China MP500 Lithium Battery Pack 22.2V 23.4ah Mobile Power Supply with BMS 500W Pure Sine Wave Inverter with DC AC USB Output for Outdoor Emergency Use, Find details about China Lithium Ion Battery, Solar Battery from MP500 Lithium Battery Pack 22.2V 23.4ah Mobile Power Supply with BMS 500W Pure Sine Wave Inverter with DC AC USB Output for Outdoor Emergency Use
Parameters of portable energy storage power supply | |||||
Project | Minimum | Standard | Max | Remarks | |
Dcin input port parameters | Standard input voltage range | 12Vdc | 25Vdc | 26Vdc | The product is equipped with 25V / 4A adapter as standard; |
Input charging current | - | 4A | 6A | Max:120W | |
PV input | --- | 18v | --- | Current Max:6A | |
Input polarity reverse connection protection | --- | Support | --- | When the input is short circuited, it cannot be charged, and there is no display on the display | |
Dc5525 cigarette lighter output port parameters | Output voltage range | 12Vdc | 14Vdc | 15Vdc | |
Rated output current | --- | 8A | --- | ||
Current limiting protection | 8.1A | 9A | 10A | If the output current exceeds this current limit point, the output will be closed and the overcurrent will be released. It is necessary to manually press the DC switch to restore the output | |
Short circuit protection | --- | Yes | --- | The output terminal and wire are short circuited to external equipment, and the output port stops output. When the short circuit is removed, manually press the DC switch to restore the output. In the process of short circuit, the product will not cause malignant events | |
Remarks: Overload and short circuit are destructive tests, the time shall not exceed 3S, and continuous operation is not allowed; | |||||
Qc3.0 output port parameters | 5V no-load output voltage | 4.7V | 5.0V | 5.6V | |
5V full load output voltage | 4.5V | 5.0V | 5.5V | ||
5V rated output current | --- | 2.5A | --- | Overcurrent 3.1-4.5a | |
9V no-load output voltage | 8.7V | 9.0V | 9.6V | ||
9V full load output voltage | 8.5V | 9.0V | 9.5V | ||
9V rated output current | --- | 2.0A | --- | ||
12V no-load output voltage | 11.7v | 12.3v | 13.0v | ||
12V full load output voltage | 11.5V | 12.0v | 12.5v | ||
12V rated output current | --- | 1.5A | --- | ||
Automatic identification | --- | Yes | --- | Output corresponding voltage and current according to different loads | |
Remarks: Overload and short circuit are destructive tests, the time shall not exceed 3S, and continuous operation is not allowed; Test short circuit overload can only be tested at 5V. Overload and short circuit can work normally after removing the load; | |||||
Project | Minimum | Standard | Max | Remarks | |
Type-C output port parameters (PD3.0/60W protocol) | 5V no-load output voltage | 4.5V | 5.0V | 5.7V | |
5V full load output voltage | 4V | 5.0V | 5.5V | ||
5V rated output current | 3A | Overcurrent 3.1-4.5a | |||
9V no-load output voltage | 8.5V | 9V | 9.7V | ||
9V full load output voltage | 8V | 9V | 9.5V | ||
9V rated output current | --- | 3A | --- | ||
12V no-load output voltage | 11.5V | 12V | 12.7v | ||
12V full load output voltage | 11V | 12V | 12.5V | ||
12V rated output current | --- | 3A | --- | ||
15V no-load output voltage | 14.5V | 15V | 15.7v | ||
15V full load output voltage | 14V | 15V | 15.5V | ||
15V rated output current | --- | 3A | --- | ||
20V no-load output voltage | 19.5V | 20V | 21v | ||
20V full load output voltage | 19V | 20V | 20.5V | ||
20V rated output current | --- | 3A | --- | ||
--- | yes | --- | Output corresponding voltage and current according to different loads | ||
Remarks: Overload and short circuit are destructive tests, the time shall not exceed 3S, and continuous operation is not allowed; Test short circuit overload can only be tested at 5V. Overload and short circuit can work normally after removing the load; | |||||
AC output port parameters | No load output voltage | 105Vac | 110Vac | 115Vac | American rules / Japanese rules |
On load output voltage | 99V | 110V | 121V | American rules / Japanese rules | |
