7049 Aluminum Alloy Sheet Round Bar Forgings

China 7049 Aluminum Alloy Sheet Round Bar Forgings, Find details about China 7049 Aluminum Alloy Sheet Round Bar Forgings, 7049 Aluminum Alloy Sheet from 7049 Aluminum Alloy Sheet Round Bar Forgings

Basic Info.

Model NO.

7049

Surface Treatment

Enameled Wire

Alloy

Elongation

More Than 10%

Trademark

Chalco Aluminum

Transport Package

Export Standard Wooden Pallet

Specification

According to Customer Requirement

Origin

Henan China

HS Code

7606125900

Model NO.

7049

Surface Treatment

Enameled Wire

Alloy

Elongation

More Than 10%

Trademark

Chalco Aluminum

Transport Package

Export Standard Wooden Pallet

Specification

According to Customer Requirement

Origin

Henan China

HS Code

7606125900

Product Desciption

7049 aluminum alloy sheet round bar forgings

On the basis of 7001 alloy, the contents of alloying elements Cu and Cr are reduced, the ratio of Zn/Mg is increased, and the impurity content of Fe and Si is reduced. It is also used to produce forgings and backfill parts of T73 state, and also to produce thick plates and sheets. The crack growth rate of stress corrosion cracking is much lower than that of 7075 T651 at the same time that the strength is not less than 7075 T6 alloy. The 7049 aluminum alloy forgings profile sheet alloy is mainly used in aircraft main landing gear, missile parts

Alloy	Alloy series00	Mean features	σb Value/MPa	Working Temperature/ºC
7049	7049 series(Europe)	On the basis of 7001 alloy, the contents of alloying elements Cu and Cr are reduced, the ratio of Zn/Mg is increased, and the impurity content of Fe and Si is reduced. It is also used to produce forgings and backfill parts of T73 state, and also to produce thick plates and sheets. The crack growth rate of stress corrosion cracking is much lower than that of 7075 T651 at the same time that the strength is not less than 7075 T6 alloy.	~	<125

Alloy	Mean features	Types: Temper	Application parts and typical parts
7049	In place of 7079 alloy, the strength and resistance to SCC are good and the resistance to ordinary corrosion is not strong.	Extruded aluminum profile:T73511,T76511 Aluminum forgings: T73,T7352 Aluminum sheet and plate:T73	Aircraft main landing gear, missile accessories.