IEC60335 Test Equipment
China IEC60335 Test Equipment, Find details about China Washing Machine Energy Efficiency Test Equipment, Washing Machine Energy Efficiency Test from IEC60335 Test Equipment
Basic Info.
Model NO.
QX-PN65-3652
Loading Method
Dynamic Load
Display
Needle
Control
Computer Control
Weight
1000-2000Kg
Power Source
AC380V
Oil Cylinder Position
No
Trademark
ALLISON
Transport Package
Wooden Box
Specification
5000*4200*2500
Origin
Made in China
Model NO.
QX-PN65-3652
Loading Method
Dynamic Load
Display
Needle
Control
Computer Control
Weight
1000-2000Kg
Power Source
AC380V
Oil Cylinder Position
No
Trademark
ALLISON
Transport Package
Wooden Box
Specification
5000*4200*2500
Origin
Made in China
Product Desciption
Water heater test equipment
Introduction:
GB/T4288-2008 IEC60450 GB23118-2008 GB4706.24-2008 household and similar electric washing machines; GB/T 23119-2008 household and similar electrical appliances used in the performance test of hard water The washing machine test water supply system consists of a water softening device, water hardness ratio, constant pressure water supply, electrical parameters/water flow detection, constant temperature and pressure water supply pipelines, and control system. It mainly provides ratio test water at constant temperature for washing machine performance test Operate under pressure water source, and evaluate the energy efficiency level through relevant test data;
Technical characteristics:
1. Water hardness: 40-100ppm, automatic ratio (optional manual/automatic).
2. The conductivity of the outlet water of the water purifier <10μs/ CM (raw water <500μs/ CM)
3. Total water supply: 1--3 cubic meters/hour
4. Cooling water temperature: 5ºC--- 50ºC can be set arbitrarily
5. Heating water temperature: RT + 5 ---- can be arbitrarily set within 90ºC
6. Water supply pressure: outlet pressure (0.05-0.8MPa)
7. Test water pressure: 0.1-0.8Mpa adjustable
8. Flow detection: 0.1L-200L/min
9. Equipment power supply voltage 380V 20KW
10. Maximum 30-50 square meters
11. Station: 5-20 station
12. Display mode: 42-inch display 13. Equipment remote control: 4G / 5G wireless control
--------------------------------------------------------------------
Introduction:
GB/T4288-2008 IEC60450 GB23118-2008 GB4706.24-2008 household and similar electric washing machines; GB/T 23119-2008 household and similar electrical appliances used in the performance test of hard water The washing machine test water supply system consists of a water softening device, water hardness ratio, constant pressure water supply, electrical parameters/water flow detection, constant temperature and pressure water supply pipelines, and control system. It mainly provides ratio test water at constant temperature for washing machine performance test Operate under pressure water source, and evaluate the energy efficiency level through relevant test data;
Technical characteristics:
1. Water hardness: 40-100ppm, automatic ratio (optional manual/automatic).
2. The conductivity of the outlet water of the water purifier <10μs/ CM (raw water <500μs/ CM)
3. Total water supply: 1--3 cubic meters/hour
4. Cooling water temperature: 5ºC--- 50ºC can be set arbitrarily
5. Heating water temperature: RT + 5 ---- can be arbitrarily set within 90ºC
6. Water supply pressure: outlet pressure (0.05-0.8MPa)
7. Test water pressure: 0.1-0.8Mpa adjustable
8. Flow detection: 0.1L-200L/min
9. Equipment power supply voltage 380V 20KW
10. Maximum 30-50 square meters
11. Station: 5-20 station
12. Display mode: 42-inch display 13. Equipment remote control: 4G / 5G wireless control
--------------------------------------------------------------------
Machine inlet valve test equipment
Introduction:
The inlet valve life test bench is mainly suitable for continuous and periodic life testing of inlet valve parts under constant water temperature and pressure. In a normal temperature environment, through system setting and control, a long-term on/off life test is performed on the tested inlet valve. The whole equipment system is controlled by PLC program, manual quick installation, one-key start test mode.
Constant pressure water supply system: using water circulation method, the test water flows back to the 304 stainless steel water storage tank after passing through the filter. The multi-stage water pump is used as the power source for the water pressure test, and the pressure of the water supply is constant through a two-stage pressure storage system. The pipeline is spliced with 304 stainless steel, and the pipeline layout is clear and beautiful.
