Building Wall Use Aluminum/Aluminium Alloy Coil:
Product Description:
1), Alloy we supply:
3003/3004/3103/3105
For the above-mentioned alloy, you may be interested in:
CC aluminum coil: Means Continuous Casting coil, it can not be used for deep drawing and anodising, but it can be bend over 90 degrees.
DC aluminum coil: Means Direct casting coil, it can be used for deep drawing and anodising.
2), Size we supply:
Thickness: (0.15-6.0)mm, Width: 1000/1220/1250/1300/1350/1500/2000mm/2500mm(maximum), and other special width.
Length: Coil
Thicnk tolerance: +/-0.03mm
3), Temper:
HO/H14/H24/H16/H18/H19
4), Packing:
For Sheet Packing:
2-2.5mts per pallet, standard international export packing,
For Coil Packing:
Eye to wall or Eye to Skype packing, 2-3mts per coil or 5-7mts per coil,
Coil ID: 505MM/508MM
Customer may require interleaf papers into sheets or require blue protective PE film on sheet&coil surface.
5), Coil/ sheet surface requirement:
No scratches, white corrosion, water stain, black stain marks, oil stain or streak marks.
6), Ending Application:
Construction, decoration, electronic products, wall Cladding, Truck body, Signboard, Insulation, Strip Ceiling and etc.
Terms and conditons:
1), Trade temr: CIF/CFR/FOB/EXW
2), Payment term: TT/West Union/100% Irrevocable L/C at sight
3), Shipment: It will cost us about 25-30 days after 30% deposit reaching our USD bank account(TT) or after we receive the L/C copy.
4), MOQ: 2tons for each thickness.
5), Quantity tolerance: +/-10% of total quantity as confirmed PI
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Other | Al |
| Single | Total |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.6 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.5 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | _ | 0.1 | _ | _ | 0.05 | 0.15 | 99 |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 |
| _ | _ | 0.1 | _ | 0.05 | 0.05 | 0.15 | 99 |
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | _ | 0.1 |
| _ | 0.05 | 0.15 | R |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | _ | _ | 0.25 |
| _ | 0.05 | 0.15 | R |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.20~0.6 | 0.1 | _ | 0.25 |
| 0.1 | 0.05 | 0.15 | R |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | _ | 0.4 |
| 0.1 | 0.05 | 0.15 | R |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | _ | 0.25 | _ | _ | 0.05 | 0.15 | R |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | _ | 0.1 | _ | _ | 0.05 | 0.15 | R |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |