Products

Fiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc Pigtail

China Fiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc Pigtail, Find details about China Cable, Fiber Optic Cables from Fiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc Pigtail

Product Name
Optical Fiber Pigtail
Trademark
OEM/ODM
Transport Package
Professional Packing+Carton
Origin
China
HS Code
854442110
Product Name
Optical Fiber Pigtail
Trademark
OEM/ODM
Transport Package
Professional Packing+Carton
Origin
China
HS Code
854442110
Fiber Optic Cable SC/FC/LC/ST Single/Multimode Simplex/Duplex APC/Upc Pigtail Customizable


Product Image
Fiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc Pigtail
 

 

Parameters 
Prodcuct Parameters
Interface model:SC,FC,LC,ST...Mode:Multi-mode, Single mode
Insertion loss:≤0.3dBNumber of cores:DX,SX
Return loss:≥35dB(MM), ≥55dB(SM)Ferrule type:Class A ceramic ferrule
Reliability:≤0.2dBOperating temperature:-40ºC 85ºC
Repeatability:≤0.1dBFiber type:OS2,OM1,OM2,OM3,OM4
Tensile strength:45KGOuter sheath material:PVC,LSZH,OFNP
Tensile strength:≥200NTest wavelength:850nm~1300nm(MM)
                            1310nm~1550nm(SM)
Mating times:≥1000timesCable outer length:0.9mm,2.0mm(default),3.0mm
Minimum bending radius:38mmOptical fiber specifications:9/125µm,50/125µm,62.5/125µm
 
List No.ItemModelTest requirementsSMMM
PCUPCAPCPCUPC
1ILLC/SC/FC/ST/MU/E2000(Connect with standard plug and standard adapter)
100%test		≤0.3≤0.3≤0.35≤0.3≤0.3
2RLLC/SC/FC/ST/MU/E2000(Connect with standard plug and standard adapter)
10% sampling rate		≥50dB≥50dB≥60dB≥25dB
Field connector, Cold splice(Connect with standard plug and standard adapter)Field connector:Embedded:UPC≥40dB,APC≥50dB
Hot melt type:UPC≥50dB,APC≥60dB
Cold splice:≥40dB
33D pass rateLC/SC/FC/ST/MU/E2000Physical inspection≥85%
4End face standardLC/SC/FC/ST/MU/E2000Physical inspectionNo defects in area A
Allow zone B ≤1μm scratches, ≤2μm spots, and the total number of scratches plus spots is less than 5.
Allow C zone ≤2μm scratches, ≤2μm spots, unlimited number, ≤3μm aprons		No defects in area A
Allow zone B ≤2μm scratches, ≤3μm spots, and the total number of scratches plus spots is less than 5.
Allow C zone ≤3μm scratches, ≤3μm spots, unlimited number, ≤5μm aprons
5Appearance requirementsField connectors, cold spice, adapters, fiber optic connectorsVisual inspection (refer to swatches and sealing samples)Product appearance and corresponding design, manufacturing requirements are everywhere: the appearance should be smooth, clean, free of oil, burrs, no scars and cracks, bright color, good consistency, and the components must be tight and flat; the appearance of the optical cable should be smooth and bright. No impurity, no damage, clear printing, color conforms to product requirements
6Material requirementsadaptersPhysical inspectionThe adaptor should use ceramic sleeves, the outer shell of the adaptor and other plastic parts should be flame-retardant, and the metal material should use HPb59-1 copper
7Tensile test {pigtail (cable) or connector with fiber below Φ1.0mm is not applicable, adapter is not applicable}MTP/MPOTest conditions: A) Load: nN: B) Load time: 10 minutes: C) Load rate: 50N/min<rate<250N/minute; D) Distance from the point of load to the plug: L=22~28CM.
Requirements after the test: A) There should be no mechanical damage such as deformation, falling off, and loosening. B) Optical performance conforms to: Insertion loss change <0.1dB (MU<0.1dB, MTP/MPO<0.3dB) Return loss change <5dB		≥50
FC/SC/E2000≥50
MU/LC≥70
 LC≥90
Leather cable≥50
Hot melt type≥40(Leather cable, 2.0 soft optical cable)
≥50(3.0 soft optical cable)
Embedded type≥30(Leather cable, 2.0 soft optical cable)
≥50(3.0 soft optical cable)
Cold splice≥4(0.125,0.25 optic fiber)
≥10N(0.9 optical cable)
≥30N(Leather cable)
8Tensile strength of adapter locking mechanismSCTest conditions: A) Load: nN: B) Load time: 10 minutes (MU load 1 minute); C) Load rate: 50N/minute; <speed<250N/minute; D) Distance from the point of load to the plug: L =22~28cm.
Requirements after the test: A) There should be no mechanical damage such as deformation, falling off, and loosening. B) Optical performance conforms to: Insertion loss change <0.2dB, Return loss change <5dB		≥50
MPO
LC≥80
MU


ApplicationsFiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc PigtailFiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc PigtailFiber Optic Cable Sc/FC/LC/St Single/Multimode Simplex/Duplex APC/Upc Pigtail
 

You Might Also Like