Products

Industrial Immersion Cartridge Heater Manufacturer

China Industrial Immersion Cartridge Heater Manufacturer, Find details about China Cartridge Heater, Electric Cartridge Heater from Industrial Immersion Cartridge Heater Manufacturer

Model NO.
1/8", 5/8", 1/2"
Magnesium Oxide
Japan Imported
Moistureproof
Yes
Waterproof
Yes
Temperature
450 Degree
Sheath Material
Stainless Steel 304
Warranty
12 Months
Thermocouple
J & K
Length
Customized
Standard Leadwire
300mm
Trademark
no
Transport Package
Carton Box, Wooden Case
Specification
3mm, 6.35, 8, 12.7
Origin
China
HS Code
851690100
Model NO.
1/8", 5/8", 1/2"
Magnesium Oxide
Japan Imported
Moistureproof
Yes
Waterproof
Yes
Temperature
450 Degree
Sheath Material
Stainless Steel 304
Warranty
12 Months
Thermocouple
J & K
Length
Customized
Standard Leadwire
300mm
Trademark
no
Transport Package
Carton Box, Wooden Case
Specification
3mm, 6.35, 8, 12.7
Origin
China
HS Code
851690100
Industrial Immersion Cartridge Heater Manufacturer

Industrial Immersion Cartridge Heater Manufacturer
 
 
1. Cartridge Heater Working Principle
Electric cartridge heater, also known as single-end tubular heater, one end can heat, another end is cold end.

It is made of a metal tube put into the resistance alloy wire as the heating materials, the alloy wire is filled with good insulation high purity magnesium oxide as filler, the product has a big power, high thermal efficiency, fast heat dissipation characteristics.
 
2. Cartridge Heater Characteristics
1>.USA imported MgO, it can ensure the heating uniformity
2>.Japan resistance wire, good heating performance.
3>.Alloy sheath for high corrosion resistance.
 
3. Cartridge Heater Parameters
Product NameElectric Cartridge Heater
Leakage current<0.5mA
Insulation resistance≥5M
Ground resistance<0.1Ω
Voltage resistanceno electric breakdown for 1 minute under 1500v
Temperature endurance100~1200 degree C
 
4. Cartridge Heater Structure

Industrial Immersion Cartridge Heater Manufacturer

5. Cartridge Heater Leadwires:
1>.Silicone rubber
2>. Teflon
3>. Metal hose
4>. Metal screen Braided

6. Different type cartridge heaters are available.
1>. High density cartridge heaters
2>. Low-mediem density cartridge heaters
3>. Split cartridge heaters
4>. Right angle Cartridge heaters
5>. Distributed wattage cartridge heaters
Industrial Immersion Cartridge Heater Manufacturer


7. Cartridge Heater Application
 
Water HeatingWe recommend 10 watts per square centimetre when cartridges are to be immersed in water because the water removes the energy from the element very effectively. Commonly used as a chemical solutions heater.
Oil Heating Commonly used as engine sump heaters. When heating some oils, only 2 watts per square centimetre can be used otherwise the high cartridge heater surface temperature causes the oil to oxidise and carbon to be built-up on the surface of the heater. When this occurs, the carbon can thermally insulate the cartridge heater, causing the unit to heat up internally, often resulting in electrical failure.
Air HeatingElements of approximately 1 watt per square centimetre are suitable for convection air heating, eg. Anti-condensation heaters.
Die HeatingManifolds, hot runners and torpedoes.
Packaging
Hot melt glue applicators.

8. Cartridge Heaters Package
Industrial Immersion Cartridge Heater Manufacturer
Industrial Immersion Cartridge Heater Manufacturer


9. How to order?
Please offer these information:
1.Type of Cartridge Heater (shape, striaght or right angle)
2.Diameter of Tube
3.Overall length for Cartridge Heaters.
4.Wattage & Voltage
5.Lead type ( glass fibre / PTFE ) & lead length. 
6.The lead wire length.

You Might Also Like