5 Layer 3D FFP2 Face Masks Wholesale Supply for Protective Virus Approval Standard En149: 2001

China 5 Layer 3D FFP2 Face Masks Wholesale Supply for Protective Virus Approval Standard En149: 2001, Find details about China N95, Fashion Face Mask from 5 Layer 3D FFP2 Face Masks Wholesale Supply for Protective Virus Approval Standard En149: 2001

Basic Info.

Model NO.

XRFF-0024

Trademark

OEM

Transport Package

1PC/Bag, 20bags/Box, 400bags/Carton

Specification

Normal

Origin

Shenzhen

HS Code

630790

Model NO.

XRFF-0024

Trademark

OEM

Transport Package

1PC/Bag, 20bags/Box, 400bags/Carton

Specification

Normal

Origin

Shenzhen

HS Code

630790

Product Desciption

5 Layer 3D FFP2 Face Masks Wholesale Supply for Protective Virus Approval Standard EN149:2001

Specifications:

Name:5 Layer 3D FFP2 Face Masks Wholesale Supply for Protective Virus Approval Standard EN149:2001
Materials:
• Straps - Natural Rubber
• Nose-clip - Plastic
• Filter - Polypropylene
• Nose foam - Polyurethane
• Valve - Polypropylene/Polyisoprene

Color: White
Type: Cup type without breathable Valve
Package:1PC/bag,20bag/box,400bags/carton
Applications:
• Rubber/Plastics    • Engineering
• Pharmaceuticals   • Agrochemicals
• Construction     • Pottery/Ceramics
• Market Gardening    • Laboratories
• Agriculture   • Quarrying
5 Layer 3D FFP2 Face Masks Wholesale Supply for Protective Virus Approval Standard En149: 2001

Approvals:
Meets the performance requirements of the European Standard for filtering facepiece dust respirators EN149:2001 FFP3 BEF99%

Features:

Cup-shaped disposable respirator with adjustable nose clip and elastic headband
Exhalation valve reduces heat build-up inside the respirator for comfort
Protects against low-level, non-hazardous dusts and oil- or water-based mists
Sturdy inner shell and convex shape avoids collapsing in
Easy to use with a good, comfortable seal
High Protection:99%(FFP3)

.
Fitting Instructions:

Cup the respirator in your hand with the nosepiece at your fingertips allowing the headbands to hang freely below your hand.
Position the respirator under your chin with the nosepiece up.
Pull the top strap over your head resting it high at the top back of your head. Pull the bottom strap over your head and position it around the neck below the ears.
Place the fingertips of both hands at the top of the metal nosepiece. Mould the nosepiece to the shape of your nose by pushing inward while moving your fingertips down both sides of the nosepiece. Pinching the nosepiece using one hand may result in less effective respirator performance.
The seal of the respirator on the face should be fit-checked prior to wearing in the work area.
a) Cover the front of the respirator with both hands, being careful not to disturb the position of respirator.
b) Inhale sharply. A negative pressure should be felt inside the respirator. If any leakage is detected, adjust position of respirator and/or tension of strap. Retest the seal. Repeat the procedure until the respirator is sealed properly