Technical characteristics:
1. Inspection station: 10-40 stations
2. Output voltage: 0-250V (adjustable) DC 0-36V
3. Time setting: 0~99999 hour/minute/second (adjustable).
4. Time mode selection: long-term operation/periodical operation
5. Control mode, 7 touch display + PLC
6. Power supply: 220V 4.5KW
7. Equipment size: 2500 X 650 X 1650 Unit: MM
8. Pressure range: 0-1.5Mpa
9. Water temperature range: RT+10--80 degrees adjustable
10. Test times: 0-99999 times
--------------------------------------------------------------------
Introduction:
The inlet valve life test bench is mainly suitable for continuous and periodic life testing of inlet valve parts under constant water temperature and pressure. In a normal temperature environment, through system setting and control, a long-term on/off life test is performed on the tested inlet valve. The whole equipment system is controlled by PLC program, manual quick installation, one-key start test mode.
Constant pressure water supply system: using water circulation method, the test water flows back to the 304 stainless steel water storage tank after passing through the filter. The multi-stage water pump is used as the power source for the water pressure test, and the pressure of the water supply is constant through a two-stage pressure storage system. The pipeline is spliced with 304 stainless steel, and the pipeline layout is clear and beautiful.
Technical characteristics:
1. Inspection station: 10-40 stations
2. Output voltage: 0-250V (adjustable) DC 0-36V
3. Time setting: 0~99999 hour/minute/second (adjustable).
4. Time mode selection: long-term operation/periodical operation
5. Control mode, 7 touch display + PLC
6. Power supply: 220V 4.5KW
7. Equipment size: 2500 X 650 X 1650 Unit: MM
8. Pressure range: 0-1.5Mpa
9. Water temperature range: RT+10--80 degrees adjustable
10. Test times: 0-99999 times
--------------------------------------------------------------------
Washing machine tractor test
Introduction:
The testing machine is made of profiles and powder spray cabinets. It is mainly used for long-term and periodic on-off life testing and basic performance testing of washing machine tractors. The equipment has 40 stations, the distribution method is 4 floors, and each floor has 10 stations. Through the touch screen control, long-term and periodic life tests are performed on the tested products. Each station runs independently with load, and the station is equipped with independent wiring ports for easy connection to external voltage. In order to prevent excessive impact, the workstation platform has anti-noise and anti-vibration functions. The anti-impact device is installed at the load position of each station, which can effectively reduce the vibration and noise caused during the test. Beautiful appearance of the equipment. High operational stability. Easy to operate. No need for special operation.
Technical characteristics:
1. Output voltage: AC 0-250V (adjustable) DC: 0-36V
2. Time setting: 0~99999 hour/minute/second (adjustable).
3. Time mode selection: long-term operation/periodical operation
4. Function: time setting / periodic setting
5. Pipeline: not lure steel pipe + hose connection
6. Control interface, touch +7 inch touch
7. Power supply: 220V 50HZ 4.5KW
8. Equipment size: 2500 X 950 X 1650 Unit: MM
9. Load: 0-100N optional
10. Test time and frequency: 0-99999 times
--------------------------------------------------------------------
Introduction:
The testing machine is made of profiles and powder spray cabinets. It is mainly used for long-term and periodic on-off life testing and basic performance testing of washing machine tractors. The equipment has 40 stations, the distribution method is 4 floors, and each floor has 10 stations. Through the touch screen control, long-term and periodic life tests are performed on the tested products. Each station runs independently with load, and the station is equipped with independent wiring ports for easy connection to external voltage. In order to prevent excessive impact, the workstation platform has anti-noise and anti-vibration functions. The anti-impact device is installed at the load position of each station, which can effectively reduce the vibration and noise caused during the test. Beautiful appearance of the equipment. High operational stability. Easy to operate. No need for special operation.
Technical characteristics:
1. Output voltage: AC 0-250V (adjustable) DC: 0-36V
2. Time setting: 0~99999 hour/minute/second (adjustable).
3. Time mode selection: long-term operation/periodical operation
4. Function: time setting / periodic setting
5. Pipeline: not lure steel pipe + hose connection
6. Control interface, touch +7 inch touch
7. Power supply: 220V 50HZ 4.5KW
8. Equipment size: 2500 X 950 X 1650 Unit: MM
9. Load: 0-100N optional
10. Test time and frequency: 0-99999 times
--------------------------------------------------------------------
Machine drain pump test
Introduction:
The test bench is mainly used for the long-term and periodic on-off life test of the drainage pump. The equipment has 5 stations. Through the touch screen control, the long-term and periodic on-off life test of the water pump through the relevant test parameters. The test method is to circulate water in the water tank and simulate the actual use by adjusting the height of the water outlet.
