HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.Main Technical Parameter
Type: HPM50/20
Suitable foaming system: Flexible foam, integral skin foam
Suitable material viscosity 22 degree centigrade
Polyol: Max. 3000 mPa. S
Isocyanate: Max. 1000 mPa. S
The flow capacity ranges: 100~950g/s
Mixing ratio range adjustable ~2-2.5: 1
Pouring programming time: 0.50~99.99sec
Power supply required: 3× 380V/50Hz± 10%
Total power: ~41kw
Control voltage: AC220V/DC24V
Floor space: ~2, 600mm× 4, 600mm
Mold installation board area: 2000× 1450mm
Mold installation space height: 830mm
Movable mold-plate stroke: 100mm
Mold-open angle: ~30°
Hydraulic working pressure: 8~12MPa
Control voltage: AC 220V/DC24V
NO. | Item | Main Technical Parameter |
1 | Mold installation board area | 2000*1450mm |
2 | Mold installation space height | 830mm |
3 | Movable mold-plate stroke | 100 mm |
4 | Mold-openangle | ~30° |
5 | Control voltage | AC 220V/DC24V |
6 | Hydraulic working pressure | 8~ 12MPa |