Products

Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor
Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor

Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor

China Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor, Find details about China 6800UF Snap-in Capacitor, Snap-in E Cap from Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor

Model NO.
Tmcf18
Electrolyte
Electrolytic
Tuning
Electrolytic Capacitor
Filter
Aluminum Electrolytic Capacitor
Number of Pins
Two
Size
35*70
Voltage
100V
Trademark
TOPMAY
Transport Package
Bulk
Specification
CE RoHS
Origin
China
HS Code
8532229000
Model NO.
Tmcf18
Electrolyte
Electrolytic
Tuning
Electrolytic Capacitor
Filter
Aluminum Electrolytic Capacitor
Number of Pins
Two
Size
35*70
Voltage
100V
Trademark
TOPMAY
Transport Package
Bulk
Specification
CE RoHS
Origin
China
HS Code
8532229000
                               TMCE18 Snap-In Terminal Aluminum Electrolytic Capacitor 85/105ºC
Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic CapacitorLarge Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor
Large Can 6800UF Low Impedance Snap-in Terminal Aluminum Electrolytic Capacitor

Key Specifications/Special Features:

Rated voltage range: 10 to 100V and 160 to 400V
Capacitance tolerance (25° C 120Hz): 0 to 20%
Leakage current (uA): 0.02CV or 5mA, whichever is smaller (at 25° C after five minutes)
C: Nominal capacitance (uF)
V: Rated voltage (V)
Dissipation factor (25° And 120Hz): TTND shall not exceed the values shown in the table of standard ratings
Temperature stability (120Hz): Capacitance change
10 to 100V DC: Capacitance at -40° C shall not be less than 60% of the 25° C value
160 to 400V DC: Capacitance at -25° C shall not be less than 70% of the 25° C value
Load and shelf life (+85° C):
Time: 2, 000 hours
Leakage current: Not more than specified value
Capacitance change: Within ± 20% of initial value
Dissipation factor: Not more than 200% of specified value
After test: UR to be applied for 60 minutes, 24 to 48 hours before measurement
Suitable for switching power supply
Operating temperature range: -40 to 85 and -25 to 85° C
Disclaimer: All images with trademarks are shown for reference purposes only. We are not authorized to sell any items bearing such trademarks.
 
ItemCharacteristics
Rated Voltage Range10~450V.DC
Operating Temperature
Range		-40ºC~105ºC
Capacitance Tolerance±20%(M)  (25ºC,100 or 120Hz)
Leakage CurrentI≤ 3 (mA)
Whichever is greater after 5 minutes at 25ºC.
Dissipation Factor
UR(V)200250~450
tgδ0.150.20
     (25ºC,100 or 120Hz)
Low Temperature
Characteristics		Impedance ratio at 100Hz or 120Hz shall not exceed the values given in the below table.
UR(V)10~3550~100200~250400~450
Z-40ºC/Z2510677
Load  LifeAfter application of rated voltage with ripple current for 2000hours at 105ºC,the following specification shall be satisfied.
Capacitance ChangeWithin ±20% of the initial value
 Dissipation FactorNot more than 200% of the specified value
Leakage CurrentNot more than the specified value
OthersMeet Q/RME 149-2013, GB/T 5993-2003

You Might Also Like