Products

African 4-Zone Conventional Fire Alarm Control Panel

China African 4-Zone Conventional Fire Alarm Control Panel, Find details about China Fire Alarms, Fire Alarm Control Panel from African 4-Zone Conventional Fire Alarm Control Panel

Model NO.
aw-cfp2166-32
Transmission Mode
Cable
Alarm Volume (within 1m)
≥100dB
Receive Frequency
Wire
Optional Zone Capacity
1-32
Power Supply
240VAC
Backup Battery
24VDC
Fire Detector
Photoelectric Smoke Detector
Temperature Alarm
Thermal Resistor Heat Detector
Wire System
2-Wire System
Exterior Housing
Weather-Proof Painted Metal Shell
PCB Board Circuit
SMT Process
Optional Panel Color
Red/Grey/Black/White
Warranty & Maintenance
12 Months & Lifetime
Trademark
Asenware
Transport Package
Seaworthy Package
Specification
UL/LPCB/CE/Rosh/ISO/SGS
Origin
Guangdong, China
HS Code
853110000
Model NO.
aw-cfp2166-32
Transmission Mode
Cable
Alarm Volume (within 1m)
≥100dB
Receive Frequency
Wire
Optional Zone Capacity
1-32
Power Supply
240VAC
Backup Battery
24VDC
Fire Detector
Photoelectric Smoke Detector
Temperature Alarm
Thermal Resistor Heat Detector
Wire System
2-Wire System
Exterior Housing
Weather-Proof Painted Metal Shell
PCB Board Circuit
SMT Process
Optional Panel Color
Red/Grey/Black/White
Warranty & Maintenance
12 Months & Lifetime
Trademark
Asenware
Transport Package
Seaworthy Package
Specification
UL/LPCB/CE/Rosh/ISO/SGS
Origin
Guangdong, China
HS Code
853110000
African 4-Zone Conventional Fire Alarm Control Panel

Key Descriptions:
1. R&D based on EN54 part 2 & 4 standard.
2. Modularized design & flexible extendable capacity.
3. Two-level control mode by a lock
4.27VDC power supply output.
5. FIRE PROTECTION, FIRE ROUTING and FAULT signal output, the output can be configured to dry relay type or wet sources type.
6.2 channel general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. RESET button to reset the panel.
10. SILENCE button to stop BUZZER and SOUNDERS.
11. EVACUATE button to start a manual fire alarm immediately.
12. TEST button to test all LEDs normally.
13. Low-battery protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
14. Optional GSM module is available for fire alarm by SMS.

Plus,
We have 3 series fire alarm control systems with time-tested performance:
1.2166 Series: Conventional fire alarm system with optional 1-32 zone panels.
2.2188 Series: Addressable fire alarm system for middle fire project with optional 100/200/324 addresses.
3.2100 Series: Addressable fire alarm control system for big fire project with minimum addresses starting from 648, 648*2, 648*N.

Any furher queries or requirements, please feel free to let me know timely.





 
ITEM1Zone panel2Zone panel4-8 Zone panel12-32 Zone panel
Model No.AW-CFP2166-01AW-CFP2166-02AW-CFP2166-04-8AW-CFP2166-12-32
Power specification
 
Mains supply voltage110VAC or 240VAC
Internal power supply27.2VDC
Total output current limited500mA @ 240VAC500mA @ 240VAC3A @ 240VAC3A @ 240VAC
Main supply monitor for faultYes
Battery protection for low voltageYes
Batteries (default configuration)12V2AH*2
Detector circuit specification
 
Number of circuit124-164-32
Line fault monitor for open circuitYes
Line fault monitor for short circuitYes
Line fault monitor for detector removalYes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodesSilicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zoneNo limit
Sounder circuit specification
 
Number of general circuits2
End of line resistor value6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuitYes
Line fault monitor for short circuitYes
Outputs fused AT400mA
Maximum number of bells @ 20mA of each sounder output20
Fuses
 
Battery fuse1.5A F 20mm
Sounder outputs500mA F 20mm
Fire and fault output
 
Output typeNC and NO relay
Maximum current100mA
Connection block
 
Largest acceptable conductor size2.5mm2
Smallest acceptable conductor size0.75mm2
Size and weight
 
 
Dimensions(mm)272*200*70mm320*231*90mm395X502X124362X565X124
Weight (without batteries)4kg5kg7kg8kg
Weight (with batteries)5.8kg6.8kg9.6kg12.5kg
 

Our company

Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

African 4-Zone Conventional Fire Alarm Control Panel
 


Product range:
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet

Welcome contact

 
mobile:0086-136-3251-2808

You Might Also Like