Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

China Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I, Find details about China Industrial Ethernet Converter, RS485 to Ethernet Converte from Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

Processor
Cortex M4
Serial Port Number
2 (RS232/485/422*2)
Serial Interface Standard
RS-232: dB9 Pin Type, RS-485: 2 Wire, RS-422
Baud Rate
RS-232: 600 BPS ~ 230K BPS, RS-485: 600 BPS ~ 1m
Ethernet Port Number
1
Ethernet Interface Standard
RJ45
Network Protocol
IP, TCP, UDP, DHCP, DNS, Https, ARP, ICMP, Web
Trademark
FOCUS
Transport Package
Box+Carton
Specification
150 x 79 x 30 mm
Origin
Shandong
HS Code
8517629900
Processor
Cortex M4
Serial Port Number
2 (RS232/485/422*2)
Serial Interface Standard
RS-232: dB9 Pin Type, RS-485: 2 Wire, RS-422
Baud Rate
RS-232: 600 BPS ~ 230K BPS, RS-485: 600 BPS ~ 1m
Ethernet Port Number
1
Ethernet Interface Standard
RJ45
Network Protocol
IP, TCP, UDP, DHCP, DNS, Https, ARP, ICMP, Web
Trademark
FOCUS
Transport Package
Box+Carton
Specification
150 x 79 x 30 mm
Origin
Shandong
HS Code
8517629900

ST-TCP520i
2 Ports Serial to Ethernet Servers
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

 

2-port serial to Ethernet servers ST-TCP520I can realize transparent transmission between TCP/UDP data package and RS232/RS485/RS422 interface.

2-port RS-232/422/485 serial to Ethernet servers
Power supply accepts wide voltage input range DC 5-36V
Support TCP server/client, UDP server/client, https client, Virtual COM
Support Modbus RTU to Modbus TCP
Support flow control CTS/RTS, XON/XOFF
Support 2 RS-232, RS-485/422 3IN1 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface
Configuration via Web Server page, AT commands, and Windows Utility


Technical parameters 
System Information
ProcessorCortex-M4
Basic Frequency120MHz
Flash512K byte
Ethernet
Port Number1
Interface StandardRJ45
Rate10/100 Mbps MDI/MDIX, auto switch between cross and direct connection
Protection2KV electromagnetism isolation, shell insulation blocking
Network ProtocolIP, TCP, UDP, DHCP, DNS, https, ARP, ICMP, Websocket, httpsD Client
Receive BufferMax 16k bytes buffer
Serial
Port Number2 (RS232/485/422*2), 2 serial ports can simultaneously work at the different working modes.
Interface StandardRS-232: TX/RX/RTS/CTS
RS-485: A+/B- 
RS422: TX+/TX-/RX+/RX-
Data Bits5, 6, 7, 8
Stop Bit1, 2
Check BitNone, Even, Odd, Space, Mark
Baud Rate600 bps ~ 230K bps
Flow ControlRTS/CTS/Xon/Xoff
BufferSend and receive 2k bytes respectively
ProtectionESD protection, anti-surge
SocketA 
Transparent Transmission ModeTCP Server/TCP Client/UDP Server/UDP Client
Supported FunctionNetworking printing, Modbus Gateway, USR-Cloud, self-defined registration package, self-defined network and serial heartbeat package
SocketBTCP Client/UDP Client
Software
Virtual Serial(USR-VCOM)Windows 2000 or higher (32 bit/64 bit)
ConfigurationBuilt-in webpage, computer set-up software, serial command
Basic Parameter
Size150 x 79 x 30 mm
Operating Temp.-40 ~ 85°C
Storage Temp.-45 ~ 105°C, 5 ~ 95% RH
Input VoltageDC 5 ~ 36V
Working Current95mA (aver) @ 5V
45mA (aver) @ 12V
Power<1W
More
CertificateCE, FCC, ROHS, KCC and WEEE pending
Warranty2 years
Accessory12V power supply, serial line, cable, converter

Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I 

Basic Function of Serial to Ethernet Servers 
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I


Serial Ports

  1. Baud rate: 600bps~230.4Kbps
  2. Hardware fow control: RTS/CTS
  3. Software fow control: XON/XOFF
  4. Seria data can be divided into frames flexibly
 

Serial Port Switching Among RS232/RS485/RS422

Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

Work mode

TCP Server

Serial to Ethernet servers ST-TCP520I listens on the setting port and waits for a TCP client connection. The data which the serial ports sent out transparently transmit to all connected TCP clients via ST-TCP520I.Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

TCP client mode

Serial to Ethernet servers ST-TCP520I initiates a TCP connection to the set IP address.
If the connection fails, ST-TCP520I will keep trying to reconnect until it succeeds. Once the connection is successful, the data will be transparently transmitted between PC and serial device in bi-directional.
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

UDP mode

Serial to Ethernet servers ST-TCP520I will transmit serial data from serial device to target network device by UDP connection. ST-TCP520I will listen to port and transmit all received data to serial device.
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

httpsD Client

Supports https Client mode which can transmit serial data to the https server in https format(GET/POST).
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

WebSocket

Supports WebSocket Sever,Built Websocket link with devices by Websocket of webpage HTML5.Data transmission between built-in webpage and serial port in bi-directional Custom webpage and websocket are acceptable Achieves the functions of displaying data in real-time

 

Features

Socket B function

Serial to Ethernet servers ST-TCP520I supports the secondary network link, which can send data to two servers. Used for data backup, remote diagnosis, and other requirements.

Support modbus gateway

Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

Application

Unattended Weighing System

Connect serial to Ethernet servers ST-TCP520I to barrier gate and it can realize remote control of barrier gate by Ethernet in control center.
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I

Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I
 
Modbus RTU to Modbus TCP 2 Ports Serial to Ethernet Servers Model: St-TCP520I