Technical characteristics:
1. Station: 1-10 station
2. Output voltage: 0-250V (adjustable)
3. Time setting: 0~99999 hour/minute/second (adjustable).
4. Time mode selection: long-term operation/periodical operation
5. Independent time/period setting for each station
6. Function: time setting/periodical setting
7. Pipeline: Do not lure steel pipe + hose connection
8. Control interface: 7-inch touch screen
9. Adjustable water outlet height: 0-1500MM
10. Equipment power supply: 220V 2.5kw,
11. Test times: 0-99999 times
12. Equipment size: 1200 X 650 X 1750 Unit: MM
--------------------------------------------------------------------
Introduction:
The test bench is mainly used for the long-term and periodic on-off life test of the drainage pump. The equipment has 5 stations. Through the touch screen control, the long-term and periodic on-off life test of the water pump through the relevant test parameters. The test method is to circulate water in the water tank and simulate the actual use by adjusting the height of the water outlet.
Technical characteristics:
1. Station: 1-10 station
2. Output voltage: 0-250V (adjustable)
3. Time setting: 0~99999 hour/minute/second (adjustable).
4. Time mode selection: long-term operation/periodical operation
5. Independent time/period setting for each station
6. Function: time setting/periodical setting
7. Pipeline: Do not lure steel pipe + hose connection
8. Control interface: 7-inch touch screen
9. Adjustable water outlet height: 0-1500MM
10. Equipment power supply: 220V 2.5kw,
11. Test times: 0-99999 times
12. Equipment size: 1200 X 650 X 1750 Unit: MM
--------------------------------------------------------------------
Washing machine door opening and closing life test machine
Introduction:
The door opening and closing life tester is mainly used to test the durability test of door body and door body hinge, to test the quality reliability of door body and hinge, and is suitable for opening/closing ability test of cabinet door. The stepper motor is used as the driving source to drive the fixture to make a reciprocating movement, thereby completing the reciprocating life action of "opening and closing" the cabinet door. Through PLC control, with flexible fixtures, it truly simulates the action of human hands opening and closing the door. The equipment can meet the test requirements of a variety of washing machine/electric oven doors, with strong versatility, simple operation, convenient control and low failure rate.
Technical characteristics:
1. Equipment station: single station
2. Touch screen: 7-inch color touch screen
3. PLC: Japan Mitsubishi, data power failure memory function;
4. Motor: stepper + driver
5. Opening and closing speed: opening/closing speed 1.5m/s±50% adjustable
6. Test angle: maximum 1300;
7. Opening and closing speed: 0-10 times/minute adjustable,
8. Test force of door opening and closing manipulator: the maximum opening force can be adjusted from 10N---200N
9. Counting/timing: 999999 (can be preset)
10. Starting mode: servo drive
11. Switch mode: open the door left and right/open the door up and down/push and pull the door back and forth
12. Overall dimensions of the test equipment: about 900X450X1700 (height) MM
13. Equipment power supply: 220V 1.5KW
--------------------------------------------------------------------
Introduction:
The door opening and closing life tester is mainly used to test the durability test of door body and door body hinge, to test the quality reliability of door body and hinge, and is suitable for opening/closing ability test of cabinet door. The stepper motor is used as the driving source to drive the fixture to make a reciprocating movement, thereby completing the reciprocating life action of "opening and closing" the cabinet door. Through PLC control, with flexible fixtures, it truly simulates the action of human hands opening and closing the door. The equipment can meet the test requirements of a variety of washing machine/electric oven doors, with strong versatility, simple operation, convenient control and low failure rate.
