Paper Coating Chemicals for Heat Sublimation Transfer Paper

Product Overviews
Model:JRX-01G
Product appearance:White Powder
Water insoluble impurity:<=0.1%
Consumption of per square mater(GSM):8-10(Dry Weight)
Finished Coating Viscosity(CPS):1000-2000
Transfer Rate:93-95%
PH:7-8
Pridyct type:1.Air Knife
                       2.Blade Knife
                       3.Customized  

Characteristic
1.The overall cost of this fast-dry mixed powder is reduced while the usability of the powder remains unchanged;
2.This fast-dry coating powder can improve the efficiency of coating production, and the production speed can be promoted by more than 25%
3.Due to functional improvement, the printing drying rate of this product has been improved more than one time, and it can save large amount of electric powder from the baking lamp.

How to Use
1.Adding proportional water into stirring tank, keep water temperature as same as room temperature.
2.Put whole bag coating powder slowly into agitator while stirring, and keep stirring until the chemical powder dissolving uniformly into water, no lump on the surface of liquid. The dissolution time depends  on the method of agitator.
3.Taking some samples of doing tests after dissolving, and take notes of glue temperature and corresponding viscosity, ensure the qualified testing result before filtration.
4.Two times of filtration before coating on machine with 800-100mesh filter
5.The liquid glue remain on machine is recyclable while coating. It should be through filter screen again and can be used in mixing with fresh liquid coating chemicals.
 

Package&Shipment

* 25KG/bag or agreement packing.

* Shipment will be within 10 days after receive the deposit.