No load output voltage | 215Vac | 230Vac | 240Vac | China regulation / Europe regulation / Australia regulation | |
On load output voltage | 198v | 230v | 245v | China regulation / Europe regulation / Australia regulation | |
Output waveform | --- | Sine wave | --- | Rated R load | |
Output frequency | 59Hz | 60Hz | 61Hz | American rules / Japanese rules | |
Output frequency | 49Hz | 50Hz | 51Hz | China regulation / Europe regulation / Australia regulation | |
Rated output power | --- | 550W | --- | Battery module rated input 20.4~25.2 vdc rated pf1.0r load | |
Output power factor | 0.8 | 1 | --- | Rated input of battery module: 19.2~25.2 vdc, rated r load | |
Efficiency | 85% | --- | --- | Average efficiency of on load current at four points of 40%, 60%, 80% and 100% (for reference only) | |
Short circuit protection | --- | YES | --- | If the output terminal, wire or external equipment is short circuited, turn off the inverter output. The product shall not be damaged during the short circuit, and the output shall be restored manually | |
Overload protection | 510W | 550W | 590W | When the load power of DC + USB + AC is greater than 360W, trigger overload protection, turn off AC, keep DC and USB output (rated input of battery module is 20.4~25.2 vdc, rated r load) | |
Inverter over temperature protection | 85ºC | --- | --- | After protection, the inverter output is stopped and needs to be restored manually | |
Remarks: Overcurrent, overload, short circuit, etc. are destructive tests. The time shall not exceed 3S and continuous operation is not allowed; | |||||
Parameters of LED lighting lamp and warning lamp | Lamp power | --- | 3W | --- | |
Color temperature | 2800K | 3000K | 3200K | ||
Working mode | Normally on: short press the constant once, and then short press once to turn off SOS flashing: short press for 2 consecutive flashes, short press once to change the constant, and then short press once to turn off. | ||||
Wireless charging parameters | Power | --- | 5W | --- | 5V/1A |
Energy storage battery pack parameters | Rated voltage | --- | 22.2V | --- | Optional upon request |
Battery capacity | --- | 23.4Ah | --- | ||
--- | 519.48 WH | --- | |||
Cell internal resistance | --- | ≤40mΩ | |||
0.5c discharge ≥ 21.06ah | |||||
Project | Minimum | Standard | Max | Remarks | |
System protection function | Low power protection | 18V | 18.3V | 18.6V | When the discharge voltage reaches the low voltage, the product stops working |
Charging high temperature protection | 45ºC | 50ºC | 55ºC | If the cell temperature exceeds this range, it is forbidden to charge the battery. | |
Charging high temperature protection recovery | 40ºC | 45ºC | 50ºC | Automatic recovery | |
Charging low temperature protection | -5ºC | 0ºC | 5ºC | It is forbidden to charge the battery when the battery temperature is lower than or equal to 0 ºC. | |
Charging low temperature protection recovery | 0ºC | 5ºC | 10ºC | Automatic recovery | |
Discharge high temperature protection | 60ºC | 65ºC | 70ºC | If the cell temperature exceeds this value, it is prohibited to discharge the battery. | |
Discharge high temperature protection recovery | 55ºC | 60ºC | 65ºC | It cannot be restored automatically. Press the key to restore. | |
Discharge low temperature protection | -10ºC | -15ºC | -20ºC | ||
Discharge low temperature protection recovery | -15ºC | -10ºC | -5ºC | It cannot be restored automatically. Press the key to restore. | |
Working environment parameters | Operating temperature | 0ºC | --- | 40ºC | Ambient temperature for normal operation of the product |
Storage temperature | -20ºC | --- | 45ºC | The product does not work within the storage temperature range and is suitable for storage | |
Operating humidity | 10% | --- | 90% | Ambient humidity for normal operation of the product | |
Storage humidity | --- | 45% | The product does not work within the storage humidity range and is suitable for storage |
Q1. Are you a manufacturer or trading company?