Technical characteristics:
1. Equipment station: single station
2. Touch screen: 7-inch color touch screen
3. PLC: Japan Mitsubishi, data power failure memory function;
4. Motor: stepper + driver
5. Opening and closing speed: opening/closing speed 1.5m/s±50% adjustable
6. Test angle: maximum 1300;
7. Opening and closing speed: 0-10 times/minute adjustable,
8. Test force of door opening and closing manipulator: the maximum opening force can be adjusted from 10N---200N
9. Counting/timing: 999999 (can be preset)
10. Starting mode: servo drive
11. Switch mode: open the door left and right/open the door up and down/push and pull the door back and forth
12. Overall dimensions of the test equipment: about 900X450X1700 (height) MM
13. Equipment power supply: 220V 1.5KW
--------------------------------------------------------------------
Machine key life test machine
Introduction:
The washing machine button life tester is suitable for the durability life test of the buttons on the touch screen panel/mechanical buttons and other related control panels. Adopt PLC and touch screen control system, stable operation, simple and convenient maintenance. Through PLC program control, single-point button/multi-point button linkage operation and program cycle action can be performed. Really simulate the use of button linkage. Carry out durability button life test on the whole machine
Technical characteristics:
1. Test station: single station
2. Each station tests 4-6 keys, and the program loops
3. For different operation panel sizes, the fixture can be replaced
4. Control interface: 7-inch touch display with USB data export function
5. Control mode: single-point control/multi-point linkage program control
6. The test head is made of wear-resistant insulating silica gel/touch metal material,
7. Test speed: 10-40 times/minute adjustable
8. Action stroke: adjustable (depending on product)
9. Test times: 1-999999 arbitrarily set
10. Power supply: 220VAC, 2.5KW
11. Power-on test: current detection
12. Supply voltage: 0-250V adjustable
13. Equipment size: 1200X650X1650MM
--------------------------------------------------------------------
Introduction:
The washing machine button life tester is suitable for the durability life test of the buttons on the touch screen panel/mechanical buttons and other related control panels. Adopt PLC and touch screen control system, stable operation, simple and convenient maintenance. Through PLC program control, single-point button/multi-point button linkage operation and program cycle action can be performed. Really simulate the use of button linkage. Carry out durability button life test on the whole machine
Technical characteristics:
1. Test station: single station
2. Each station tests 4-6 keys, and the program loops
3. For different operation panel sizes, the fixture can be replaced
4. Control interface: 7-inch touch display with USB data export function
5. Control mode: single-point control/multi-point linkage program control
6. The test head is made of wear-resistant insulating silica gel/touch metal material,
7. Test speed: 10-40 times/minute adjustable
8. Action stroke: adjustable (depending on product)
9. Test times: 1-999999 arbitrarily set
10. Power supply: 220VAC, 2.5KW
11. Power-on test: current detection
12. Supply voltage: 0-250V adjustable
13. Equipment size: 1200X650X1650MM
--------------------------------------------------------------------
Washing machine test room
Introduction:
Mainly used for the high temperature and high humidity aging test of the whole washing machine, specifically to detect the long-term operation quality reliability judgment and detection of the washing machine in a high temperature and high humidity environment, control the environmental temperature and humidity through PLC control, and monitor the electrical parameters of the washing machine
Technical characteristics:
1. Room size: provide site space according to the user
2. Humidity range: 90%-98%RH temperature: RT+10-85 degrees
3. Humidity control accuracy:
4. Humidity uniformity: plus or minus 2%
5. Control method: PLC + PID
6. Ventilation mode: automatic ventilation
7. Humidification method: ultrasonic high temperature humidification
8. Voltage: 0-300V adjustable
9. Test station: 0-10 station
10. Temperature detection: K type
11. Power supply: 380V 20KW
--------------------------------------------------------------------
Introduction:
Mainly used for the high temperature and high humidity aging test of the whole washing machine, specifically to detect the long-term operation quality reliability judgment and detection of the washing machine in a high temperature and high humidity environment, control the environmental temperature and humidity through PLC control, and monitor the electrical parameters of the washing machine
Technical characteristics:
1. Room size: provide site space according to the user
2. Humidity range: 90%-98%RH temperature: RT+10-85 degrees
3. Humidity control accuracy:
4. Humidity uniformity: plus or minus 2%
5. Control method: PLC + PID
6. Ventilation mode: automatic ventilation
7. Humidification method: ultrasonic high temperature humidification
8. Voltage: 0-300V adjustable
9. Test station: 0-10 station
10. Temperature detection: K type
11. Power supply: 380V 20KW
--------------------------------------------------------------------
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle