Automatic Cardboard Laminator Machine

1. Specifications
 2. Main features of the machine
a) High precision: ± 0.5 mm which can make the latter process more easy to achieve.
b) High Speed: 150 pieces per minutes.
c) Wide range of application: 100-800g face paper and 200-2000g bottom paper can be used on the machine.
d) Glue saving: It can save 5g/2 with the unique anilox roller.

3. Introduction of the machine:
  
a) Function of the machine:  The machine can laminate card to card together to make tags, boxes etc.
b) Structure:
    Upper Feeder: 110-800 gsm paper
    Lower Feeder: 180-800 gsm paper
    Compressor:  Compress the laminated paper and conveying them to the piling part.
    Paper piling part:  To pile the laminated paper


    Gluing Part:  To glue on the bottom paper
    Registration Part: To ensure precise paper lamination.

4. Features By Part:
a) Feeding part
The machine adopts mature high speed feeding structure with simple operation, easy maintenance which can fit to various kinds of paper.



1) Four sucking and five forwarding which can do feeding of thin paper and wrapped paper.
2) Double sucking rubber and single rubber forwarding which can avoid effectively double paper.
3) Equipped with two blower to ensure paper separation smoothly.
b) Side blower
There are two side blowers as well. The position of the side blower can be adjusted to ensure the smooth feeding of paper.

c) Registration Adjustment:
1) The operator can adjust the registration place of the paper either the wheel or by the fine adjustment handle to adjust the left and right position.
2) For the in lamination, you can adjust the wheel according to the number it shows.
3) The registration of lamination can be done when the paper is running. When fineadjustment is needed, you can only press related button to do the adjustment.
4) The registration of the piling can be achieved by pressing the related buttons on the panel.
5) Both of the pressure and glue volume adjust is easy by turning the adjustment wheel. You can record down the number in case you will have the same paper size.
6) Three pressing belt to ensure smooth running of the paper.

7) Special pressing roller to insure high precision.
8) Paper Jam detector is equipped after lamination.


9) To protect paper roller with the roller, 6 anti-roll device is equipped with the machine.


10) Two washing rollers are equipped with the machine, one is under gluing roller and one is under pressing roller to keep clean of the paper.
11) Anilox roller makes the glue consumption even and less ( PVA is test for 30 gsm)
12) Main bearings are NSK brand.
13) Main electrical components are adopts famous brand, with features of long lifespan and good quality.
    
14) Baumer Detector

16) Paper after lamination