Vortex Flowmeter for Measuring Water
4D Zero Gravity Full Body Electronic Massage Chair One Butto......
Various Colour and Shape Fun Board, Long Short Surfboard 10 ......
North Benz High Quality Beiben 380HP/420HP 6*4 6*6 Tractor T......
The Blanched Peanut 25/29, 29/33, 35/39
China Solar Cell Ibeacon Manufacture with Rechargeable Batte......