Products

34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails

China 34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails, Find details about China Framing Nail, Paper Tape Framing Nail from 34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails

Model NO.
3-1/2 Inch x 0.131
Head Type
D Type
Surface Finishing
Bright Smooth
Customized
Customized
Business Type
Manufacturer and Trading Company
OEM Service
Available
Degree
34
Trademark
KYA
Transport Package
as Customer Requirement.
Specification
3.1mm
Origin
China
HS Code
731700000
Model NO.
3-1/2 Inch x 0.131
Head Type
D Type
Surface Finishing
Bright Smooth
Customized
Customized
Business Type
Manufacturer and Trading Company
OEM Service
Available
Degree
34
Trademark
KYA
Transport Package
as Customer Requirement.
Specification
3.1mm
Origin
China
HS Code
731700000
34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails

Product Overview:

--For use in 34 degree paper tape collation framing nailers.
--Paper tape collated smooth shank.
--Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber.
--Offset full head, also compatible with clipped head framing nailers.
 
 
Product Description:
 
Name34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails
Diameter3.33mm(0.131")
Length50mm-100mm
ShankSmooth, Ring, Screw
FinishingBright, EG, HDG, DACR, MechGalv, Heat Treated,SS304
CoatingYellow, Red, Blue
Fitting ToolsSENCO, BEA, BOSTICH, HITACHI, OMER, PASLODE etc
SamplesSamples are free.
OEM ServiceOEM is available if you provide a drawing or sample.
 
34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails


Packing: 
 
DescriptionPackage PCS/CTN
3.1 x 90mm EG(12um) Smooth2000 nails
3.1 x 90mm EG(12um) Smooth2000 nails
3.1 x 90mm Bright Smooth2000 nails
3.1 x 90mm EG(12um) Ring2000 nails
3.1 x 90mm EG(12um) Ring2000 nails
3.1 x 90mm Bright Ring2000 nails
3.1 x 90mm EG(12um) Smooth2000 Nails
3.1 x 90mm Bright Smooth2000 Nails
3.1 x 90mm EG(12um) Ring2000 nails
3.1 x 90mm Bright Ring2000 nails
  
3.1 x 75mm EG(12um) Ring2000 nails
3.1 x 75mm EG(12um) Smooth2000 nails
3.1 x 75mm HDG Ring2000 nails
3.1 x 75mm Bright Smooth2000 nails
3.1 x 75mm Bright Ring2000 nails
3.1 x 75mm EG(12um) Ring2000 nails
3.1 x 75mm Bright Ring2000 nails
3.1 x 75mm EG(12um) Smooth2000 nails
3.1 x 75mm Bright Smooth2000 nails
  
3.1 x 63mm Bright Smooth2000 nails
3.1 x 63mm EG(12um) Ring2000 nails
3.1 x 63mm Bright Ring2000 nails
3.1 x 63mm EG(12um) Smooth2000 nails
3.1 x 63mm HDG Ring2000 nails
3.1 x 63mm Bright Smooth2000 nails
3.1 x 63mm EG(12um) Ring2000 nails
3.1 x 63mm Bright Ring2000 nails
3.1 x 63mm EG(12um) Smooth2000 nails

Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.

Hot Dip Galvanized (HDG)
Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.

Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.

Stainless Steel (SS)
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. 

 Smooth Shank
Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.

Ring Shank
Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.

Screw Shank
A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.

Annular Thread Shank
Annular thread is very similar to a ring shank except the rings are externally beveled which presses against the wood or sheet rock to prevent the fastener from backing out.



Usage: 

Furnituring, Decoration, Construction and so on
34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails





Production Process:
34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails

                                               

FAQ:

1.Q:Do you have your own production factory?
   A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China

2.Q: Can you send us samples?
   A: We are pleased to send you the sample to test the quality and market.
 
3.Q: About your products, could you do it OEM?
   A: Yes, OEM service is available.
 
4.Q: Do you also provide spare parts of pneumatic tools? 
    A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
 
5.Q: For the product, could you spray other color of painting?
    A: Yes, color can be customized.
 
6.Q: What's the delivery time?
    A: It usually takes about 20-30 working days to produce one order.
 
7.Q: How is the payment terms?
    A: Normally T/T 30% in advance and T/T 70% before shipment.
 
8.Q: Can I mix different models in one container?
    A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
   
9.Q: How does your factory do regarding quality control?
      A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
 
10.Q: Do you have quality certification?
      A: Yes, we have CE, SGS,ISO, ect.
 


About Us:
 
34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails
34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails




Contact Us:

34 Degree 3-1/2 Inch Galvanized Clipped Head Framing Nails

 

You Might Also Like