This is underwater spot light has 6 SMD LEDs, the u-shaped bracket can be fixed directly on the ground or on a tripod. You could adjust the angle of the lamp body by loosing the screws on both sides.

The lamp body and bracket are both made of high quality stainless steel, body is structurally waterproof with the silicone ring seal, so that this LED underwater light is waterproof (IP68 rating) and submersible. 

Main Specifications

Front Cover & Housing: Molding shaped stainless steel 304#/316# (316L# available as special order)

Bracket: Stainless steel 304# or 316#

LED Source: 6*1W / 2W / 3W RGB3in1 / 4W RGBW 4in1

Lens: Optical lens, efficiency ≥85%

Glass: Tempered glass T=8mm

Cable gland: IP-68 PG-11 copper and nickel coated

Light Color: Single color/ RGB

Working temperature: -20ºC to 40ºC

PCB: Excellent heat conductivity Aluminum, coefficient of heat conductivity≥2.0w/mk

Gasket: Molding shaped silicone seal

Power cable: H05RN-F 2x0.75mm2 L=2m (for Single color)

                      H05RN-F 4x0.75mm2 L=2m (for RGB)

                      H05RN-F 5x0.75mm2 L=2m (for RGBW)

Product Models

Product Dimension

Product Image

Product Application

Joy and Partner's LED underwater spot lights are bright, energy-saving, and modern design, they are widely used for fish ponds, hotel pools, water shows, park fountains, waterfalls, shopping centers, amusement parks, sea aquariums...Anywhere there is water and lighting required.

*Warning:

Must be installed under the water to prevent the lights from being burnt off because of the over-heating.