33KHZ 100W Ultrasonic Vibration Transducer for diy Ultrasonic Vibrating Screen

The ultrasonic vibration sieve is a simple, practical, and reliable screening system,  is the most effective solution in the current powder vibration. Fine sieve filter industry can be widely used in the pharmaceutical, metallurgy, chemical industry, mineral processing, food and other requirements of high precision screening filter effectively solve the reunion, static, strong absorption jam mesh screening problems, domestic sieve sub-industry is a major technological breakthrough.

Ultrasound resonant power supply: 38KHz high frequency high power ultrasonic resonant power supply. Built-in micro-computer chip can automatically track the whole digital frequency according to the different states of ultrasound, without manual adjustment, and it is simple and convenient to operate. The oscillator with long working time has low calorific value and stable working condition.

1. High Frequency Connecting Wire: The cable is used to connect the ultrasonic oscillator and the ultrasonic resonance power supply.
Connector: Aeronautical Connection Plug-in.
3. Oscillator: High performance ultrasonic converter.
4. Ultrasound grid: It consists of external grid and resonance ring.
Screen mesh: suitable for 10 to 635 meshes.
 
Characteristic
1) Excellent screening ability and higher screening accuracy, achieve high-precision screening, screening accuracy can be increased by 1-70%, production can be increased by 0.5-10 times.
2) No need to clear the net of rubber balls to eliminate the re-pollution caused by rubber wear.
3) Really solve the problem of screening materials with strong adsorption, easy reunion, high static electricity and light specific gravity.
4) Ensure that the characteristics of the screened materials remain unchanged.
5) Digital signal input to realize automatic frequency tracking.
6) Transducer energy conversion efficiency is high (up to foreign peer standards).
7) 24 hours continuous operation, control power supply and transducer without cooling (up to international standards of similar products).
8) The transducer and screen mesh are connected by screw, which is convenient for disassembly, assembly and cleaning.
9) Separate structure with resonance ring, good effect and long service life of screen.
10) It can screen 25 m powder and 10 m liquid.
11) Effective prevention of screen clogging, difficult to screen materials will hardly clog the mesh. It can control the narrow granularity range.
12) Fixed mesh frame with bonded screen, no pollution, no dead angle, uniform force and convenient replacement.

Base plate will be need weld on the stailess steel frame,then connect well with transducer,it should be used a 32MM wrench tightening ,otherwise vibration strength is small,the transducer will be coming heating.
First step, used stailesss steel make a frame, to fix the sieve,in normal situation, if the sieve of diameter is during 1.5M, the middle stailess steel frame about 570MM of diameter,for round shape
1 a rotating sieve hollow ring with ultrasonic vibration device used in rotating sieve, installation, including its extension preached vibration rings (1), (2) vibrator, ultrasonic vibrator (3), (4) and fixed bracket of ultrasonic power (5), and its features are: vibrator (2) solid in isolation preaching rings (1), (3) ultrasonic vibrator installed on the vibrator (2), the vibration of the internal ring (1) fixed in the device brackets (4) of the upper, ultrasonic vibrator (3) drive cables derivation and connected to the ultrasonic power (5), Referred to preach vibration rings (1), (2) vibrator and ultrasonic vibrator (3) constitute a resonant, Referred to preach vibration with metal rings (1) hollow and bent rectangular tubes.


33KHZ 100W Ultrasonic Vibration Transducer for diy Ultrasonic Vibrating Screen